Overhead DVD Player
Lecteur de DVD monté au plafond | Reproductor de DVD de montaje en techo
NS-M10OHD
If the temperature inside the vehicle is very
immediately, or internal components may
short circuit. Keep the player turned off for
about an hour until the condensation
evaporates.
Welcome
Congratulations on your purchase of a
high-quality Insignia product. Your NS-M10OHD
represents the state of the art in automobile DVD
player design and is designed for reliable and
trouble-free performance.
•
•
In extremely cold temperatures, the
Contents
movement of the picture may be slow and the
picture may be dark. This is not a
Safety information . . . . . . . . . . . . . . . . . . . . . . . . .3
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Setting up your DVD player . . . . . . . . . . . . . . . . . .5
Using your DVD player. . . . . . . . . . . . . . . . . . . . . .7
Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .12
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Warranty information . . . . . . . . . . . . . . . . . . . . . .13
malfunction. The player will work normally
once it reaches its operating temperature.
Do not drop or hit the LCD panel with a hard
object. Doing so may cause permanent
damage to the LCD panel. Should the LCD
panel break, avoid touching any glass and
fluid. If you do come in contact with the glass
or fluid, wash your skin with plenty of water
and seek medical attention immediately.
Due to different vehicle specifications, make
sure that the player is correctly located and
not obstructing the rear view mirror and
air-conditioning vent.
Français. . . . . . . . . . . . . . . . . . . . . . . . 14
Español . . . . . . . . . . . . . . . . . . . . . . . . 26
•
Safety information
•
The player is designed for use in a 14 V DC
vehicle.
•
•
Use the supplied screws to attach the metal
mounting plate.
Refer any questions to Insignia technical
support.
•
Do not operate the player in any way other
than described within this guide. Failure to
follow the instructions within the guide will
invalidate your warranty.
Caution
•
•
Safety first—Do not install the player where it
may obstruct the driver’s vision, impair the
performance of any of the vehicle’s operating
systems or safety features, including airbags,
or impair the driver’s ability to safely operate
the vehicle.
When using the player, make sure that you
are firmly secured by your seat belt to make
sure that you do not accidentally hit your
head on the screen during sudden braking or
other incidents. If you are ever in an accident,
injuries can be more severe if the seat belt is
not correctly buckled.
Before installing this player, check your local traffic
rules and regulations for restrictions on placement
or use of the player.
Features
This player is a roof mount 10.2" TFT-LCD color
display with a DVD player that can be used as a
stand-alone player. It can also be integrated into
a mobile multimedia system. The player has the
following features:
•
•
•
10.2" TFT-LCD color monitor (16:9)
Roof mounting hardware
Pixels: 800 x 480
High brightness: 350 cd/m2
NTSC and PAL compatible
Adjustable color, contrast, brightness, and
tint
Manual viewing angle adjustable up to 150°
Built-in white LED dome light
•
•
Do not try to install or service your player by
yourself. Installation or servicing of the player
by persons without training and experience in
electronic equipment and automotive
accessories may be dangerous and could
expose you to the risk of electric shock or
other hazards.
Be careful not to drain the vehicle battery
while using the player with the engine
stopped. To avoid draining the battery, we
suggest that the engine always run while
using the player.
•
•
•
•
•
•
•
Automotive startup protection
Built-in IR transmitter for wireless
headphones
•
•
Do not disassemble or alter the player in any
way, or you may damage the player and
invalidate the warranty.
Never clean the surface of the screen with a
chemical solvent or corrosive detergent,
which may cause permanent damage to the
TFT LCD screen.
•
•
•
•
•
•
IR remote control
On-screen display
Two AV inputs
One AV output
Slot DVD mechanism
FM transmitter
•
Avoid installing the player where it will be in
direct sunlight or near a hot air vent. Note
that the normal working temperature of the
player is between 23° to 122°F (-5° to 50°C).
If the internal temperature of the vehicle is
extremely high, a short cooling down period
is necessary before operating the player.
3
•
Capability to read these 12 cm discs:
Item
Description
•
DVD
12
13
Press to eject the disc.
EJECT ( ) button
Reset button
•
DVD R
Press with a pencil or other
narrow-tipped tool to reset the player.
•
•
•
•
•
•
DVD RW
CD-DA
CD-RW
MP3
VCD
SVCD
14
15
IR window
Receives IR signals from the remote
control and sends IR signals to IR
wireless headphones.
Display shutoff
switch
Turns off the display when the LCD
screen is closed.
16
17
Panel open button
Mounting holes
Press to open the LCD panel.
Note
Multi-session CDs cannot be played on this player.
Connect the player to the mounting
plate with screws inserted into these
holes.
Display
18
Disc slot
Insert the disc into this slot.
Remote control
SETUP
MUTE
ON OFF DOOR
PBC
RANDOM
DISPLAY
GO TO
ENTER
RETURN
MENU
TITLE
1
4
7
2
5
3
6
SUB-
TITLE
8
9
REPEAT
A-B
AUDIO
0
ANGLE
ZOOM
Panel Control
Item
Description
1
Dome light
Provides an interior light for the
vehicle.
A/V
MENU
2
3
Power button
MENU button
Press to turn on or turn off the player.
• Press to open the menu.
• Press to select a menu item.
4
AV input source
button
Press to select the video input mode
(DVD-IN, AV IN1, or AV IN2)
Item
Description
5
6
(-) button
(+) button
Press to reduce a value in the menu.
1
2
ZOOM
Press to set the zoom for movie
viewing.
Press to increase a value in the
menu.
ANGLE
Press to select a different filming angle.
This feature only works if the DVD is
recorded with multiple angles.
7
Dome light switch
• Move to the ON/OFF position,
then press it to turn the dome
light on or off.
• Move to the DOOR position to
turn the dome light on or off
by opening or closing the
door. This feature works only
when the dome light green
wire is connected to the door
sensor.
3
4
REPEAT
0-9
Press to repeats the track or the entire
disc.
Press to enter numbers directly, such
as for settings or track numbers.
5
6
PLAY
Press to play the CD or DVD.
Previous and next Press the left button to go to the
previous chapter or track, and press
the right button to go to the next
chapter or track.
8
9
Press to skip to the previous track or
chapter.
SKIP - ( )backward
button
Press to skip to the next track or
chapter.
SKIP + ( )forward
button
10
11
Press to stop playback.
STOP ( ) button
Press to play or pause a disc.
PLAY/pause (
button
)
4
Item
Description
Setting up your DVD player
Package contents
7
Rewind and fast
forward
Press the left (rewind) button to
navigate in the menu or press to
reverse playback at 2×, 4×, 8×, and 20×
speeds.
Press the right (fast forward) button to
navigate in the menu or press to fast
forward playback at 2×, 4×, 8×, and
20× speeds.
Item
Quantity
Player
1
1
1
2
4
6
6
6
4
1
1
1
IR remote control with battery
AV cable
8
9
Arrow and ENTER Press to navigate in a menu and
buttons
change setting values.
IR wireless headphones
AAA batteries for IR headphones
ST 4.2×25.4 screw
ST 4.2×38.1 screw
ST 4.2×50.8 screw
CM 4×8 screw
PBC
Press to turn off or on playback under
the track menu. Available only on
VCD 2.0 discs.
10
11
Power
Press to turn the player on or off.
SETUP
Press to access the OSD menu to
modify the DVD player settings.
12
13
14
MUTE
Eject
Press to turn the sound on or off.
Press to eject the disc.
Metal mounting plate
User guide
RANDOM
Press to play chapters or tracks in
random order.
Rubber gasket
15
DISPLAY
Press to display the playback
information (such as title, chapter,
track, and time).
Caution
Use only the contents of this package to install and
use the DVD player. Use of any accessories not
provided with this player may result in damage to the
player.
16
17
GO TO
Press to start playback at a selected
time or chapter.
RETURN
Press to return to the main menu.
Press again to return to the last
position of playback.
Installing your DVD player
Warning
Do not try to install or service your player by yourself.
18
19
Stop
Press to stop playback.
Installation or servicing of the player by persons
without training and experience in electronic
equipment and automotive accessories may be
dangerous and could expose you to the risk of electric
shock or other hazards.
MENU
Press to view the DVD disc’s main
menu.
20
21
22
TITLE
Press to view the DVD disc’s title
menu.
SUBTITLE
AUDIO
Press to select and turn on subtitles
during playback.
Press to change the audio language
during DVD playback. Press to change
the audio channel (Left, Right, Stereo)
during VCD and CD playback.
23
A-B
Press to repeat playback from point A
to point B.
24
25
A/V
Press to change the input source.
- (adjust)
Press to change a setting in the player’s
menu.
26
27
MENU
Press to open the player’s setup menu.
+ (adjust)
Press to change a setting in the player’s
menu.
5
Wiring connections
To install the player:
1 Move the polarity switch fully to the correct
polarity of your vehicle’s power supply
system. To determine your vehicle’s polarity,
see its user guide or call the dealer.
•
If your vehicle’s power supply system is
negative, set the switch to -.
•
If your vehicle’s power supply system is
positive, set the switch to +.
Caution
Do not move the position of the switch after
installing the player, or the player may be
damaged.
Battery lead + (yellow)
ACC lead (red)
2 To prevent short circuits, remove the key from
the ignition and disconnect the battery from
the vehicle.
Ground lead (black)
Door lead (green)
3 Disconnect the original dome light.
4 Attach the metal mounting plate to the roof
using the ST 4.2×25.4, ST 4.2×38.1, or
ST 4.2×50.8 screws.
Caution
Do not cover the original dome light opening.
FM Antenna
Polarity switch
Six ST 4.2×25.4, ST 4.2×38.1, or
ST 4.2×50.8 screws
Item
Description
AV IN2
Secondary input for external audio/video
sources.
5 Pull the original dome light power wire and
power/signal cable through the original dome
light opening.
AV OUT
Output for the player’s audio/video to
external displays or sound systems.
6 Place the rubber gasket on the DVD player.
AV IN1
Primary input for external audio/video
sources.
Battery lead +
ACC power lead
Ground lead
Door lead
Connect this to the positive terminal lead
of the car battery.
Connect this to the engine accessory
power lead.
Connect this to a negative terminal lead of
the vehicle battery.
Connect this to the door sensor lead, so
the player’s dome light can be turned on
and off by opening or closing the door.
7 Connect the input and output cables.
FM antenna wire
Polarity switch
This wire sends the FM transmitter signal
to an FM receiver.
8 Connect the wire harness in the following
order: ground lead, battery lead, ACC lead,
and door lead.
Slide this switch fully to the correct
polarity of your car’s power supply
system.
6
9 Attach the DVD player to the metal mounting
plate using the CM 4×8 screws.
2 Swing the LCD panel downward to the
desired angle.
Caution
The LCD panel opens to a maximum angle of
150°. Do not try to open it farther.
150°
3 To close the player, swing the LCD panel
Four CM4×8 screws
upward until you hear the lock click.
Warning
For safety of the vehicle occupants, close the LCD
panel when it is not in use.
10 Reconnect the battery.
Caution
Make sure that cords and other items do not get
caught in the panel when you close it.
Note
•
•
•
Remember to connect the red wire to the
ignition switch (ACC), or the vehicle’s battery
might be drained.
Using the remote control
Installing the remote control battery
If the fuse is blown, make sure that the cables
have not caused a short circuit, then replace
the old fuse with a new one of the same rating.
Do not allow unconnected cables or terminals
touch the metal on the vehicle or any other
conducting material. Thoroughly wrap exposed
wiring with electrician’s tape or use wire caps.
To prevent short circuits, do not remove the
caps from unused terminals or from the ends of
the unconnected cables.
Before using the remote control, you must install
the included battery.
To install the battery:
1 Slide the battery holder to the right (as
shown) while at the same time pulling it away
from the remote control.
•
•
After the player is installed, make sure that the
brake lights, blinkers, wipers, and other devices
on the vehicle are working correctly.
Using your DVD player
Opening and closing the DVD player
To open and close the DVD player:
1 Press the Open button to unlock the LCD
panel.
2 Place the battery with the (+) side up in the
battery holder. (Use battery type CRD2025.)
Open button
7
|