Insignia Stereo System NS HZ308 NS HZ308 C User Manual

Quick Setup Guide

RF Modulator AV Signal Converter NS-HZ308 / NS-HZ308-C

Thank you for purchasing this high-quality Insignia

Connecting your RF Modulator

RF Modulator. This product is designed to connect AV

components with no RF (coaxial) output, such as

Blu-ray/DVD players, gaming systems, etc., to an

older TV that has only an RF input.

1 Connect a composite AV cable (not included) from

the AV output jacks (yellow for video; red and white

for stereo audio) of the source component

(Blu-ray/DVD player, gaming system, etc.) to the

corresponding color-coded input jacks on the

RF Modulator.

Package contents

• RF Modulator

• Power adapter

• Quick Setup Guide

Note: For mono AV components, use only the yellow and

white connectors of the composite AV cable.

Required parts

The following items (not supplied) are required:

• One composite AV cable with three RCA

connectors (yellow, red, and white) at each end.

• One 75-ohm coaxial cable

Features

ANT IN

TO TV

2 Connect the coaxial cable to the TV using one of the

following methods that matches your setup:

• If you have an RF TV source, such as a cable/satellite

box or TV antenna, connected to the TV, disconnect

that component from the TV and connect the coaxial

cable to the ANT IN jack on the RF Modulator.

Connect a separate coaxial cable from the TO TV

jack on the RF Modulator to the RF input jack on the TV.

• If you do not have an RF TV source, connect a

coaxial cable from the TO TV jack on the

CH 3/4

VIDEOIN

AUDIO IN

DC IN

RF Modulator to the RF input jack on the TV.

Note: If your TV has only 300-ohm VHF screw terminals,

use a 75-ohm-to-300-ohm matching transformer to

complete the connection.

Before using your new product, please read these instructions to prevent any damage.