Two-Way Full Range
Loudspeaker System For
Permanent Installation
SP215-9
Sound Power Series
Key Features:
TM
снд VGC (Vented Gap Cooled ) LF transducer
снд Opt Apt HF horn with 1.5" exit
compression driver
снд Trapezoidal enclosure for easy cluster
arrangements
снд DuraFlex ямБnish, tough, weather resistant
and paintable
снд Internal tamper resistant Bi-Amped/Passive
selector
снд 12 Suspension points (M10 Thread)
снд Advanced Network Topologies for smooth
power response and stable ampliямБer
loading
The model SP215-9 is a true, full range
system that provides unprecedented bandwidth
and maximum SPL in a single system package.
With nominal 90┬░ coverage pattern, systems
can be splayed together for additional
coverage and/or SPL requirements. The
SpeciямБcations:
TM
powerful 15" VGC (Vented Gap Cooled ) LF
System:
Freq. Range (-10 dB): 33 Hz - 20 kHz
Freq. Response (-3 dB): 42 Hz - 18 kHz
Horz. Coverage Angle (-6 dB): 95┬░ averaged 500 Hz to 16 kHz
Vert. Coverage Angle (-6 dB): 60┬░ averaged 500 Hz to 16 kHz
Directivity Factor (Q): 10.0 averaged 500 Hz to 16 kHz
Directivity Index (DI): 10.0 averaged 500 Hz to 16 kHz
System Sensitivity : 97 dB, 1 W @ 1 m (3.3 ft)
Rated Maximum SPL: 131 dB, @ 1 m (3.3 ft)
System Nominal Impedance: 8 Ohms
System Input Power Rating : 600 W, IEC; 2400 W Peak
Recommended AmpliямБer : 800 W
transducer provides powerful transient bass.
TM
The proven Optimized Aperture HF horn
coupled to a 2447J, 1.5" exit compression
driver delivers a precise, clear and controlled
high frequency response.
1
The SP215-9 is equipped with a passive
crossover that can be switched to bi-ampliямБed
use via an easily accessible internal tamper
resistant selector. Bi-ampliямБed mode, utilizing
the DSC260 digital controller for crossover,
signal alignment, and equalization functions,
provides optimum system performance.
The SP215-9 is part of the JBL Sound
Power Series, a family of modular loudspeaker
systems designed for ямБxed installation
applications ranging from speech reinforcement
to large scale music productions. All models
are ямБtted with suspension points that accept
M10 threads. The enclosures are ямБnished with
a hard wearing, weather resistant, textured
ямБnish DuraFlex. Premium 13 ply wood and
an 18 gauge steel, foam-backed grille enable
Sound Power systems to comply with
2
3
Recommended Controller: DSC260
Passive Crossover: 1.2 kHz
Transducers:
Low Frequency: 2226H, 380 mm (15 in) dia., 100 mm (4 in)
edgewound ribbon voice coil
Nominal Impedance: 8 Ohms
Input Power Rating: 600 W, AES; 2400 W Peak
1
Sensitivity : 97 dB, 1 W, @ 1 m (3.3 ft)
Calculated Maximum SPL: 131 dB, @ 1 m (3.3 ft)
Recommended AmpliямБer : 800 W
3
High Frequency: 2447J; 100 mm (4") diaphragm and voice coil dia.,
76 mm (1.5") throat dia.
Nominal Impedance: 16 Ohms
Input Power Rating: 75 W, AES; 300 W Peak
1
Sensitivity : 111 dB, 1 W, @ 1 m (3.3 ft)
Calculated Maximum SPL: 136 dB, @ 1 m (3.3 ft)
3
Recommended AmpliямБer : 200 W
environment test speciямБcations.
Components:
Physical:
Enclosure: Trapezoidal, 22.5┬░ side angles, birch plywood
Environmental SpeciямБcations: Mil-Std 810, IPX4 per IEC 529
Suspension Attachment: 12 points; accepts M10 threaded hardware
Finish: Black DuraFlex coating
The SP215-9 utilizes one of JBLтАЩs ямБnest
cone transducers, the 2226H. The 15" 2226H
is part of JBLтАЩs family of Vented Gap Cooled
woofers and carries an AES power rating of
600 watts with minimal power compression.
The cone has been treated for weather
resistance.
Grille: Black powder coated zinc treated 18 gauge
perforated steel grille with foam backing
Input Connectors: 2 x NL4 Neutrik Speakon connectors
Dimensions: 737 mm x 451 mm x 451 mm (29.00 in x 17.75 in
x 17.75 in)
Net Weight: 38.1 kg (84 lbs.)
The 38mm (1.5 in) exit 2447J large format
compression driver is coupled to an Optimized
1
Measured on axis in the far ямБeld with 1 watt (2.83 V RMS, 8 ohms) input and referenced to 1 meter distance using the
inverse square law. Listed sound pressure represents an average from 300 Hz to 16 kHz.
┬о
Aperture Bi-Radial horn providing smooth
2
IEC Spectrum for 2 hours with +6 dB crest factor.
3
even coverage. The Optimized Aperture horn
provides lower throat distortion than its earlier
predecessors while extending frequency
response to nearly 20 kHz.
Recommended AmpliямБer is a power capability value that should be taken as a guide.
JBL continually engages in research related to product improvement. New materials, production methods, and design
reямБnements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
exceed the original design speciямБcations unless otherwise stated.
Horizontal 1/3 Octave Polars
снд SP215-9 2 way System
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS SP215-9
CRP 15M
1/98
A Harman International Company
|
Ingersoll Rand Home Theater Server 6744X User Manual
Invacare Mobility Aid M50TM User Manual
Jabra Wireless Office Headset GN9330e User Manual
JVC VCR HR J245EE User Manual
Kathrein TV Antenna 214125 User Manual
Kenwood Car Video System KVT 614 User Manual
Kicker Stereo Amplifier 500si User Manual
KitchenAid Convection Oven KERA205PBL1 User Manual
KitchenAid Juicer KSN1JA User Manual
Kodak Digital Camera 3200AF User Manual