JVC CRT Television AV 14ATG2 User Manual

COLOUR TELEVISION  
Contents  
AV-14A10  
AV-21D10  
AV-21DM10  
AV-21DTG2  
AV-21LT1  
AV-14ATG2  
AV-14FTG2  
AV-20NTG2  
AV-21ATG2  
Locations ................................ 2  
Preparation ............................. 3  
Basic operation ...................... 9  
AV-21LTG1  
Remote control buttons  
and functions........................10  
Using the TV’s menus ..........13  
Using the button on theTV ...16  
INSTRUCTIONS  
Troubleshooting ...................18  
Specifications.......................19  
Thank you for purchasing this JVC  
colour television.  
To ensure your complete  
understanding, please read this  
manual thoroughly before operation.  
WARNING:  
TO PREVENT FIRE OR SHOCK  
HAZARD, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR  
MOISTURE.  
CAUTION:  
• TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES  
REGARDING THE USE OF THIS TV.  
• Operate only from the power source specified on the TV.  
• Avoid damaging the power plug and power cord.  
• Avoid improper installation and never position this TV where good ventilation is  
unattainable. When installing this TV  
distance recommendations must be  
maintained between the floor and  
15 cm  
wall, as well as installment in a tightly  
enclosed area or piece of furniture.  
Adhere to the minimum distance  
10 cm  
10 cm  
15 cm  
guidelines shown for safe operation.  
• Do not allow objects or liquid into the cabinet openings.  
• In the event of a fault, unplug this TV and call a service technician. Do not  
attempt to repair it by yourself or remove the rear cover.  
• When you don’t use this TV for a long period of time, be sure to disconnect the  
power plug from the AC outlet.  
LCT0994-001B-H  
0701-Ki-NV-JMT  
2001 VICTOR COMPANY OF JAPAN, LIMITED  
 
Locations  
RM-C364GY  
RM-C360GY  
1
2
ECO  
POWER  
POWER  
SENSOR  
2
0
-
0
-
SYSTEM  
COLOUR SOUND  
PICTURE  
MODE  
SYSTEM  
PICTURE  
MODE  
COLOUR SOUND  
3
4
3
4
1
2
3
6
9
TV/VIDEO  
1
2
5
8
0
3
6
9
TV/VIDEO  
4
5
8
0
4
=
=
5
5
OFF  
OFF  
7
TIMER  
7
TIMER  
CHANNEL  
SCAN  
CHANNEL  
SCAN  
6
RETURN+  
6
RETURN+  
- --  
/
- --  
/
~
~
7
8
7
8
DISPLAY  
MUTING  
DISPLAY  
MUTING  
!
@
!
@
MENU  
MENU  
CHANNEL  
VOLUME  
CHANNEL  
VOLUME  
#
9
#
9
REMOTE CONTROL UNIT  
RM-C364GY  
REMOTE CONTROL UNIT  
RM-C360GY  
1 ECO SENSOR button  
2 SOUND SYSTEM button  
3 COLOUR SYSTEM button  
4 TV/VIDEO button  
p.11  
p.10  
p.10  
p.9  
0 POWER button  
- PICTURE MODE button  
= Number buttons  
~ -/-- button  
p.5,9  
p.10  
p.9  
p.9  
5 OFF TIMER button  
6 CHANNEL SCAN button  
7 RETURN + button  
p.11  
p.12  
p.12  
p.11  
p.9  
! MUTING button  
@ MENU buttons  
p.11  
MENU  
buttons  
/
MENU /+ buttons  
8 DISPLAY button  
# VOLUME /+ buttons  
p.9  
9 CHANNEL –/+ buttons  
2
 
Preparation  
1. Connecting the aerial and external devices  
Notes: .........................................................................................................................  
For further details, refer to the manuals provided with the devices you are connecting.  
Connecting cables are not supplied.  
The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either  
jack is output through both.You cannot provide input to both the front and rear jacks at the  
same time. Disconnect one input, or use one of the jacks as an output jack only (for  
monitoring or recording).  
The rod aerial is supplied with the AV-14A10/AV-14ATG2/AV-14FTG2.  
....................................................................................................................................  
I Connecting the aerial and VCR  
Connecting the aerial  
To install rod aerial:  
Install into the top-rear aerial holder. Once installed, it cannot be removed.  
VHF/UHF outdoor aerial  
Indoor aerial  
Rod aerial  
VIDEO  
AUDIO  
IN  
OUT  
Illustration of AV-14FTG2.  
Connecting the aerial and VCR  
VHF/UHF outdoor aerial  
2
VIDEO  
AUDIO  
IN  
OUT  
3
To video  
output  
To audio  
output  
To RF  
output  
1
VCR  
To aerial input  
Illustration of AV-14FTG2.  
3
 
Preparation  
I Connecting other external devices  
To audio  
output  
To video  
output  
VIDEO AUDIO  
VCR (for playing)  
IN  
OUT  
VCR (for recording)  
To audio  
input  
To video  
input  
Illustration of AV-21DTG2.  
To video  
output  
Camcorder  
or  
To audio  
output  
TV game  
MENU  
VIDEO AUDIO  
IN  
Headphones  
Illustration of AV-21DTG2.  
Note: ..................................................................................................................  
Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect  
the headphones, the TV speakers go off.  
...........................................................................................................................  
4
 
Preparation  
2. Connecting the power cord  
Insert the Power plug into an AC outlet.  
3. Inserting batteries into the remote control  
Correctly insert two batteries, observing the  
end first.  
and  
polarities and inserting the  
CAUTION:...........................................  
Follow the cautions printed on the  
batteries.  
............................................................  
Notes: .................................................  
Use AA/R6/UM-3 dry cell batteries.  
If the remote control does not work  
properly, fit new batteries.  
The supplied batteries are for testing, not  
regular use.  
............................................................  
4.Turning your TV on  
1. Press the Main power button on the TV to turn the TV’s main power  
on.  
The POWER lamp or POWER/ON TIMER lamp lights.  
If image does not appear:  
Your TV is in the standby mode. Press the POWER button on the remote control  
to turn your TV on.  
You can also turn on your TV by pressing the CHANNEL /+ button on your TV.  
To turn your TV off:  
Press the POWER button on the remote control.Your TV enters the standby  
mode.  
To turn the TV’s main power off:  
Press the Main power button on the TV.  
5
 
Preparation  
5. Selecting the on-screen language  
You can select the language for the on-screen display.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
3
1. Press MENU  
to display the MENU 3 menu,  
then select LANGUAGE.  
/
LANGUAGE  
ENGLISH  
2. Press MENU /+ to select language.  
The on-screen displays indications are in the selected  
language.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
6. Presetting TV stations  
To view a TV programme, you must first preset TV channels to channels on the TV.  
This TV has 100 channels (channel 1 to 99 and channel AV).  
I Auto Channel Preset  
You can automatically preset all TV channels that can be received by your TV to  
channels.  
The Auto Channel Preset function does not preset a TV channel to the AV channel  
(channel number 0).  
If the TV cannot preset the TV channel you want to view, preset it manually. For details see  
Manual Channel Preseton page 7.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
3
1. Press MENU  
to display the MENU 3 menu,  
then select AUTO CH PRESET.  
/
LANGUAGE  
ENGLISH  
2. Press MENU /+ to start the Auto Channel  
Preset function.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
ON SEARCH is displayed on the screen.  
When you have finished presetting all TV channels that can be received on your  
TV, the display will go out and the Auto Channel Preset function will end.  
To stop the Auto Channel Preset, press the MENU /+ button.  
6
 
Preparation  
I Manual Channel Preset  
You can manually preset the desired TV channels to the desired channels.  
1. Press MENU  
to display the MENU 3 menu,  
then select MANUAL CH PRESET.  
/
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
3
LANGUAGE  
ENGLISH  
2. Press MENU /+.  
The sub-menu is displayed.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
The channel No. is displayed as a PR No.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
3. Press MENU /+ to select the channel  
NO  
B/G  
number.  
Channel  
No.  
SELECT BY  
PROGRAM BY -+  
SEARCH BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
4. Press VOLUME /+ to start searching for  
the TV channel.  
or  
is displayed on the screen.  
When a TV channel is received, the  
or  
display goes out, and the TV  
station is preset to the currently selected channel No.  
If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the  
TV channel you want to preset.  
To stop the Manual Channel Preset function, press any button other than the VOLUME  
/+ button.  
If the picture is not clear:  
Use the Fine function to fine-tune the TV station.  
1. Press MENU  
to select FINE.  
/
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
B/G  
2. Hold VOLUME /+ down to fine-tune the TV station  
so that the best image is displayed on screen.  
or indicates that the TV station is being  
fine-tuned.  
SELECT BY  
PROGRAM BY -+  
FINE  
PR 3 VL  
EXIT BY  
BY VOL-+ DISPLAY  
5. Press MENU  
to select SOUND SYSTEM.  
/
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
6. Press VOLUME /+ to select the appropriate  
SELECT BY  
PROGRAM BY -+  
CHANGE BY VOL-+ DISPLAY  
PR 3 VL  
EXIT BY  
sound system.  
For the sound systems in each country or region, refer to the  
table Broadcasting systems.  
7. Press MENU  
to select MANUAL.  
/
8. Repeat steps 3 to 7 if you want to preset another TV station to a  
channel.  
9. Press DISPLAY to turn the display off.  
7
 
Preparation  
I Skip  
You can set undesired channels to be skipped.  
Channels set to be skipped cannot be selected by the CHANNEL /+ buttons nor  
the CHANNEL SCAN button.  
Channels to which a station has not been preset are automatically set to be skipped.  
1. Press MENU  
PRESET.  
to select MANUAL CH  
/
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
3
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2. Press MENU /+.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
The sub-menu is displayed.  
NO  
B/G  
SELECT BY  
PROGRAM BY -+  
PR 1 VL  
EXIT BY  
SEARCH BY VOL-+ DISPLAY  
3. Press MENU  
to select SKIP.  
/
MANUAL  
FINE  
SKIP  
The channel No. is displayed as a PR No.  
NO  
SOUND SYSTEM  
EXIT  
B/G  
Channel  
No.  
SELECT BY  
PROGRAM BY -+  
YES/NO BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
4. Press MENU /+ to select the channel  
you want to skip.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
5. Press VOLUME /+ to select YES.  
YES  
B/G  
The channel you selected is set to be skipped.  
To cancel the Skip:  
select NO.  
SELECT BY  
PROGRAM BY -+  
YES/NO BY VOL-+ DISPLAY  
PR 5 VL  
EXIT BY  
6. Repeat steps 4 and 5 if you want to set another channel to skip.  
7. Press DISPLAY to turn the display off.  
8
 
Basic operation  
2. Select a channel.  
I Press the CHANNEL /+  
button.  
ECO  
POWER  
SENSOR  
Up/down selection cannot be selected  
for channels to which the Skip has  
been set to YES. (See page 8.)  
SYSTEM  
PICTURE  
MODE  
COLOUR SOUND  
1
2
5
8
0
3
6
9
TV/VIDEO  
I Press the Number buttons  
to enter the channel  
number.  
If you want to enter a two-digit  
number, press the -/-- button to select  
the two digit mode --, then enter the  
channel number.  
4
OFF  
7
TIMER  
CHANNEL  
SCAN  
RETURN+  
- --  
/
DISPLAY  
MUTING  
MENU  
If the colour is abnormal:  
Repeatedly press the COLOUR  
SYSTEM button to select the  
appropriate colour system. For  
details, see Colour Systemon  
page 10.  
CHANNEL  
VOLUME  
REMOTE CONTROL UNIT  
RM-C364GY  
3. Press VOLUME /+ to adjust  
the sound.  
If the sound is abnormal:  
Repeatedly press the SOUND  
SYSTEM button to select the  
appropriate sound system. For  
details, see Sound Systemon  
page 10.  
1. Press the POWER button to  
turn your TV on.  
4. To turn your TV off, press  
POWER.  
If your TV does not turn on, press the  
Main power button on the TV then  
press the POWER button again.  
You can also turn on your TV by  
pressing any of the following buttons;  
the CHANNEL /+ button  
We recommend that you press the  
Main power button on the TV to turn  
the main power off if you do not plan  
to use your TV for a long time or if you  
wish to save energy.  
the Number buttons  
the TV/VIDEO button  
Viewing Images from an  
External Device:  
Press the TV/VIDEO button to  
select the VIDEO mode.  
You can also use the Input function to  
select the VIDEO mode. For details,  
refer to page 13.  
9
 
Remote control buttons and functions  
Colour System  
Sound System  
If the colour is abnormal, select the  
appropriate colour system. Each press  
of the COLOUR SYSTEM button  
If the sound is abnormal, select the  
appropriate sound system. Each press  
of the SOUND SYSTEM button  
changes the colour system as follows.  
changes the sound system as follows.  
In TV mode (channel 1 to 99 and  
AV):  
<AV-21DM10>  
B/G  
I
D/K  
M
<AV-21DM10>  
SECAM  
NTSC3.58  
AUTO  
PAL  
<Others models>  
NTSC4.43  
B/G  
I
D/K  
<Others models>  
For the sound systems in each country or  
region, see the table Broadcasting  
Systemson page 19.  
SECAM  
AUTO  
PAL  
You cannot select any sound system  
when in VIDEO mode.  
In VIDEO mode:  
SECAM  
AUTO  
PAL  
Picture Mode  
NTSC4.43  
NTSC3.58  
You can select one of three picture  
adjustment modes.  
Repeatedly press the PICTURE  
MODE button to select the desired  
mode.  
AUTO:  
Automatic colour system selection.  
For the colour systems in each country or  
region, see the table Broadcasting  
Systemson page 19.  
If the colour is abnormal even though you  
selected AUTO, change the appropriate  
colour system manually.  
BRIGHT:  
Heightens contrast and sharpness.  
STANDARD:  
Standardizes picture adjustments.  
SOFT:  
Softens contrast and sharpness.  
Pressing the PICTURE MODE button  
returns all the picture settings in the  
MENU 4 menu to their default settings.  
10  
 
Remote control buttons and functions  
Display  
Eco Sensor  
You can continuously display the  
current channel number or VIDEO  
mode on the screen.  
<AV-14A10/AV-14ATG2 does not have  
this function.>  
Press the DISPLAY button.  
To turn the display off, press the  
DISPLAY button again.  
You can adjust this TV so that the  
screen automatically adjusts to the  
optimum contrast according to the  
brightness of your room. This function  
reduces eye strain and the power  
consumption of this TV.  
When selecting a channel or VIDEO mode  
with no input signal, indication of selected  
channel or VIDEO mode becomes fixed  
on the screen.  
Repeatedly press the ECO SENSOR  
button to select the desired mode.  
Off Timer  
AV-21LT1/AV-21LTG1 does not display  
DIGITAL.  
You can set this TV to turn off  
automatically within a specified period  
of time.  
Repeatedly press the OFF TIMER  
button to select the period of time.  
DIGITAL ECO SENSOR  
DISPLAY:  
The Eco Sensor function will work.  
In this mode, the mark indicating the  
brightness of your room is displayed  
for several seconds each time the  
brightness changes. The number of  
marks displayed on screen increases  
as your room becomes darker.  
You can set the period of time a maximum  
of 120 minutes in 10 minute increments.  
1 minute before the Off Timer turns off the  
TV, GOOD NIGHT! displays.  
To display the remaining time:  
Press the OFF TIMER button once.  
DIGITAL ECO SENSOR:  
The Eco Sensor function will work.  
However, in this mode, the mark will  
not be displayed even if the brightness  
of your room changes.  
To cancel the Off Timer:  
Press the OFF TIMER button to return  
the period of time to 0.  
The Off Timer will not turn off the TVs  
main power.  
DIGITAL ECO SENSOR OFF:  
The Eco Sensor function will not work.  
Muting  
You can turn the volume off instantly.  
This is convenient when answering the  
phone or when you have visitors.  
Press the MUTING button.  
To return the sound, press the  
MUTING button again.  
11  
 
Remote control buttons and functions  
Channel Scan  
Return +  
You can search for the channel you  
want to view while scanning all of the  
channels that can be viewed on this  
TV.  
You can set a channel you frequently  
view to the Return Channel and you  
can view that channel at any time with  
one-touch.  
To set the channel to the Return  
Channel:  
1. Press CHANNEL SCAN.  
Channels will be scanned in  
channel No. order.  
1. Select the channel you want to  
set to the Return Channel.  
2. When the channel that you  
want to view appears, press  
CHANNEL SCAN again  
before scanning for the next  
channel begins.  
2. Press RETURN + and hold until  
the message RETURN PLUS  
PROGRAMMED! appears.  
When you turn off the TV, the Return  
Channel setting is cancelled.  
Channel Scan selection cannot be  
selected for channels to which the  
Skip has been set to YES. (See page  
8.)  
To view the Return Channel:  
Press the RETURN + button.  
You can view two channels (current  
channel and Return Channel) alternately  
by pressing this button.  
To cancel the Return Channel  
setting:  
Press the RETURN + button and hold  
until the message RETURN PLUS  
CANCELLED! appears.  
If no channel is set to the Return  
Channel:  
You can view the channel selected  
right before the current channel by  
pressing this button.  
12  
 
Using the TVs menus  
When the time set for the On  
On Timer  
Timer function is reached:  
The TV automatically turns on and the  
channel set for the On Timer function  
is displayed.  
Your TV will automatically turn on and  
tune into the channel you set after the  
period of time you set.  
For safety reasons the TV will  
automatically turn off if no operations are  
made within approximately two hours after  
the TV is turned on with the On Timer  
function.  
1. Press MENU  
to display  
the MENU 1 menu, then  
/
select ON TIMER.  
The Off Timer function and Auto Shutoff  
function have priority over the On Timer  
function.  
MENU  
1
TV  
INPUT  
ON TIMER  
VNR  
Channel  
No.  
PR 1 0:00  
OFF  
PROGRAM BY -+  
SELECT BY  
OPERATE BY VOL-+ DISPLAY  
Input  
EXIT BY  
You can view images from VCRs or  
other devices connected to your TV.  
2. Press MENU /+ to select a  
channel you want to view  
when the TV turns on.  
1. Press MENU  
to display  
the MENU 1 menu, then  
select INPUT.  
/
3. Press VOLUME /+ to select  
the period of time after which  
you want to turn on the TV.  
The On Timer function starts.  
MENU  
1
INPUT  
TV  
ON TIMER  
VNR  
PR 1 0:00  
OFF  
Each time you press the button, the  
period of time changes in 15 minute  
intervals (up to 12 hours).  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
To cancel the On Timer function,  
press the VOLUME /+ button to  
set the period of time to 0:00.  
2. Press MENU /+ to select the  
VIDEO mode.  
TV mode changes to VIDEO mode.  
4. Press DISPLAY to turn the  
display off.  
If you turn off the TVs main power by  
pressing the Main power button, the  
On Timer function is canceled.  
If you do not turn off the TV after  
starting the On Timer function, the  
channel will automatically switch to  
the channel set for the On Timer  
function.  
13  
 
Using the TVs menus  
2. Press MENU /+ to select ON.  
To cancel the Child Lock function,  
select OFF.  
VNR (Video Noise Reduction)  
You can reduce the picture noise.  
3. Press DISPLAY to turn the  
display off.  
1. Press MENU  
to display  
the MENU 1 menu, then  
select VNR.  
/
The Child Lock function is canceled  
when you turn the TVs main power  
off.  
MENU  
1
TV  
INPUT  
ON TIMER  
VNR  
PR 1 0:00  
OFF  
Auto Shutoff  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
You can set your TV to turn off if no  
signals are received for about 15  
minutes or longer after the end of a  
broadcast.  
2. Press MENU /+ to select ON.  
To cancel the VNR function, select  
OFF.  
1. Press MENU  
to display  
/
the MENU 2 menu, then  
select AUTO SHUTOFF.  
3. Press DISPLAY to turn the  
display off.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
ON  
Child Lock  
You can disable the front control  
buttons of the TV.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
When this function is set to ON, the TV  
can be operated using only the remote  
control.  
Use this function to prevent children  
from operating the TV at their own  
discretion (without parental consent).  
2. Press MENU /+ to select ON.  
To cancel the Auto Shutoff function,  
select OFF.  
3. Press DISPLAY to turn the  
display off.  
1. Press MENU  
to display  
the MENU 2 menu, then  
select CHILD LOCK.  
/
The Auto Shutoff function does not  
turn off the TVs main power.  
The Auto Shutoff function will not work  
for a VIDEO mode.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
14  
 
Using the TVs menus  
Blue Back  
Picture Adjustment  
You can mute the sound and change  
the picture into a blue screen while no  
signals are received by the TV, or  
when the signals are unstable.  
You can adjust the picture as you like.  
1. Press MENU  
repeatedly  
/
to display the MENU 4.  
MENU  
4
1. Press MENU  
to display  
the MENU 2 menu, then  
select BLUE BACK.  
/
TINT  
COLOUR  
BRIGHT  
CONT.  
SHARP  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
OFF  
2. Press MENU  
to select an  
item and press MENU /+ to  
/
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
adjust it.  
Item  
TINT  
+
2. Press MENU /+ to select ON.  
To cancel the Blue Back function,  
select OFF.  
Reddish  
Lighter  
Darker  
Lower  
Softer  
Greenish  
Deeper  
Brighter  
Higher  
COLOUR  
BRIGHT  
CONT.  
SHARP  
To view a broadcast even when the  
reception signal is poor, set the Blue  
Back function to OFF.  
Even when the Blue Back function is  
set to OFF, the sound may not be  
audible.  
Sharper  
TINT (tint) is displayed only when  
viewing images from NTSC3.58 or  
NTSC4.43 colour systems.  
3. Press DISPLAY to turn the  
display off.  
3. Press DISPLAY to turn the  
display off.  
15  
 
Using the button on the TV  
<AV-21D10/AV-21DM10/AV-21DTG2/AV-21LT1/AV-21LTG1>  
ON  
TIMER POWER  
MENU  
CHANNEL  
VOLUME  
EXIT  
3
4
7
2
5
1
<AV-21ATG2>  
MENU  
CHANNEL  
VOLUME  
EXIT  
ON TIMER POWER  
1
2
3
4 5  
7
<AV-14FTG2/AV-20NTG2>  
MENU  
CHANNEL  
VOLUME  
EXIT  
ON TIMER POWER  
3
2
4
5
7
1
<AV-14A10/AV-14ATG2>  
MENU  
CHANNEL  
VOLUME  
+
+
POWER/  
ON TIMER  
EXIT  
+
1
2
3
6
7
1 MENU buttons  
MENU button  
MENU /+ buttons  
5 POWER lamp  
When the Main power is on,  
the light is red.  
2 CHANNEL /+ buttons  
3 VOLUME /+ buttons  
4 ON TIMER lamp  
6 POWER/ON TIMER lamp  
When the Main power is on,  
the light is green.  
The light is switched on while  
On Timer function is operating.  
When On Timer function is on,  
it is red.  
7 Main power button  
16  
 
Using the button on the TV  
Basic operation  
Operating menus  
Check to make sure the Child Lock  
function is set to OFF. When the Child  
Lock function is set to ON, the TV cannot  
be operated using the front control  
buttons. For details, see Child Lockon  
page 14.  
You can operate functions in menus  
using the front control buttons on the  
TV.  
1. Press MENU to display a  
menu.  
1. Press CHANNEL /+ to turn  
the TV on from standby  
mode.  
2. Press MENU repeatedly to  
display the menu you want to  
use.  
2. Press CHANNEL /+ to select  
3. Press MENU to select the  
desired function or item.  
a channel.  
3. Press VOLUME /+ to adjust  
4. Press MENU /+ or VOLUME  
/+ to carry out the desired  
the volume.  
4. To turn your TV off, press the  
Main power button to turn off  
the TV's main power.  
operation.  
For details, see the description for  
each function.  
5. Press VOLUME /+ to turn the  
menu display off.  
To turn the sub-menu display  
off:  
1. Press MENU  
to select EXIT.  
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
SELECT BY  
PROGRAM BY -+  
PR 1 VL  
EXIT BY  
EXIT  
BY VOL-+ DISPLAY  
2. Press VOLUME /+ to turn the  
display off.  
17  
 
Troubleshooting  
Important: Review all the instructions in this manual.  
Problem  
Check/Action  
Cannot turn TV on  
Press the Main power button (see p.5).  
Insert the power plug in an AC outlet.  
No picture nor sound  
Press the TV/VIDEO button to select the correct mode (see p.9).  
Check the aerial connections.  
Remote control inoperable Replace the batteries (see p.5).  
Insert the batteries correctly.  
Buttons on front of TV do  
not work  
Is the Child Lock function ON ? (see p.14).  
The TV turns on suddenly The TV will automatically turn on when the On Timer is  
operated (see p.13).  
The TV turns off suddenly The TV will automatically turn off in the following cases.  
When the Off Timer or Auto Shutoff is operated (see p.11  
and p.14).  
When no operations are made within approximately two hours  
after the TV was turned on with the On Timer (see p.13).  
Abnormal sound  
Abnormal colour  
Select the appropriate sound system (see p.10).  
Adjust the colour and brightness (see p.15).  
Select the appropriate colour system (see p.10).  
Set the Picture mode to STANDARD (see p.10).  
Lines or streaks in picture  
(interference)  
Move the components apart until the interference disappears.  
Reposition the aerial.  
Spotted picture (crosstalk) Move the aerial away from the source of interference.  
Replace the aerial cable with a coaxial cable, which is less  
prone to interference.  
Double picture (ghost)  
Reposition the aerial.  
Replace with an aerial with good directionality.  
Snowy picture  
(image noise)  
Check the aerial connection and aim it correctly.  
Replace or repair the aerial.  
The TV channel changes  
suddenly  
The channel will automatically be changed when the On Timer  
operates (see p.13).  
The screen turns blue  
Is the Blue Back set to ON ? (see p.15).  
The following are normal occurrences and are not the result of TV  
malfunctions:  
When a still bright image (of a white dress, for example) appears on the screen, the image  
may be coloured. This problem occurs in all CRTs, and when the bright image disappears,  
the colouration also disappears.  
This TV is equipped with a microcomputer that may operate abnormally due to interference  
from external devices. If this happens, press the Main power button to turn the main power  
off and disconnect the power plug from the AC outlet. Then, reconnect the power plug to the  
AC outlet and press the Main power button again.  
18  
 
Specifications  
TV RF systems  
AV-21DM10:  
B, G, I, D, K, K1, M  
Others models: B, G, I, D, K, K1  
Colour systems  
AV-21DM10:  
PAL, SECAM, NTSC3.58/4.43MHz  
Others models: PAL, SECAM, NTSC3.58/4.43MHz (in VIDEO  
mode only)  
Channel and frequencies VHF low channel (VL)  
VHF high channel (VH) = 175.25 to 463.25 MHz  
UHF channel (U) = 471.25 to 863.25 MHz  
= 46.25 to 168.25 MHz  
I Receives cable channels in mid band (X to Z, S1 to S10),  
super band (S11 to S20) and hyper band (S21 to S41) .  
External input / output  
VIDEO input (RCA)  
AUDIO input (RCA)  
VIDEO output (RCA)  
AUDIO output (RCA)  
Headphone jack: mini jack (dia. 3.5 mm)  
Design and specifications subject to change without notice.  
Broadcasting Systems  
System  
Area  
Country or Region  
Sound  
Colour  
Bahrain, Kuwait, Oman, Qatar,  
United Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore,  
Thailand, India, etc.  
PAL  
B/G  
Asia,  
Middle  
East  
China, Vietnam, etc.  
PAL  
PAL  
D/K  
I
Hong Kong, etc.  
Islamic Republic of Iran, Lebanon,  
Saudi Arabia, etc.  
SECAM  
B/G  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
NTSC  
SECAM  
PAL  
M
D/K  
D/K  
B/G  
I
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
PAL  
PAL  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
PAL  
B/G  
I
Oceania  
Africa  
PAL  
PAL  
B/G  
B/G  
Egypt, Morocco, etc.  
SECAM  
19  
 

Infinity GPS Receiver GPS MIC 1 User Manual
Infinity Speaker System QPS1 User Manual
Invacare Mobility Aid 1110266 User Manual
Invacare Motor Scooter LX 3 User Manual
IOGear Mouse 1600DPI User Manual
iSimple Automobile Accessories ISTY651 User Manual
Jensen Car Video System VM9411 User Manual
JVC CD Player KD DB711 User Manual
Kenwood Car Video System DDX418 User Manual
Kettler High Chair 4883 User Manual