JVC CRT Television AV 14F43 AV 20N43 AV 21D43 User Manual

Contents  
Safety precautions  
Preparation  
2
3
3
3
4
6
6
7
COLOUR TELEVISION  
......  
1 Confirm which remote control you have  
INSTRUCTIONS  
...................................  
2 Inserting the batteries  
...  
3
Connecting the aerial and external devices  
Thank you for buying this JVC  
colour television.  
........................  
4 Connecting the power cord  
..............................................  
5 SETUP TOUR  
To make sure you understand how to  
use your new TV, please read this  
manual thoroughly before you begin.  
Basic operation  
Remote control buttons and functions 8  
.....................................  
ECO SENSOR button  
8
8
8
8
9
9
9
9
9
10  
10  
11  
11  
12  
12  
13  
13  
13  
13  
14  
14  
14  
15  
16  
16  
17  
19  
20  
.................................  
PICTURE MODE button  
COLOUR SYSTEM button  
SOUND SYSTEM button  
.............................  
...............................  
.............................................  
AV-14F43  
AV-20N43  
AV-21D43  
DISPLAY button  
..........................................  
RETURN + button  
CHANNEL SCAN button  
................................  
.............................................  
MUTING button  
OFF TIMER button  
I/II button  
.........................................  
.....................................................  
.........................  
PICTURE BOOSTER button  
Using the TV’s menus  
........................................  
Basic operation  
.....................................................  
ON TIMER  
...........................................................  
INPUT  
..........................................  
AUTO SHUTOFF  
.................................................  
..................................................  
CHILD LOCK  
BLUE BACK  
..........................................  
...............................................  
..................................................  
AI ECO DISPLAY  
SETUP TOUR  
LANGUAGE  
.......................................  
AUTO CH PRESET  
MANUAL CH PRESET  
..................................  
..............................................................  
SKIP  
................................  
Picture Adjustments  
Using the buttons on the TV  
Troubleshooting  
Specifications  
LCT1209-001A-H  
0802-NIC-JET  
© 2002 VICTOR COMPANY OF JAPAN, LIMITED  
 
Preparation  
1 Confirm which remote control you have  
Your TV comes with one of the three remote controls shown below. Functions you can  
operate differ depending on the type of remote control.  
RM-C368GY  
ECO  
PICTURE  
POWER  
SENSOR BOOSTER  
SYSTEM  
COLOUR SOUND  
PICTURE  
MODE  
1
2
3
6
9
TV/VIDEO  
I/II  
4
5
8
0
OFF  
7
TIMER  
CHANNEL  
SCAN  
RETURN+  
- --  
/
DISPLAY  
MUTING  
MENU  
CHANNEL  
VOLUME  
REMOTE CONTROL UNIT  
RM-C368GY  
2 Inserting the batteries  
Correctly insert two batteries, observing the , and  
. polarities and inserting the . end first.  
CAUTION:  
Follow the cautions printed on the batteries.  
Notes:  
Use AA/R6/UM-3 dry cell batteries.  
If the remote control does not work properly, fit new  
batteries.  
The supplied batteries are for testing, not regular use.  
3
 
Preparation  
3 Connecting the aerial and external devices  
For further details, refer to the manuals provided with the devices you are connecting.  
Connecting cables are not supplied.  
The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack  
is output through both. You cannot provide input to both the front and rear jacks at the same  
time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or  
recording).  
The rod aerial is supplied with the AV-14F43.  
I Connecting the aerial and VCR  
Connecting the aerial  
To install rod aerial:  
Install into the top-rear aerial holder. Once installed, it cannot be removed.  
VHF/UHF outdoor aerial  
Indoor aerial  
Rod aerial  
VIDEO  
AUDIO  
IN  
OUT  
• Illustration of AV-14F43.  
Connecting the aerial and VCR  
VHF/UHF outdoor aerial  
2
VIDEO  
AUDIO  
IN  
OUT  
3
To video  
output  
To audio  
output  
To RF  
output  
1
VCR  
To aerial input  
Illustration of AV-14F43.  
4
 
Preparation  
I Connecting other external devices  
To audio  
output  
To video  
output  
VIDEO AUDIO  
VCR (for playing)  
IN  
OUT  
VCR (for recording)  
To audio  
input  
To video  
input  
Illustration of AV-21D43.  
To video  
output  
Camcorder  
or  
To audio  
output  
TV game  
Illustration of AV-21D43.  
MENU  
VIDEO AUDIO  
IN  
Headphones  
Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the  
headphones, the TV speakers go off.  
5
 
Preparation  
4 Connecting the power cord  
Connect the power cord to the AC outlet.  
Operate only from the power source indicated on the rear of the TV.  
5 SETUP TOUR  
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is  
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.  
In case of resetting that the reason for such as removal, you can set the SETUP TOUR  
function on the MENU 3menu. For details, see page 14.  
1 Press the Main power button  
on the TV.  
The POWER lamp or POWER/ON  
TIMER lamp lights. After the JVC  
logo has been displayed, the TV  
automatically switches to the  
POWER lamp Main power button  
language setting mode.  
CHANNEL  
SCAN  
RETURN+  
- --  
/
0
DISPLAY  
MUTING  
DISPLAY  
button  
SETUP TOUR  
SETUP TOUR  
MENU  
/
MENU  
MENU /+  
buttons  
buttons  
CHANNEL  
VOLUME  
LANGUAGE  
ENGLISH  
NEXT  
EXIT BY  
DISPLAY  
OPERATE BY -+  
2 Press the MENU M buttons to select the on-screen language.  
3 Press the MENU y button.  
The AUTO PROGRAMMING function will start and the indicator blinks.  
SETUP TOUR  
NOW PROGRAMMING  
STOP BY -+  
To stop the AUTO PROGRAMMING function, press the MENU m buttons.  
When all the TV channels that can be received on your TV have been preset, the  
display goes out and the AUTO PROGRAMMING function operation is completed.  
If a TV channel you want to view is not set to the channel, set it with the MANUAL CH  
PRESET function. For details, see page 15.  
6
 
Basic operation  
The illustration below is for the remote  
control RM-C368GY. Your remote control may  
not look exactly like the illustrations.  
1 Press the POWER button to turn  
your TV on.  
If your TV does not turn on, press the  
Main power button on the TV then press  
the POWER button again.  
You can also turn on your TV by pressing  
any of the following buttons;  
ECO  
PICTURE  
POWER  
SENSOR BOOSTER  
- the CHANNEL m button  
- the Number buttons  
SYSTEM  
COLOUR SOUND  
PICTURE  
MODE  
1
2
3
6
9
- the TV/VIDEO button  
TV/VIDEO  
I/II  
4
5
8
0
2 Select a channel.  
OFF  
I Press the CHANNEL m button.  
7
TIMER  
Up/down selection cannot be selected  
for channels to which the SKIP has been  
set to YES. See page 16.  
CHANNEL  
SCAN  
RETURN+  
- --  
/
DISPLAY  
MUTING  
I Press the Number buttons to enter  
the channel number.  
MENU  
If you want to enter a two-digit number,  
press the -/-- button to select the two  
digit mode --, then enter the channel  
number.  
CHANNEL  
VOLUME  
REMOTE CONTROL UNIT  
RM-C368GY  
3 Press the VOLUME M button to  
adjust the sound.  
4 To turn your TV off, press the  
POWER button.  
We recommend that you press the Main  
power button on the TV to turn the main  
power off if you do not plan to use your  
TV for a long time or if you wish to save  
energy.  
If the picture is not clear:  
Press the COLOUR SYSTEM button to  
select another colour system, see page 8.  
If the sound is not clear:  
Press the SOUND SYSTEM button to select  
another sound system, see page 8.  
Viewing Images from an External  
Device:  
Press the TV/VIDEO button to select the  
VIDEO mode.  
You can also use the INPUT function to select  
the VIDEO mode. For details, refer to page 12.  
7
 
Remote control buttons and functions  
ECO SENSOR button  
COLOUR SYSTEM button  
You can adjust this TV so that the screen  
automatically adjusts to the optimum  
contrast according to the brightness of  
your room. This function reduces eye  
strain and the power consumption of this  
TV.  
If the picture is not clear or no colour  
appears, change the current colour system  
to another colour system.  
Press this button to select the colour  
system.  
Press this button to select the desired  
mode.  
In TV mode (channel 1 to 99 and AV):  
SECAM  
AUTO  
PAL  
AI ECO SENSOR 1:  
The AI ECO SENSOR function switches  
on.  
Usually, it is recommended to watch the  
TV in this mode.  
In VIDEO mode:  
SECAM  
AUTO  
PAL  
NTSC4.43  
NTSC3.58  
AUTO:  
AI ECO SENSOR 2:  
The AI ECO SENSOR function switches  
on.  
If you feel the screen in the AI ECO  
SENSOR 1mode is too dark, select this  
mode.  
Automatic colour system selection.  
For the colour systems in each country or  
region, see the tableBroadcasting systems”  
on page 20.  
If the picture is not normal in the AUTO  
mode, change the AUTO mode to another  
colour system.  
AI ECO SENSOR OFF:  
The AI ECO SENSOR function switches  
off.  
You can display on the screen the effect of the  
AI ECO SENSOR function.  
SOUND SYSTEM button  
If the sound is not clear even when the  
picture appears normal, change the  
current sound system to another sound  
system.  
For details, see AI ECO DISPLAYon page 13.  
PICTURE MODE button  
You can select one of three picture  
adjustment settings as you like.  
Press this button to select the sound  
system.  
Press this button to select a mode.  
B/G  
I
D/K  
BRIGHT:  
For the sound systems in each country or  
region, see the table Broadcasting systems”  
on page 20.  
Heightens contrast and sharpness.  
STANDARD:  
Standardizes picture adjustments.  
You cannot select any sound system when in  
a VIDEO mode.  
SOFT:  
Softens contrast and sharpness.  
Pressing this button returns all the picture  
settings in the MENU 4to their default  
settings.  
8
 
Remote control buttons and functions  
DISPLAY button  
CHANNEL SCAN button  
You can continuously display the current  
channel number or VIDEO mode on the  
screen.  
You can quickly view all TV channels  
programmes that you can view on your  
TV, and search for the programme you  
want to view.  
Press this button.  
To turn the display off, press this button  
again.  
1 Press this button to start scanning  
TV channels.  
The TV channel programmes are each  
displayed for several seconds.  
The programmes of TV channels for which  
the SKIP function is set to YESare not  
displayed. (See page 16.)  
When selecting a channel or VIDEO mode  
with no input signal, indication of selected  
channel or VIDEO mode becomes fixed on the  
screen.  
RETURN + button  
You can set a channel you frequently view  
to the Return Channel and you can view  
that channel at any time with one-touch.  
2 When you find the programme you  
want to view, press this button  
again to stop scanning.  
To set the channel to the Return  
Channel:  
MUTING button  
You can turn the sound off instantly.  
Press this button.  
1 Select the channel you want to set  
to the Return Channel.  
To turn the sound on, press this button  
again.  
2 Press this button and hold until the  
message RETURN PLUS  
PROGRAMMED!appears.  
OFF TIMER button  
When you turn off the TV, the Return  
Channel setting is cancelled.  
You can set the TV to automatically turn  
off after a set time.  
Press this button to select the period of  
time.  
To view the Return Channel:  
Press this button.  
You can view two channels (current channel  
and Return Channel) alternately by pressing  
this button.  
You can set the period of time to a maximum  
of 120 minutes in 10 minute increments.  
1 minute before the OFF TIMER function  
turns off the TV, GOOD NIGHT!appears.  
To cancel the Return Channel setting:  
Press this button and hold until the  
messageRETURN PLUS CANCELLED!”  
appears.  
To display the remaining time, press this  
button once.  
To cancel the OFF TIMER function, press  
this button to set the period of time to 0.  
If no channel is set to the Return  
Channel:  
You can view the channel selected right  
before the current channel by pressing  
this button.  
The OFF TIMER function will not turn off the  
TVs main power.  
9
 
Remote control buttons and functions  
I/II button  
PICTURE BOOSTER button  
You can select one of the two bilingual  
sounds in an A2 stereo programmes  
bilingual programme.Press the A2  
Bilingual button to select a bilingual  
sound.  
When the picture is unclear because the  
reception level of the TV signal is low,  
activating the Picture Booster improves  
the picture clarity in some situations.  
Repeatedly press the PICTURE BOOSTER  
button to select the desired mode.  
I: Bilingual I  
II: Bilingual II  
HIGH:  
The Picture Booster is functioning at  
maximum.  
LOW:  
The A2 Bilingual function has no effect on  
stereo programmes of the A2 stereo broadcast  
programme type, although an A2 Bilingual  
function indicator will appear on the screen.  
The A2 Bilingual function has no effect on  
programmes other than A2 stereo broadcast  
programme types, although an A2 Bilingual  
function indicator will appear on the screen.  
The A2 Bilingual function has no effect in  
Video mode, although an A2 Bilingual  
The Picture Booster is functioning at  
minimum.  
OFF:  
The Picture Booster is off.  
If the picture becomes abnormal when you  
set the Picture Booster to HIGH, then set it to  
LOW or OFF.  
function indicator will appear on the screen.  
10  
 
Using the TVs menus  
This TV has a number of functions you can operate using the menus. To use all your TVs  
functions fully, you need to understand how to use the menus.  
2 Repeatedly press the MENU T  
buttons to display a desired  
CHANNEL  
RETURN+  
- --  
/
0
SCAN  
menu.  
DISPLAY  
MUTING  
DISPLAY  
button  
If you hold down the y button, the next  
menu is displayed.  
MENU  
/
MENU  
MENU /+  
buttons  
buttons  
If the selected function is on the first line,  
pressing the r button displays the  
preceding menu.  
CHANNEL  
VOLUME  
3 Repeatedly press the MENU T  
buttons to select a desired  
function.  
I Basic operation  
4 Press the MENU M buttons to  
change function settings.  
1 Press the MENU T buttons.  
Example:  
One of the 4 menus is displayed.  
Changes the AUTO  
SHUTOFF setting.  
MENU number  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
OFF  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
ON  
MENU  
1
INPUT  
ON TIMER  
TV  
The icon  
on  
the left indicates  
the currently  
selected function.  
AI ECO DISPLAY  
ON  
AI ECO DISPLAY  
ON  
PR 1 0:00  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
EXIT BY  
DISPLAY  
OPERATE BY -+  
With some functions, the operation  
method may differ.  
5 Press the DISPLAY button to turn  
the display off.  
To operate a menu using the buttons on  
the front panel of the TV, refer to  
Operating menuson page 18.  
11  
 
Using the TVs menus  
When the time set for the ON TIMER  
function is reached:  
ON TIMER  
Your TV will automatically turn on and  
tune into the channel you set after the  
period of time you set.  
The TV automatically turns on and the  
channel set for the ON TIMER function is  
displayed.  
1 Press MENU T to display the  
MENU 1menu, then select  
ON TIMER.  
For safety reasons the TV will automatically  
turn off if no operations are made within  
approximately two hours after the TV is  
turned on with the ON TIMER function.  
MENU  
1
TV  
The OFF TIMER function and AUTO  
SHUTOFF function have priority over the ON  
TIMER function.  
INPUT  
ON TIMER  
Channel  
No.  
PR 1 0:00  
OPERATE BY VOL-+  
SELECT BY  
PROGRAM BY -+  
EXIT BY  
DISPLAY  
INPUT  
You can view images from VCRs or other  
devices connected to your TV.  
2 Press MENU M to select a channel  
you want to view when the TV turns  
on.  
1 Press MENU T to display the  
MENU 1menu, then select  
INPUT.  
3 Press VOLUME M to select the  
period of time after which you want  
to turn on the TV.  
MENU  
1
INPUT  
TV  
ON TIMER  
PR 1 0:00  
The ON TIMER function starts.  
Each time you press the button, the period  
of time changes in 15 minute intervals (up  
to 12 hours).  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
To cancel the ON TIMER function,  
press the VOLUME m button to set the  
period of time to 0:00.  
2 Press MENU M to select the VIDEO  
mode.  
TV mode changes to VIDEO mode.  
4 Press DISPLAY to turn the display  
off.  
If you turn off the TVs main power by  
pressing the Main power button, the ON  
TIMER function is canceled.  
If you do not turn off the TV after starting  
the ON TIMER function, the channel will  
automatically switch to the channel set for  
the ON TIMER function.  
12  
 
Using the TVs menus  
AUTO SHUTOFF  
BLUE BACK  
You can set your TV to turn off if no  
signals are received for about 15 minutes  
or longer after the end of a broadcast.  
You can mute the sound and change the  
picture into a blue screen while no signals  
are received by the TV, or when the  
signals are unstable.  
1 Press MENU T to display the  
MENU 2menu, then select AUTO  
SHUTOFF.  
1 Press MENU T to display the  
MENU 2menu, then select BLUE  
BACK.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
AI ECO DISPLAY  
ON  
AI ECO DISPLAY  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M to select ON.  
2 Press MENU M to select ON.  
To cancel the AUTO SHUTOFF function,  
select OFF.  
The AUTO SHUTOFF function does not  
turn off the TVs main power.  
To cancel the BLUE BACK function,  
select OFF.  
To view a broadcast even when the  
reception signal is poor, set the BLUE  
BACK function to OFF.  
The AUTO SHUTOFF will not work for a  
VIDEO mode.  
Even when the BLUE BACK function is set  
to OFF, the sound may not be audible.  
CHILD LOCK  
You can disable the front control buttons  
of the TV.  
When this function is set to ON, the TV  
can be operated using only the remote  
control.  
Use this function to prevent children from  
operating the TV without parental consent.  
AI ECO DISPLAY  
You can display on the screen the effect of  
the AI ECO SENSOR function.  
1 Press MENU T to display the  
MENU 2menu, then select AI  
ECO DISPLAY.  
1 Press MENU T to display the  
MENU 2menu, then select CHILD  
LOCK.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
OFF  
AI ECO DISPLAY  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
AI ECO DISPLAY  
ON  
2 Press MENU M to select ON.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
The clover mark indicating the brightness of  
your room is displayed for several seconds  
each time the brightness changes. The  
number of clover marks displayed on screen  
increases as your room becomes darker.  
To cancel the AI ECO DISPLAY  
function, select OFF.  
2 Press MENU M to select ON.  
To cancel the CHILD LOCK function,  
select OFF.  
The CHILD LOCK function is canceled when  
you turn the power off.  
To switch the AI ECO SENSORs mode, see  
the ECO SENSOR buttonon page 8.  
13  
 
Using the TVs menus  
SETUP TOUR  
AUTO CH PRESET  
You can start the SETUP TOUR function.  
You can automatically preset all TV  
channels that can be received by your TV  
to channels.  
1 Press MENU T to display the  
MENU 3menu, then select  
SETUP TOUR.  
1 Press MENU T to display the  
MENU 3menu, then select AUTO  
CH PRESET.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M.  
JVC logo is appear and the SETUP  
TOUR function will start.  
For details, see page 6.  
2 Press MENU M to start the AUTO  
CH PRESET function.  
>>>ON SEARCHis displayed on  
the screen.  
When all the TV channels that can be  
received on your TV have been preset,  
the display goes out and the AUTO CH  
PRESET function operation is  
completed.  
LANGUAGE  
You can select the language for the on-  
screen display.  
1 Press MENU T to display the  
MENU 3menu, then select  
LANGUAGE.  
To stop the AUTO CH PRESET:  
Press the MENU m buttons.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
The AUTO CH PRESET function does not  
preset a TV channel to the AV channel  
(channel number 0).  
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
If the TV cannot preset the TV channel you  
want to view, preset it manually. For details,  
see MANUAL CH PRESETon page 15.  
2 Press MENU M to select  
language.  
The on-screen display indications are  
in the selected language.  
14  
 
Using the TVs menus  
MANUAL CH PRESET  
You can manually preset desired TV  
channels to desired channels.  
If the picture is not clear:  
Fine-tune the TV channel.  
1 Press MENU T to display the  
MENU 3menu, then select  
MANUAL CH PRESET.  
1
Press MENU t to select “FINE”.  
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
SELECT BY  
PROGRAM BY -+  
FINE  
PR 3 VL  
EXIT BY  
LANGUAGE  
ENGLISH  
BY VOL-+ DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2
Hold VOLUME m down to fine-tune  
the TV channel so that the best image  
is displayed on screen.  
2 Press MENU M.  
The sub-menu is displayed.  
>or <indicates that the TV is fine-  
tuning the TV channel.  
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
If the sound is not clear:  
SELECT BY  
PROGRAM BY -+  
SEARCH BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
1
Press MENU t to select “SOUND  
SYSTEM”.  
The channel number is displayed as a PR  
number. For example, channel 1 will be  
displayed as PR 1. However, the AV  
channel will be displayed as AV.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
B/G  
SELECT BY  
PROGRAM BY -+  
CHANGE BY VOL-+ DISPLAY  
PR 3 VL  
EXIT BY  
3 Press MENU M to select the  
channel number.  
2
Press VOLUME m to select the  
appropriate sound system.  
4 Press VOLUME M to start  
searching for the TV channel.  
For the sound systems in each country  
or region, refer to the table  
Broadcasting systemson page 20.  
>>>or <<<is displayed on the  
screen.  
When the TV finds a TV channel, the  
>>>or <<<display goes out,  
and the TV channel is preset to the  
currently selected channel number.  
5 Press MENU T to select  
MANUAL.  
6 Repeat steps 3 to 5 if you want to  
preset another TV channel to a  
channel.  
If the TV channel you want to preset is not  
displayed, repeat step 4 until the TV finds  
the TV channel you want to preset.  
To stop the MANUAL CH PRESET function,  
press any button other than the VOLUME  
m button.  
15  
 
Using the TVs menus  
SKIP  
Picture Adjustments  
You can set undesired channels to be  
skipped. Channels set to be skipped  
cannot be selected by the CHANNEL m  
buttons nor the CHANNEL SCAN button.  
You can adjust the picture as you like.  
1 Press MENU T to display the  
MENU 4menu.  
Channels to which TV channels have not  
been preset are automatically set to be  
skipped.  
MENU  
4
TINT  
COLOUR  
BRIGHT  
CONT.  
SHARP  
1 Press MENU T to display the  
MENU 3menu, then select  
MANUAL CH PRESET.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU T to select an item  
and press MENU M to adjust it.  
2 Press MENU M.  
The sub-menu is displayed.  
TINT*  
- : Reddish  
- : Lighter  
- : Darker  
- : Lower  
- : Softer  
+ : Greenish  
+ : Deeper  
+ : Brighter  
+ : Higher  
+ : Sharper  
COLOUR  
BRIGHT  
CONT.  
3 Press MENU T to select SKIP.  
MANUAL  
FINE  
SHARP  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
*TINT (tint) is displayed only when  
viewing images from NTSC3.58 or  
NTSC4.43 colour systems.  
SELECT BY  
PROGRAM BY -+  
PR 3 VL  
EXIT BY  
YES/NO BY VOL-+ DISPLAY  
4 Press MENU M to select the  
channel you want to skip.  
5 Press VOLUME M to select YES.  
The channel is set to be skipped.  
To cancel the SKIP function, select  
NO.  
6 Repeat steps 4 and 5 if you want to  
set another channel to skip.  
16  
 
Using the buttons on the TV  
<AV-21D43>  
1 MENU buttons  
MENU y button  
MENU m buttons  
2 CHANNEL m buttons  
3 VOLUME m buttons  
4 AI ECO sensor  
ON  
TIMER POWER  
MENU  
CHANNEL  
VOLUME  
EXIT  
3
4
6
8
2
5
7
1
5 Remote control sensor  
6 ON TIMER lamp  
The light is switched on  
while ON TIMER function  
is operating.  
<AV-14F43/AV-20N43>  
MENU  
CHANNEL  
VOLUME  
EXIT  
ON TIMER POWER  
7 POWER lamp  
When the Main power is  
on, the light is red.  
8 Main power button  
3
2
4
5
6
7
8
1
17  
 
Using the buttons on the TV  
Basic operation  
Operating menus  
Check to make sure the CHILD LOCK  
function is set to OFF. When the CHILD  
LOCK function is set to ON, the TV cannot  
be operated using the front control buttons.  
For details, see CHILD LOCKon page 13.  
You can operate functions in menus using  
the front control buttons on the TV.  
1 Press MENU y to display a menu.  
2 Press MENU y repeatedly to display  
1 Press CHANNEL M to turn the TV  
the menu you want to use.  
on from standby mode.  
3 Press MENU y to select the desired  
2 Press CHANNEL M to select a  
function or item.  
channel.  
4 Press MENU M or VOLUME M to  
3 Press VOLUME M to adjust the  
carry out the desired operation.  
volume.  
For details, see the description for each  
function.  
4 To turn your TV off, press the Main  
power button to turn off the TVs  
main power.  
5 Press VOLUME M to turn the menu  
display off.  
To change the TV mode to the VIDEO  
mode:  
To turn the sub-menu display off:  
Select the VIDEO mode with the INPUT  
function in MENU 1.  
1
Press MENU y to select EXIT.  
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
SELECT BY  
PROGRAM BY -+  
EXIT  
PR 3 VL  
EXIT BY  
BY VOL-+ DISPLAY  
2
Press VOLUME m to turn the display  
off.  
18  
 
Troubleshooting  
If there is no picture or the TV does not operate normally, make sure the problem isnt due  
to the reasons indicated below.  
If the problem persists even after taking the measures indicated, please contact a service  
technician.  
Cannot turn the TV on  
Poor picture  
Press the Main power button on the TV.  
Connect the power cord to the AC outlet.  
Press the COLOUR SYSTEM button to select  
another colour system. (see page 8.)  
Adjust the picture settings. (see page 16.)  
Set the Picture mode to STANDARD.  
(see page 8.)  
The screen turns blue  
Is the BLUE BACK function on? (see page 13.)  
If noise (snow) totally blocks out the picture,  
check the following.  
Remote control inoperable  
- Have the TV and aerial been connected  
properly?  
Replace the batteries. (see page 3.)  
- Has the aerial cable been damaged?  
- Is the aerial pointing in the right direction?  
- Is the aerial itself faulty?  
Buttons on front of the TV do not work  
Switch the CHILD LOCK function off.  
(see page 13.)  
If the TV or aerial suffer interference from  
other equipment, stripes or noise may appear  
in the picture. Move any equipment which  
can cause interference away from the TV.  
TV does not respond immediately  
If the TV or aerial suffer interference from  
signals reflecting from mountains or  
buildings, double-pictures (ghosting) will  
occur. Change the aerials direction or replace  
it with an aerial with better directionality.  
Press the main power button on the TV to  
turn off the main power. Press the main  
power button again to turn on the TV. If the  
TV returns to a normal state, operation is  
normal.  
When a white and bright still image (such as  
a white dress) is displayed on the screen, the  
white part may look as if it is coloured. When  
the image disappears from the screen, the  
unnatural colours will also disappear.  
The TV turns off suddenly  
Is the OFF TIMER function set to operate?  
(see page 9.)  
Is the AUTO SHUTOFF function on?  
(see page 13.)  
The TV turns on suddenly  
Is the ON TIMER function set to operate?  
(see page 12.)  
Have you not performed an operation for  
about two hours after the TV was switched on  
by the ON TIMER function? (see page 12.) If  
you dont perform an operation within about  
two hours, the TV is automatically switched  
off for safety.  
The TV channel changes suddenly  
Is the ON TIMER function set to operate?  
(see page 12.)  
Poor sound  
Press the SOUND SYSTEM button to select  
another sound system. (see page 8.)  
19  
 
Specifications  
TV RF systems  
B, G, I, D, K, K1  
Colour systems  
PAL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz (in VIDEO mode only)  
Receiving channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
External input / output  
INPUT:  
OUTPUT:  
VIDEO input (RCA), AUDIO input (RCA)  
VIDEO output (RCA), AUDIO output (RCA)  
Headphone jack: stereo mini jack (3.5 mm diameter)  
Accessories  
• Remote control unit: RM-C368GY  
• AA / R6 / UM-3 dry cell battery × 2  
• Rod aerial × 1 (AV-14F43 only)  
Design and specifications subject to change without notice.  
Broadcasting systems  
System  
Colour  
Area  
Country or Region  
Sound  
Bahrain, Kuwait, Oman, Qatar,  
United Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore, Thailand,  
India, etc.  
PAL  
B/G  
Asia,  
Middle  
East  
China, Vietnam, etc.  
PAL  
PAL  
D/K  
I
Hong Kong, etc.  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Russia, etc.  
SECAM  
SECAM  
PAL  
B/G  
D/K  
D/K  
B/G  
I
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
PAL  
PAL  
Oceania Australia, New Zealand, etc.  
Republic of South Africa, etc.  
PAL  
B/G  
I
PAL  
Africa  
Nigeria, etc.  
PAL  
B/G  
B/G  
Egypt, Morocco, etc.  
SECAM  
20  
 

Intel Network Router 21555 User Manual
Interquartz Telephone 98380 User Manual
Jackson Remote Starter PRO 9776 User Manual
Jenn Air Cooktop PRO STYLE SEALED GAS COOKTOP User Manual
Jensen Indoor Furnishings KT3095 User Manual
JVC Flat Panel Television 1004MKH VT VT User Manual
Kawasaki Grinder 840273 User Manual
Kidde Smoke Alarm I12060 User Manual
KitchenAid Toaster KMTT400BW0 User Manual
Korg Electronic Keyboard Triton Studio User Manual