NEC CRT Television PF28WT100 User Manual

CONTENTS  
REMOTE CONTROL & TV CONNECTIONS  
4
5
IMPORTANT SAFEGUARDS  
INSTALLATION  
IN STRUCTIO N MAN UAL  
CO LO UR TELEVISIO N  
5
START UP  
6
CONNECTING EXTERNAL EQUIPMENT  
DAILY USE  
6
7
MENUS DESCRIPTION  
TELETEXT  
10  
15  
TROUBLESHOOTING  
SPECIFICATION  
18  
19  
PF2 8 W T1 0 0  
3
 
START UP  
Front  
LANGUAGE MENU  
TV/AV SELECTION  
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used  
for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further.  
Allows to switch between TV and external modes.  
By repeatedly pressing the remote control TV / AV (A5) or the TV front panel TV /  
AV (B7) button, the on-screen display is changed as shown :  
The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the FEATURES menu: see later  
section under MENU DESCRIPTION).  
AV1 > AV2 > SVHS > TV  
The descriptions used in the menu are those of the country code (e.g. AUS= Australia, NL = Holland etc).  
HEADPHONE SOCKET  
To hear TV sound with  
headphones, insert a 3.5mm  
headphone plug into the  
headphone socket (B4). The  
speaker’s sound will be  
automatically cut off.  
Selection is made by use of the remote control CURSOR UP (A6) / CURSOR DOWN (A21) keys and CURSOR RIGHT  
(A20) / LEFT (A7) keys.  
VIDEO GAME  
FRONT AV SOCKET (AV2)  
FRONT S-VIDEO JACK (Option for real flat TVs)  
Once you are satisfied with your selection, push the OK button (A18) to confirm your choice. The choice will briefly  
highlight in red, after which the menu will disappear.  
The front AV socket (B2) - (B3)  
has audio and video inputs. To  
switch from TV to these inputs,  
use the TV / AV buttons (A5) or  
(B7) and select AV2.  
The front S-VIDEO jack (B10) has video inputs only.  
It is necessary to connect the audio inputs to socket (B3)  
in order to have audio and video. To switch from TV to  
these inputs, use the TV / AV buttons (A5) or (B7) and  
select SVHS.  
OR  
Note : The languages shown are subject to modification without prior notice.  
CAMCORDER  
AUTOMATIC TUNING  
Automatic Tuning System  
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:  
- Select "ATSS " function.  
- Adjust to the required country.  
DAILY USE  
- Press and hold the OK button (A18) to start the automatic tuning.  
The ATSS function has started when the phrase "Please Wait !" appears (in red characters ) in the help instructions box, below the Install menu.  
When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic  
tuning is finished, press the remote control MENU button (A19) ).  
SWITCHING ON TV SET  
1) If stand-by indicator (B5) is red, then  
the TV set is in stand-by mode.  
You can switch on using the remote  
control POWER button (A1), the  
2) If stand-by indicator (B5) is not lit,  
then the TV set is powered off.  
You must press the TV set front  
panel MAIN POWER button (B1).  
If a picture does not appear, then  
the stand-by indicator will be  
3) If stand-by indicator (B5) is flashing red, and  
green then the TV set is in child-lock mode.  
It is necessary to use the remote control  
POWER button (A1), NUMBER 0….9 buttons  
(A3), or PROGRAM UP (A6) / DOWN (A21)  
buttons. The front panel PROGRAM  
UP/DOWN buttons (B9) will not function.  
Once on, the stand-by indicator turns to green  
and the picture appears on the screen.  
NUMBER 0….9 buttons (A3), or  
CONNECTING EXTERNAL EQUIPMENT  
The rear RCA(C1)(C2), RCA(C4)(C5) sockets, the front AV socket (B2) (B3), and the S-VHS socket (B10)  
are three dedicated sockets to connect audio-video equipment.  
If you push the button PR UP/DOWN, you can change from mode AV1(or AV2) to mode TV.  
PROGRAM UP (A6) / DOWN (A21)  
buttons. The front panel PROGRAM  
UP/DOWN buttons (B9) can also be used.  
Once on, the stand-by indicator turns to  
green and the picture appears on the screen.  
lighted red. In this case, use the  
remote control as indicated in 1).  
Rear  
REAR VIDEO & AUDIO SOCKET (AV1)  
This socket (C1)(C2) has video / audio inputs .  
Use the TV/AV buttons (A5) or (B7) to select AV1.  
REAR MONITOR OUT SOCKET  
1)Pressing the remote control POWER  
button (A1), you can switch off to  
stand-by mode (low power  
consumption mode) which also allows  
quick restart by remote control (see  
above: SWITCHING ON TV SET).  
2)Pressing the TV set front panel MAIN  
POWER button (B1), you can completely  
power off the TV set. In this case, you  
must use the same front panel POWER  
button (B1) to switch on again (see above:  
SWITCHING ON TV SET).  
SWITCHING OFF  
TV SET  
This socket (C4)(C5) has video / audio outputs.  
Remark: If a broadcast signal is not present after 30 minutes, the TV set will be automatically turned to stand-by mode.  
6
7
 
PROGRAM SELECTION (FROM 0 TO 99)  
PICTURE CONTROL  
You can select three pictures settings, by using the remote control NORMAL button (A17) :  
Normal I (standard hard picture)  
Normal II (standard soft picture)  
Favourite  
Direct selection  
Up / Down selection  
Use the remote control NUMBER 0….9 buttons (A3).  
For two digits program numbers, enter the second  
digit within 2 seconds.  
Use the remote control PROGRAM UP (A6) / DOWN  
(A21) buttons or the TV set front panel PROGRAM  
UP / DOWN buttons (B9).  
-
-
-
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE  
REDUCTION, use the PICTURE menu.  
If an NTSC signal is received, then the TINT adjustment will also be available.  
SOUND CONTROL  
Mono forcing, dual language  
If you are unable to get good sound  
-
01  
ABC  
01  
ABC  
01  
ABC  
FAVOURITE  
18:20  
Volume adjustment  
quality for a program due to poor  
reception, you can force a change  
from stereo to mono transmission by  
pressing the remote control MODE  
button (A14). Then the program status  
display will indicate "MONO" with a  
icon.  
NORMAL I  
NORMAL II  
Use the remote control VOLUME  
UP (A20) / DOWN (A7) buttons or  
the TV set front panel VOLUME UP  
/ DOWN buttons (B8).  
18:20  
18:20  
FREEZE picture  
- On the other hand, during a program  
with dual language transmission, the  
MODE button (A14) allows you to  
toggle between the first and second  
language. The program status  
display will indicate "DUAL 1" or  
"DUAL 2" (plus NICAM according to  
the received signal).  
This TV scans at 100Hz. It has an additional FREEZE picture function that holds the current image on the screen (similar in effect to  
the “pause” function of a video player). To freeze the image at any time, just press on the yellow FREEZE button (A26). This  
function is available with any signal source (from aerial, video player, DVD).  
The display will indicate that the FREEZE function is activated. A second press on the same button (A26), entry to the MAIN menu  
(A19), or change of program will cancel the FREEZE function.  
- To return to initial state, press again  
the MODE button (A14).  
Channel number  
Clock  
01  
ABC  
Channel name  
PROGRAM STATUS  
DISPLAY (Recall)  
Mute  
MONO  
18:20  
Sound transmission Mode:  
Displayed with forced icon(  
only if forced to mono by  
MODE button (A14)  
Mute the sound by pressing the remote control  
SOUND MUTE button (A2).  
)
Then,  
logo is displayed. The previous sound  
setting is returned after pressing the same button  
a second time.  
If a sound related function is used (e.g. VOLUME,  
3D) then the MUTE will also be cancelled.  
Sound effects  
Use the remote control RECALL button (A16) to display (for 4 seconds only) program status  
information. This display appears also after a program selection or after switching on the TV set.  
A SPATIAL sound effect is available, using the remote  
control 3D (A13) button.  
The following display appears:  
Spatial sound effect  
SPATIAL  
STEREO  
18:20  
SLEEP FUNCTION  
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP  
button (A4), you can enter one of the following settings :  
Sound transmission mode  
Clock  
OFF > 20 min > 40 min > 60 min > 80 min > 100 min > 120 min > OFF  
To return to initial sound effect, press again the 3D (A13) button.  
The following display appears:  
01  
ABC  
20  
STEREO  
Remaining time (minutes)  
before TV set switches off  
No sound effect  
OFF  
Sound transmission mode  
STEREO  
Clock  
18:20  
The SLEEP time remaining (before TV turn-off) can be seen again at any time by one  
touch on the remote control SLEEP button (A4).  
A second touch (while the status display is active) will modify the SLEEP time  
remaining.  
Manufactured under license from Dolby Laboratories, "Dolby"  
and the double-D symbol are trademarks of Dolby Laboratories.  
As an option, the sound effects PANORAMA and Dolby Virtual are  
available with the same button. For other adjustments such as  
BALANCE, EQUALIZER or AVL(option), use the SOUND menu  
(page11).  
FAVOURITE Format  
FORMAT SELECTION  
This contains the users preferred format setting. In order to enter new  
The following picture formats are  
settings, proceed as follows:  
AUTO setting :  
available:  
- Navigate the list of available formats with the ZOOM button (A15) until  
FAVOURITE is selected.  
If picture format signalling data is  
received, then the most appropriate  
ZOOM format will be automatically  
selected. In the absence of this data, the  
default ZOOM format will be selected(see  
page 13, ZOOM AUTO function under  
FEATURES MENU).  
AUTO> 4:3 > 14:9 > ZOOM 14:9 > ZOOM  
16:9 > FULL SCREEN > PANORAMA >  
FAVOURITE > AUTO.  
- While the selection FAVOURITE is active on the screen, the format can  
be manipulated by use of the CURSOR LEFT (A7), RIGHT (A20) buttons  
(to change the horizontal size) and the CURSOR UP (A6) or DOWN (A21)  
buttons (to change the vertical size).  
- The controls CURSOR RIGHT (A20) and CURSOR UP (A6) increase the size.  
- The controls CURSOR LEFT (A20) and CURSOR DOWN (A6) decrease the size.  
- The new settings are automatically memorized in the FAVOURITE format.  
If the OSD status display FAVOURITE is at any time lost (timeout is 3-4  
seconds after any previous use of the CURSOR keys), then a single touch  
of the ZOOM button (A15) is necessary before adjustment can be resumed.  
Otherwise, the preferred mode of the user  
can be forced by repeated pressing of the  
remote control ZOOM button (A15):  
8
9
 
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK  
(For operating instructions, see page 10, HOW TO USE THE SUB-MENUS)  
SETTING, WAKE UP, NOISE REDUCTION  
These functions are available in the Features menu (see description page 14).  
standby mode.  
PICTURE MENU  
- Select and adjust the level of each function : BRIGHTNESS, CONTRAST,  
COLOUR, SHARPNESS, TINT (if available).  
- The above modified values are automatically stored in FAVOURITE mode.  
- NOISE REDUCTION feature has 4 levels according to your preference.  
- The OK (A18) or NORMAL button will select the picture presets FAVOURITE,  
NORMAL I, NORMAL II. The currently selected preset is displayed in the  
menu header.  
CHILD LOCK  
This function only allows the TV to be turned on using the remote  
control. Once the user has set this CHILD LOCK to ON or OFF, it will  
remain in this condition until the user changes it again.  
Alternatively, the user can enter the time manually using the CLOCK  
function. However, if this is done the clock will not be periodically  
updated as would happen if the time is set automatically. We  
recommend that the user choose (if available) a CLOCK PROG  
which allows the time to be updated automatically.  
WAKE UP  
It is necessary to have set the clock (either manually or  
automatically) in order to be able to use this function. If the clock is  
not set (--:-- is shown) then the WAKE TIME and WAKE PROG. will  
not be selectable.  
The default setting for WAKE TIME is in the "OFF" position. After  
each use (the TV turns on according to the previous setting) the  
WAKE TIME will be returned to the "OFF" position, conserving  
always the last time setting entered ready for re-use.  
This function also operate, when “CHILD LOCK ON” is selected.  
- The FAVOURITE preset contains the settings that you last entered.  
DEFAULT ZOOM CONTROL  
If the ZOOM control is set to AUTO (A15, see page 9, FORMAT  
SELECTION), then the picture format presented is controlled by the  
received picture format signalling data embedded in the  
transmission. In the absence of this signalling data (as can often be  
the case) a default format must be used. This default format can be  
selected by the ZOOM AUTO function.  
If the NTSC standard is detected (eg from VHS player connected to AV1), then  
TINT will available. Otherwise TINT will be displayed, but not selectable.  
LANGUAGE  
This can be changed at any time by the user in the LANGUAGE  
menu (accessed via the FEATURES menu).  
SOUND MENU  
CLOCK SETTING  
The TV will automatically attempt to set the clock when powered on  
(with the MAIN POWER button). It takes as reference information  
embedded in the teletext signal of the channel defined by CLOCK  
PROG. Therefore, automatic clock setting is only possible if teletext  
is available on this channel.  
If no time is captured automatically (the clock will show - - : - -), then  
the TV will try again to set the clock whenever turning on from  
(For operating instructions, see page 10,HOW TO USE THE SUB-MENUS)  
MENUS DESCRIPTION  
MAIN MENU  
All menus are removed within 25 seconds if you don't press any button.  
Press the remote control MENU button (A19) to display the main menu.  
Then, you have the choice between several sub-menus:  
- Select VOLUME function to adjust the volume level.  
- Select BALANCE function to adjust sound balance between the left and right speakers. If the indicator is highlighted in red, then the central balance  
position has been found.  
If you want to Exit the main menu, press the MENU button (A19) a  
second time.  
- To select one of the sub-menus, use the remote control CURSOR UP  
(A6), DOWN (A21) buttons.  
- To enter the selected sub-menu, press the remote control OK button  
(A18).  
- Use the EQUALIZER function to select the sound presets MUSIC, SPEECH, NORMAL, FAVOURITE by use of the CURSOR LEFT (A7), RIGHT  
(A20) buttons. The FAVOURITE preset contains the settings that you last entered into the EQUALIZER menu.  
- The OK button (A18) will enter the EQUALIZER menu, and allow you to change the FAVOURITE settings.  
- Automatic Volume Level (AVL, Option) feature has 4 levels according to your preference. This feature corrects for large volume level changes, such  
as occur when passing from a movie to advertisements. The AVL solves this problem by equalizing the volume level, over a SHORT MEDIUM or  
LONG period (referring to the time constant over which the equalizing effect lasts).  
Remark: In AV mode the INSTALL menu is not available, and will not be selectable.  
HOW TO USE THE SUB-MENUS  
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.  
EQUALIZER MENU  
- Adjust the function using :  
- Select the equalizer band by use of the CURSOR LEFT (A7) or RIGHT  
(A20) buttons.  
- Adjust the level of each of the 5 equalizer bands, 120Hz, 500Hz, 1500Hz,  
5000Hz, 10000Hz, by use of the CURSOR UP (A6) and DOWN (A21)  
buttons.  
- The above modified values are automatically stored in FAVOURITE  
mode.  
- The OK button (A18) will select the picture presets MUSIC, SPEECH,  
NORMAL, FAVOURITE. The currently selected preset is displayed in the  
menu header.  
- The FAVOURITE preset always contains the settings that you last  
entered.  
- Select the desired  
Position by using the  
remote control  
CURSOR UP (A6) or  
DOWN (A21) buttons.  
- The remote control  
CURSOR LEFT (A7) or  
RIGHT (A20) buttons if you  
want to modify the function  
value  
- The remote control  
NUMBER 0...9  
buttons (A3) to enter  
directly new data.  
- Store (if needed) by  
pressing the remote  
control OK button  
(A18).  
- Then Exit to main menu  
by pressing the MENU  
button (A19).  
10  
11  
 
INSTALL MENU  
(For operating instructions, see page 9, HOW TO USE THE SUB-MENUS)  
Channel order changing  
Channel skipping  
Channel deleting  
- Select the program to move using the  
remote control CURSOR UP (A6) / DOWN  
(A21) buttons.  
- You can select skip "YES" or  
"NO" using the remote control  
RED "Skip" button (A11). A  
program with skip "YES"  
doesn't appear on screen  
when changing channels with  
the PROGRAM UP (A6) /  
DOWN (A21) buttons.  
- Select the program to delete using  
the remote control CURSOR UP  
(A6) / DOWN (A21) buttons.  
- Press the remote control YELLOW  
"Delete" button (A26). The deleted  
program is moved to program  
number 99 with skip changed to  
"YES". The existing 99 program is  
moved to program number 98 and  
so on.  
Automatic tuning system  
Program list edition  
TV system modification  
Channel number  
Country  
- Press the remote control GREEN "Move"  
button (A12): the program line background  
is highlighted in orange, and can be moved  
to another position using the remote control  
CURSOR UP (A6)/ DOWN (A21) buttons.  
- When the desired position is reached,  
confirm the new position pressing the  
remote control GREEN "Confirm" button  
(A12). Then the program line background  
will return again to gray.  
TV system  
Channel number  
Channel Frequency  
Channel name  
Program number  
Program storage number  
Channel Frequency  
Channel name  
Program number  
Program storage number  
Automatic Tuning System  
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:  
- Select "ATSS" function.  
- Adjust to the required country.  
- Press and hold the OK button (A18) to start the automatic tuning.  
The ATSS function has started when the phrase "Please Wait!" appears (in red characters)  
in the help instructions box, below the Install menu.  
When the ATSS function is finished, the stored programs are displayed on screen using  
Edit menu presentation (to Exit tuning before automatic tuning finished, press the remote  
control MENU button (A19))  
Warning: This television has been factory  
pretuned to channels 2, 7, 9, 10 and  
28. If the auto search function is  
activated, these preset channels will  
be deleted and new channels tuned  
to 1, 2, 3 ETC..  
Manual Channel Tuning  
Choose a starting point  
Channel searching  
Enter station name  
- Select with "Program" the  
program from which you want  
to start manual tuning. Then the  
channel number, the frequency,  
the name and the program  
- Select the "Frequency" function.  
- Press, and hold for more than 1  
second, the remote control  
CURSOR RIGHT (A20) [LEFT  
(A7)] buttons to start up [down]  
manual tuning.  
- Searching will stop automatically at  
the next channel found (to stop  
tuning, press the remote control  
MENU button (A19)).  
It is possible to enter your own choice of name for  
each program. You can change an existing name,  
or enter a name where none exists. If none exists  
"- - - - - - -" will be shown in the Install menu, and  
program status display ( see the section  
PROGRAM STATUS DISPLAY on page 8).  
- Select the "NAME" function.  
- Select one of the 7 character positions by using  
the remote control CURSOR RIGHT (A20) /  
LEFT (A7) buttons to move the cursor.  
Program List Edition  
This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below.  
number of this program are  
displayed in the Install menu.  
Program number  
Station name  
-
Then use the CURSOR UP (A6) /DOWN (A21) buttons  
to select the desired character for that position.  
Note: You can directly locate a  
program by entering the data  
into the "channel" or the  
"frequency" function.  
- Repeat the last two instructions for other  
positions, as desired.  
Channel number  
- Once the name has been entered, press the OK  
button (A18) to store it. The name will be  
memorised to the program number currently  
shown on the "Store To" line. The "Store To"  
program number will highlight in red briefly.  
Skip code  
: Program skipped  
Nothing : Program not skipped  
To enter the EDIT menu: From Install menu, select "Edit", and press the OK button  
(A18): the EDIT menu appears.  
Perform fine tuning  
Store program in memory  
- If you are unable to get a good  
picture or reasonable quality sound  
due to poor reception, it is possible  
to perform fine tuning.  
- Select the "frequency" function.  
- Press, for less than 1 second, the  
remote control CURSOR  
RIGHT(A20) [LEFT(A7)] buttons to  
perform up [down] fine tuning in  
steps of 0.05MHz (50 kHz).  
- Select the "store to" function  
The current program being displayed is highlighted in blue (on the central line). In the  
above case, the current program is PR00. The 3 previous, and 3 following programs,  
are always displayed. Any program from 00 to 99 can be selected, by using the  
remote control CURSOR UP (A6) / DOWN (A21) buttons.  
- Enter the program number you want to store  
to either by using the remote control  
CURSOR RIGHT (A20) / LEFT (A7) buttons,  
or directly by using the remote control  
NUMBER 0...9 buttons (A3).  
- Press the OK button (A18) to confirm.  
Remarks: this function can also be used if you  
want to copy a program already memorised to  
another program number.  
The memorised programs can be modified as follows :  
12  
13  
 
TELETEXT  
FEATURES MENU  
See section near the end of section DAILY USE for a more detailed explanation of these functions.  
(For operating instructions see page 10, HOW TO USE THE SUB-MENUS)  
ENTERING/LEAVING TELETEXT MODE  
- Select the desired program with teletext.  
- Press the remote control TELETEXT ( ) button (A22) to select teletext  
mode. The initial page (or the last page viewed if you have already used  
teletext in the present channel) appears.  
1. Adjust this value ON or OFF.  
- In stand-by mode, the stand-by indicator flashes red and  
green to indicate the CHILD LOCK is set.  
- The front panel TV buttons (B7, B8, B9) become inactive  
and the TV will only respond to the remote control.  
- Picture And Teletext (PAT) function : If you want to watch the TV program  
and use teletext at the same time, press the TELETEXT button (A22)  
again. Teletext will be displayed on the left hand part of the screen, and  
the whole TV picture will be compressed into right hand part of the  
screen.  
1. When switched to ON:  
Prevents the use of the TV set without remote control  
2. Wake up function  
2. - Switch the WAKE UP function OFF or ’ON’ (the time will be  
shown e.g. 07:15) with the remote control CURSOR LEFT  
(A7) /RIGHT (A20) buttons  
- Enter the wake up time with the remote control 0...9  
NUMBER (A3) buttons  
This function is only selectable when the clock is set.  
The TV set turns on from stand-by at the WAKE TIME  
with the programme entered on the WAKE PROG. line.  
Put the TV set on stand-by with the remote control  
- To return to TV mode, press again the TELETEXT ( ) button (A22).  
3. Shared with WAKE TIME.  
3. Adjust TV turn-on program number  
4. TV clock setting  
4. Adjust TV clock. Clock will start at 0 seconds upon entry  
of the 4th figure.  
The prog. no. which can be used to automatically seize the  
time at turn on can be entered here.  
This function allows user to enter the time manually.  
Note : If you turn off the set with the main power button,  
the clock setting is lost. An automatic attempt is made to  
set the clock again at power on.  
PAGE SELECTION  
5. The selection of this format, will be used as the default of the  
TV, when it starts to "ON" condition.  
5. This function is only selectable, when the ZOOM button (A15) at  
the remote is selecting AUTO.  
- You can directly enter the 3 figure page number by using the remote control NUMBER 0...9 buttons (A3).  
- You can sequentially select teletext pages by pressing the remote control PAGE UP (A6) / DOWN (A21) buttons.  
6. The currently selected LANGUAGE is displayed.  
Press the OK button (A18) to access the menu and change  
the selection.  
6. LANGUAGE menu entry.  
- At the base of the screen a menu of coloured page links is available, showing either page numbers or a title with headings (eg Sport,  
News) in RED, GREEN, YELLOW or CYAN colour. These pages can be accessed by using the corresponding coloured buttons (A11,  
A12, A26, A25) on the remote control.  
Once a request is made, the page number is shown in the extreme top left corner of the screen. If the requested page is not  
immediately available the rolling header will be active until the page arrives.  
LANGUAGE MENU  
- Select the preferred LANGUAGE by use of the CURSOR LEFT (A7),  
RIGHT (A20) buttons, and the CURSOR UP (A6) or DOWN (A21) buttons.  
- Press the OK button (A18) to confirm the selection (the choice will be  
highlighted in red).  
Note : The languages shown are subject to modification without prior notice.  
14  
15  
 
TELETEXT FORMAT PICTURE & SOUND CONTROL  
Doubling character height  
Repeatedly pressing the HEIGHT button  
order:  
(A23) doubles the character height in the following  
Upper half of the page (UP) > Lower half of the page (DOWN) > Return to normal height.  
If the page is in UP or DOWN mode, then normal size is automatically set if :  
- A new page request is made (e.g. CYAN, INDEX or PAGE UP/DOWN).  
- CANCEL mode (A8) function is used.  
USEFUL TELETEXT FUNCTIONS  
INDEX  
button (A18): Allows you to return directly to the  
PAGE HOLD button  
subpage can be held on the screen by pressing the  
PAGE HOLD button.  
(A9): Any teletext page or  
- VOLUME menu is activated the with the MENU button (A19).  
initial teletext page.  
Note : The menu at the base of the screen is always visible  
- The page number shown in the extreme top left corner  
of the screen will become red.  
- Press the HOLD button again to cancel hold mode (the  
page number will return to white).  
Volume and brightness control in teletext mode  
VOLUME ( and sound MUTE), BRIGHTNESS and CONTRAST controls are all possible in teletext. The BRIGHTNESS and CONTRAST  
controls are dedicated to the teletext display.  
- Access the VOLUME control by pressing the MENU button (A19) in teletext mode. A barograph will appear in the lower part of the screen  
(as in TV mode). If MUTE is active a mute icon is also shown.  
- A second press on the MENU button (A19) will access the BRIGHTNESS control, and a third press the CONTRAST control.  
- The active bargraph will timeout after 3-4 seconds (as in TV mode VOLUME control) or by pressing on the MENU button (A19) a fourth  
time (after CONTRAST control)  
- Each control can be adjusted by using the remote control CURSOR RIGHT (A20) / LEFT (A7) buttons.  
- Mute can always be activated by pressing the SOUND MUTE button (A2).  
- Any change to the VOLUME level will cancel the SOUND MUTE.  
SUBPAGE button  
(A10): Allows you to request a specific subpage:  
- Press the SUBPAGE button (A10). At the base of the screen a  
SUBPAGE menu will appear. This has a red subpage minus  
link, a green subpage plus link, plus a white background  
showing (e.g. for page 110), 110 / 0001. This is ready to  
accept the subpage number.  
- Enter directly the subpage number you want with the remote  
control NUMBER 0...9 buttons (A3): for example to request the  
2nd subpage, type 0002.  
- Alternatively, use the red subpage minus link or the green  
subpage plus link.  
- The subpage number entered is shown at the base of the screen.  
- If the requested page is not immediately available the rolling  
header will be active until the page arrives. Warning: If the  
subpage is not available (does not exist), then the header will  
roll continuously and no new page will be found.  
- To exit subpage mode, press the SUBPAGE button (A10) again.  
Note : Teletext specification allows for subpage numbers 0000  
to 3979 (the first figure is limited to the range 0..3, and  
the third figure 0..7).  
WATCHING TV WHILE PAGE SEARCHING  
The CANCEL function can be used to make the teletext page transparent, thus revealing  
the TV picture:  
- To enter cancel mode, press the CANCEL  
button (A8) while in teletext mode. The TV  
program will reappear on the screen, while only the teletext page number remains at the  
top and left corner of the screen.  
REVEAL  
button (A24): Press this button to reveal,  
- You can enter a new page number in this mode only by using the remote control  
on certain pages, hidden information such as the  
answer to a quiz.  
- Press the button again to hide the information.  
NUMBER 0...9 buttons (A3), or with the INDEX  
button (A18).  
- If a page has been requested, but has not yet arrived, "???" flashing characters will be  
displayed until the page arrives. Otherwise, the same characters will be displayed  
without flashing until the next arrival of the page in the transmission cycle. Once arrived  
the page number will be displayed.  
- The teletext page can be made visible again by pressing the CANCEL  
- It should be noted that the TV program cannot be changed while in cancel mode.  
button (A8).  
WATCHING TV WITH TELETEXT SUBTITLES  
If the actual teletext page is a news flash or subtitle page, then most of the TV picture becomes visible. In this situation the ZOOM  
format chosen in TV mode is reactivated, where possible.  
This is particularly useful while watching a program with the teletext subtitles. Only formats which do not allow the full height of the  
TV picture to be seen are not possible in teletext mode, as these would not allow all teletext lines to be displayed.  
Therefore only the formats ZOOM 14:9 AND ZOOM 16:9 (available with wide screen TV models) cannot be preserved with teletext  
subtitles. In this situation the default format FULL SCREEN (equal to 16:9) will be used.  
For FAVOURITE format, FULL SCREEN will also be used only if the vertical size chosen is greater than 100%.  
Note : A 16:9 or 14:9 format can be realised by keeping a 100% vertical size, but reducing the horizontal size, thus allowing teletext  
subtitles to be used over a picture that has no distortion.  
16  
17  
 
TROUBLESHOOTING  
SPECIFICATION  
Color system  
Sound system  
TV Standard  
PAL, NTSC 3.58 4.43(AV)  
/
B/G, H, M(AV)  
BBefore Asking for Service:  
Rated voltage  
AC 240V~, 50Hz  
Neither picture nor sound:  
Picture is OK, but no  
sound:  
Sound is OK, but no  
color:  
Overlapped Picture  
Image:  
Power on  
97W  
Power consumption  
•Is power cord plugged in?  
Check if “Volume Down” is  
pressed.  
•Check if the “Volume Control”  
is set to the minimum position.  
•Check if the “Color Control” is  
set to the minimum position.  
•Check if the program on air is  
in color, or in black and white.  
•Check if the antenna  
installation and its connection  
are OK.  
•Check if the antenna direction  
is correct.  
•Check if the “Frequency”  
function is set up correctly.  
Stand-by  
3W Under  
Sound Output Power  
Channel Coverage  
7W X 7W(10% THD. 60% MOD. At 1kHz)  
BAND I : CH0 - CH4 [CH0(46.25Mhz), CH2(64.25Mhz)]  
BAND II : CH5 - CH12 [CH7(182.25Mhz), CH10(196.25Mhz)  
CH10(209.25Mhz)]  
CABLE BAND : S1’ - S3’, S1 - S20  
HYPER BAND : S21 - S41  
VHF  
UHF  
•Adjust the volume with  
“Volume Up” button.  
•Check the antenna again.  
•Check by turning on other  
channel programs.  
•Refer to the color section  
again, and readjust the color.  
•Direct the antenna toward the  
broadcasting station.  
•Adjust the “Frequency”  
function.  
•Press power button on the front of  
TV.  
•If the red power light is on, press  
the remote control power button.  
Red power light should be green.  
BAND IV, V : CH21 - CH69 [CH28(527.25Mhz)]  
Frequency Synthesizer Tuning System  
Tuning System  
Channel Indication  
On Screen Display  
100 Programs  
Program Selection  
Aux. Terminal  
AV1 (Rear): RCA Jack  
AV2 (Front): RCA Jack, S-VHS(Front): S-Video  
Input  
Output Monitor out (Rear): RCA Jack  
r u l s o t n  
T o b e h o i g :  
RD-D110(Required two 1.5V battries type with AAA size)  
Remote Control Unit.  
Dimension  
Picture tube  
Weight  
840(W) x 512(H) x 499.5(D) mm  
28" WIDE FLAT TYPE  
39kg  
Picture has “Snow”:  
Stripes on picture:  
Bad stereo sound:  
Operation disorder of Remote  
Control:  
Check if the antenna is  
damaged or its connection is all  
right.  
•Check if there is an interference  
by other electronic devices, such  
as radio, telephone, etc.  
•Long distance from the station  
or other radio waves could  
cause bad sound reception.  
•Check if the batteries are low.  
•Check “Remote Control Sensor”  
window.  
•Check if there is an interference  
from car traffic or neon signs.  
•Correct the antenna faults or  
replace the connection cable.  
•Keep magnetic or electronic  
devices away from the set.  
•Shift the mode into “Mono” by  
using “MODE” button.  
•Get rid of objects blocking the  
TV sensor and Remote  
Control  
•Replace batteries or check if  
the electrodes are fitted  
properly in the compartment.  
18  
19  
 
NEC Australia Pty. Ltd.  
ABN 86 001 217 527  
Home Electronics Group  
NEC Service Centres  
PH: 131-632  
NEW South Wales  
Sydney  
Newcastle  
184 Milperra Rd, Revesby 2212  
120 Parry Street, Newcastle West 2302  
(02)9780 8688  
(02)4926 2466  
Victoria  
Melbourne  
Unit 1/6 Garden Road, Clayton 3168  
(03)8562 6245  
Queensland  
Brisbane  
Southport  
Unit 4/305 Montague Road, WEST END 4101  
Shop 1, 48 Ferry Road, Southport 4215  
(07)3840 5858  
(07)5591 3670  
South Adelaide  
Adelaide  
84A Richmond Rd, Keswick, 5053  
45 Sarich Court, Osborne Park 6017  
(08)8375 5710  
(08)9445 5901  
Western Australia  
Perth  
For Service in outer areas, please contact your NEC retailer for the address of the nearest  
Authorised NEC Service Centre.  
NEC Australia Pty. Ltd.  
Home Electronics Group  
244 Beecroft Road EPPING 2121  
Tel: 131 632  
Fax: (02)9877 2353  
 

Miele Washer G 7827 User Manual
National Instruments Thermometer SCC TC01 User Manual
Nokia Bluetooth Headset BH 203 User Manual
NordicTrack Treadmill NTL10951 User Manual
NorthStar Navigation Fish Finder NorthStar 491 User Manual
Omron Blood Pressure Monitor i Q132 User Manual
Optimus Stereo System 120 2180 User Manual
Oritron Home Theater System ICS 2100 User Manual
Paradyne Fax Machine Model 6039 MVL User Manual
Patton electronic Network Card 1004 User Manual