camera solutions
PRODUCT SPECIFICATION
IXE20 Series Sarix® IP Camera
2.1 MEGAPIXEL EXTENDED PLATFORM HIGH DEFINITION DIGITAL CAMERAS
Product Features
• Open IP Standards
• Up to 2.1 Megapixel Resolution (1920 x 1080)
• Up to 30 Images per Second (ips) at 1920 x 1080
• Auto Back Focus
• H.264 and MJPEG Compression Capability
• Color and Day/Night Models
• Video Setup Jack
• Sensitivity Down to 0.03 Lux
(LENS NOT SUPPLIED WITH CAMERA)
• Power over Ethernet (IEEE 802.3af) or 24 VAC
• Up to 2 Simultaneous Video Streams
• Built-in Analytics
• Motion Detection
• Local Storage (Mini SD) for Alarm Capture
• Audio Accessory Available
The Sarix® IXE20 Series extended platform (EP) is a
2.1 megapixel (MPx) network camera designed with industry-leading
image quality and high performance processing power. Designed to
install quickly, the camera includes automatic back focus control,
built-in analytics, and other advanced features needed for
demanding security applications.
Built-in Analytics
Pelco Analytics enhance the flexibility and performance of the
IXE20 Series camera. Eight Pelco behaviors are preloaded and
included as standard features of the IXE20C and IXE20DN models.
Pelco behaviors can be configured and enabled using a standard Web
browser, and they are compatible with Endura® or a third-party
system that supports Pelco’s Analytics API system. Camera models
are also available with preloaded OV Analytic Suites.
Sarix technology defines the next generation of video security
imaging performance, delivering high definition (HD) resolution,
advanced low-light capabilities, consistent color science, and fast
processing power. The H.264 compression video files are
considerably smaller, making HD video more affordable.
Web Interface
The IXE20 Series uses a standard Web browser for powerful remote
setup and administration.
Window Blanking
Camera
Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The IXE20 Series supports up to
four blanked windows. A blanked area will appear on the screen as
a solid gray window.
The IXE20 Series has two 2.1 megapixel models: color and
day/night. Both models feature advanced low-light technology
capabilities. The day/night model has a mechanical IR cut filter for
increased sensitivity in low-light installations.
Video Systemization
The IXE20 Series can support two simultaneous video streams. The
two streams can be compressed in MJPEG and H.264 formats across
several resolution configurations. The extended platform gives
real-time video (30 ips) with HD resolution using H.264 compression
for optimized bandwidth and storage efficiency. The streams can be
configured to a variety of frame rates, bit rates, and GOP (group of
pictures) structures for additional bandwidth administration.
The IXE20 Series easily connects to Pelco IP and hybrid systems
such as Endura version 2.0 (or later) and Digital Sentry® version 4.3
(or later). The camera is also compatible with Digital Sentry NVs
(DS NVs), a full-featured video management software, which is
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.
The IXE20 Series features open architecture connectivity to
third-party software. Pelco offers an application programming
interface (API) for interfacing with Pelco’s network cameras.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2955 / REVISED 7-1-11
TECHNICAL SPECIFICATIONS
The following diagram illustrates how the camera system interprets streaming video when embedded analytics are configured and enabled.
SARIX
VIDEO
ANALYTICS OVERLAY
• CONFIGURATION
• ALARMS
• PELCO ANALYTICS API / OV READY
SYSTEM
IMPORTANT NOTE: PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ,
requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.
TECHNICAL SPECIFICATIONS
GENERAL
MECHANICAL
Lens Mount
Camera Mount
Imaging Device
1/3-inch (effective)
CMOS
Progressive scan
1920 x 1080
50 dB
DC drive
1 ~ 1/100,000 sec
60 dB
CS mount, adjustable
0.25-inch (0.64 cm) UNC-20 screw, top and
bottom of camera housing
Imager Type
Imager Readout
Maximum Resolution
Signal-to-Noise Ratio
Auto Iris Lens Type
Electronic Shutter Range
Wide Dynamic Range
White Balance Range
ENVIRONMENTAL
Operational Temperature
Storage Temperature
Storage Humidity
–10° to 50°C (14° to 122°F)
–10° to 70°C (14° to 158°F)
20% to 90%, noncondensing
2,000° to 10,000°K
Sensitivity
Color (33 ms)
Color SENS (500 ms)
Mono (33 ms)
Mono SENS (500 ms)
f/1.2; 2,850°K; SNR >24 dB
0.50 lux
0.12 lux
0.25 lux
0.03 lux
Weight (without lens)
Shipping Weight
0.50 kg (1.11 lb)
0.90 kg (2.00 lb)
ELECTRICAL
Port
RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Cabling Type
Power Input
Cat5 or better for 100Base-TX
22 to 34 VAC; 24 VAC nominal or PoE (IEEE
802.3af class 3)
Power Consumption
<7 W
Current Consumption
PoE
<200 mA maximum
24 VAC
<295 mA nominal; <390 mA maximum
Local Storage
Alarm Input
Alarm Output
Service Port
Mini SD
10 VDC maximum, 5 mA maximum
0 to 15 VDC maximum, 75 mA maximum
External 3-connector, 2.5 mm provides
NTSC/PAL video output
SERVICE
PORT
LED
FRONT VIEW, CAMERA ONLY
(OPENED TO EXPOSE SERVICE PORT)
NOTE: VALUES IN PARENTHESES ARE INCHES;
ALL OTHERS ARE CENTIMETERS.
13.67
(5.40)
4.90
(1.95)
7.59
8.53
REAR VIEW
(3.00)
(3.37)*
7.92
(3.12)
*FRONT COVER OPEN
TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding
Video Streams
H.264 High, Main, or Base profiles and MJPEG
Up to 2 simultaneous streams; the second stream
is variable based on the setup of the primary
stream
Frame Rate
Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3,
2.5, 2, 1 (dependent upon coding, resolution, and
stream configuration)
Available Resolutions
Resolution
MJPEG
H.264 High Profile
Aspect Maximum Recommended Maximum Recommended
MPx Width Height Ratio
IPS
Bit Rate
10.0 Mbps
10.0 Mbps
10.0 Mbps
10.0 Mbps
10.0 Mbps
7.7 Mbps
4.9 Mbps
1.2 Mbps
IPS
Bit Rate
6.0 Mbps
4.0 Mbps
3.4 Mbps
3.0 Mbps
2.9 Mbps
2.0 Mbps
1.5 Mbps
0.5 Mbps
2.1
1.9
1.3
1.2
0.9
0.5
0.3
0.1
1920
1600
1280
1280
1280
800
1080
1200
1024
960
16:9
4:3
30.0 ips
20.0 ips
20.0 ips
20.0 ips
30.0 ips
30.0 ips
30.0 ips
30.0 ips
30.0 ips
20.0 ips
20.0 ips
20.0 ips
30.0 ips
30.0 ips
30.0 ips
30.0 ips
5:4
4:3
720
16:9
4:3
600
640
480
4:3
320
240
4:3
Additional Resolutions
Supported Protocols
640 x 512, 640 x 352, 480 x 368, 480 x 272,
320 x 256, and 320 x 176
TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,
DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3,
QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP,
FTP, and 802.1x (EAP)
Users
Unicast
Up to 20 simultaneous users depending on
resolution settings (2 guaranteed streams)
Unlimited users H.264
Multicast
Security Access
Password protected
Software Interface
Pelco System Integration
Open IP Integration
Web browser view and setup
Endura 2.0 (or later) Digital Sentry 4.2 (or later)
Pelco IP camera API
Minimum System Requirements
Processor
Operating System
Intel® Core® 2 Duo microprocessor, 2.6 GHz
Microsoft® Windows® XP, Windows Vista®, or
Mac® OS X 10.4 (or later)
Memory
Network Interface Card
Monitor
2 GB RAM
100 megabits (or greater)
Minimum of 1024 x 768 resolution, 16- or 32-bit
pixel color resolution
Web Browser*
Media Player†
Internet Explorer® 7.0 (or later) or Mozilla® Firefox®
3.5 (or later); Internet Explorer® 8.0 (or later) is
recommended for configuring analytics
Pelco’s Media Player or QuickTime® 7.6.5 for
Windows XP, Windows Vista, or QuickTime 7.6.4
for Mac OS X 10.4
*Internet Explorer is not supported by Mac OS X 10.4.
†This product is not compatible with QuickTime version 7.6.4 for Windows XP or
Windows Vista. If you have this version installed on your PC, you will need to
upgrade to QuickTime version 7.6.5.
ANALYTICS
Required Systems for
Pelco Analytics
Pelco Interface
WS5200 Advanced System Management Software
on an Endura 2.0 (or later) system
Open API
Pelco analytics allow streaming information to
communicate though Pelco’s API Guide for Video
Analytics version 0.55.30 (or later), available at
Pelco.com/IP
Required System for
Object Video Suites
OV ready-compliant system with OV Ready video
management system
TECHNICAL SPECIFICATIONS
MODELS
RECOMMENDED LENSES
IXE20C
Sarix 2.1 MPx network color camera,
extended platform with built-in Pelco
Analytics
Sarix 2.1 MPx network day/night camera,
extended platform with built-in Pelco
Analytics
Sarix 2.1 MPx network color camera,
extended platform with built-in
OV Security Suite
Sarix 2.1 MPx network day/night camera,
extended platform with built-in
OV Security Suite
Sarix 2.1 MPx network color camera,
extended platform with built-in
OV Security Suite Plus
Sarix 2.1 MPx network day/night camera,
extended platform with built-in
OV Security Suite Plus
Sarix 2.1 MPx network color camera,
extended platform with built-in
OV Event Counting Suite
Sarix 2.1 MPx network day/night camera,
extended platform with built-in
OV Event Counting Suite
13M2.2-6
13M2.8-8
13M2.8-12
13M15-50
Megapixel lens, varifocal, 2.2 ~ 6.0 mm,
f/1.3 ~ 2.0
Megapixel lens, varifocal, 2.8 ~ 8.0 mm,
f/1.2 ~ 1.9
Megapixel lens, varifocal, 2.8 ~ 12.0 mm,
f/1.4 ~ 2.7
Megapixel lens, varifocal, 15.0 ~ 50.0 mm,
f/1.5 ~ 2.1
IXE20DN
IXE20C-OS
IXE20DN-OS
IXE20C-OSP
IXE20DN-OSP
IXE20C-OCP
IXE20DN-OCP
Pelco megapixel lenses have been designed and tested to deliver optimal
image quality for the IXE20 Series camera. The use of standard definition
lenses on IXE20 Series megapixel cameras will limit the resolution of the
camera, creating poor image quality.
Aspect Ratio
Field of View
in Degrees
16:9
109
63
89
48
42
24
32
18
21
12
16
9
4:3
109
83
89
66
42
32
32
24
21
16
16
12
5
5:4
109
89
89
70
42
34
32
25
21
17
16
13
5
Horizontal
2.2 mm
2.8 mm
6.0 mm
8.0 mm
12.0 mm
15.0 mm
50.0 mm
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
Horizontal
Vertical
Horizontal
Vertical
ACCESSORIES
IX-SC
Horizontal
Vertical
5
4-foot Sarix service cable; compatible with
standard BNC connectors
External audio accessory
External alarm accessory
3
4
4
AUD-1
ALM-1
Note: For 800 x 600 (or lower) resolutions in 4:3 or 5:4 aspect ratios, the field
of view is smaller than listed above. Refer to the Installation/Operation
manual for details.
RECOMMENDED MOUNTS
C10-UM
Universal camera mount
RECOMMENDED ENCLOSURES
EH1512
EH3512
DF8
Indoor/outdoor enclosure
Outdoor enclosure
8-inch fixed mount dome
Pelco by Schneider Electric
Pelco, the Pelco logo, and other trademarks associated with Pelco products
referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All
other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2011, Pelco, Inc. All rights reserved.
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
|