KEG COUPLERS
No. 26000F
Perlick Smart Couplers
Retrofit Empty Keg Sensor
✓ Keeps beer loss to a minimum
✓ Speeds service on keg changeovers
✓ Minimizes overfoaming
Existing Perlick single valve keg couplers can be retrofitted
to function as Smart Couplers. Simply replace the probe
with Perlick’s No. 40125 empty keg sensor. Bulk-packed.
Weight: 8 oz. each
The patented Perlick Smart Coupler* combines an integral
Empty Keg Sensor with a quality keg coupler to eliminate
the need for wall-mounted FOB devices. It senses when a
keg is empty and shuts off the beer flow, yet leaves the line
fully charged with beer. This prevents gas from entering an
empty line causing excessive foaming when tapping a
fresh keg. Packed 25 per case. Weight: 1 lb. 8 oz. each
Part No.
Description
40125...................................For domestic kegs
40119 ...................................For imported kegs
Cleaning Adapters
Single and dual cleaning
adapters are uniquely
designed to operate
when Perlick’s keg cou-
pler is in the untapped
(handle up) position,
Part No.
Description
26000F* ...............................For Domestic Kegs
27500F.................................For Imported Kegs
*U.S. Patent #5,630, 441
No. 43657
No. 43681
No. 43659
Single
Adapter
Dual
Adapter
Series
Adapter
allowing the system to be cleaned from the faucet through
the keg coupler. Prevents solution from entering the CO2
line, eliminating beer contamination when retaping. Brass
nickel plated (Bulk Packed)
Part No.
Description
43657* .................................Single/domestic kegs
43681* .................................Dual/domestic kegs
43659* .................................Series/domestic kegs
43699...................................Single/imported kegs
43702...................................Dual/imported kegs
*Note: These adapters are designed to be used with all Perlick single
valve couplers and most competitor’s couplers. Must be used with Smart
Couplers when cleaning lines from the faucet through the Smart Coupler.
No. 43739
Lo-Boy Coupler for Single
Valve Domestic Kegs
Universal Empty Keg Sensor
Uniquely constructed to tap a keg
in limited space. Just push down
and twist to tap.
Controls the amount of beer loss by closing off the beer
flow when a keg empties. Mounts directly to the keg
coupler for dual probe or imported kegs.
Part No.
Description
Part No.
Description
40030 ............................Lo-Bo
43739...................................Universal empty
keg sensor
KEG COUPLERS
D-Series Keg Couplers for Single Valve
Domestic and Imported Kegs
Exclusive two-piece rotating probe helps prevent twisting
beer lines. Nickel-plated, forged brass body with three
internally mounted seals. Floating ball check valve equal-
izes line pressure. Relief valve vents over-pressurized
kegs. Optional Locking Shield prevents accidental untap-
ping. Converts for domestic or imported kegs by changing
probe tip. Individually packed, 25 per case. Weight 24 oz.
each.
No. 26000D
For Domestic Kegs
Part No.
Descriptionr
No. 26000D1
26000D..........................................Probe, less lock
26000D1........................................Probe, with lock
For Imported Kegs
Part No.
Description
27500D..........................................Probe, less lock
27500D1........................................Probe, with lock
No. 32695
Lug Straightener for Single Valve Kegs
Part No.
Description
32695 .........................................Lug straightener
Keg Coupler Replacement Parts
Item
Part No.
Description
Keg Coupler Replacement Parts
1..................32499...........................Probe assembly, domestic kegs
2..................32610* .........................Probe assembly, imported kegs
3..................43641-1 .......................Ball retaining spring
4..................32461-1A.....................Probe center stem
5..................C14316........................Buna-N O-ring
3
6..................31080-2P.....................Ball check, Poly
7..................31079-1 .......................Tip, domestic kegs
19
21
4
8..................31478-1*......................Tip, Imported kegs
9..................31089-2P.....................O-ring (3 per assembly)
10..................43061...........................Coupler body
11..................31088-2P.....................Bottom seal washer
12..................31087-2P.....................Probe washer, domestic
13..................31479-1*......................Probe washer, imported
14..................23682-2P.....................Check valve
15
5
6
1
2
8
7
20
18
9
15..................157R2P........................Washer
16..................2068-1..........................Tailpiece
17..................2026.............................Nut
14
15
16
17
18..................31084-1 .......................Retaining screw
19..................43001A ........................Yoke less lock, domestic
19..................43090A*.......................Yoke less lock, imported
20..................43002A ........................Yoke with lock, domestic
20..................43091A*.......................Yoke with lock, imported
21..................2036SS........................Elbow for bent probe
22..................32474-1 .......................Wrench
10
11
22
13
12
*Replacement part used exclusively for Keg Couplers for Imported Kegs.
|