Signature
32HFL7406D/10
42HFL7406D/10
HotelTV User Manual
Philips Hospitality – Dec. 2011
• Risk of overheating!
Never install the TV in a confined space. Always
leave a space of at least 4 inches or 10 cm
around the TV for ventilation. Ensure curtains
or other objects never cover the ventilation
slots on the TV.
2 Important
Read and understand all instructions before you use
your TV. If damage is caused by failure to follow
instructions, the warranty does not apply.
• Risk of damage to the TV!
Before you connect the TV to the power outlet,
ensure that the power voltage matches the
value printed on the back of the TV. Never
connect the TV to the power outlet if the
voltage is different.
Safety
• Risk of electric shock or fire!
• Never expose the TV to rain or water. Never
place liquid containers, such as vases, near
the TV. If liquids are spilt on or into the TV,
disconnect the TV from the power outlet
immediately. Contact Philips Consumer Care
to have the TV checked before use.
• Never place the TV, remote control or batteries
near naked flames or other heat sources,
including direct sunlight.
• Risk of injury, fire or power cord damage!
Never place the TV or any objects on the power
cord.
• To easily disconnect the TV power cord from the
power outlet, ensure that you have full access to
the power cord at all times.
• When you disconnect the power cord, always pull the
plug, never the cable.
• Disconnect the TV from the power outlet and aerial
before lightning storms. During lightning storms,
never touch any part of the TV, power cord or
aerial cable.
• Risk of hearing damage! Avoid using earphones or
headphones at high volumes or for prolonged
periods of time.
To prevent the spread of fire, keep candles or
other flames away from the TV, remote control
and batteries at all times.
• Never insert objects into the ventilation slots or
other openings on the TV.
• When the TV is swivelled ensure that no strain is
exerted on the power cord. Strain on the
power cord can loosen connections and cause
arcing.
• If the TV is transported in temperatures below 5°C,
unpack the TV and wait until the TV temperature
matches room temperature before connecting the
TV to the power outlet.
• Risk of short circuit or fire!
• Never expose the remote control or batteries to
rain, water or excessive heat.
• Avoid force coming onto power plugs. Loose
power plugs can cause arcing or fire.
Screen care
• Risk of injury or damage to the TV!
• Two people are required to lift and carry a TV
that weighs more than 25 kg.
• Avoid stationary images as much as possible.
Stationary images are images that remain on-
screen for extended periods of time. Examples
include: on-screen menus, black bars and time
displays. If you must use stationary images, reduce
screen contrast and brightness to avoid screen
damage.
• When stand mounting the TV, use only the
supplied stand. Secure the stand to the TV
tightly. Place the TV on a flat, level surface
that can support the combined weight of the
TV and the stand.
• When wall mounting the TV, use only a wall
mount that can support the weight of the TV.
Secure the wall mount to a wall that can
support the combined weight of the TV and
wall mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper wall
mounting that result in accident, injury or
damage.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft, damp cloth.
Never use substances such as alcohol, chemicals
or household cleaners on the TV.
• Risk of damage to the TV screen! Never touch, push,
rub or strike the screen with any object.
• To avoid deformations and colour fading, wipe off
water drops as soon as possible.
• Risk of injury to children!
Disposal of your old product and
batteries
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
• Never place the TV on a surface covered by a
cloth or other material that can be pulled away.
• Ensure that no part of the TV hangs over the
edge of the surface.
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical and
electronic products.
• Never place the TV on tall furniture (such as a
bookcase) without anchoring both the furniture
and TV to the wall or a suitable support.
• Educate children about the dangers of climbing on
furniture to reach the TV.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
3
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences for
the environmental and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
4
1. Professional
Mode
Professional Setup Remote
control (22AV8573 optional)
instruction
__________________________
Introduction
Included in this TV is a special functional
mode that allows the TV to be configured for
commercial application. This feature is called
Professional mode.
This section has been designed to help install
and operate this TV in Professional mode.
Before reading this section, please also read
section 3 to set the basic functionality of this
TV.
If the TV is not switched on, use
the mains switch to switch the
TV on.
__________________________
Benefits of Professional mode
This TV is specially designed to operate in
Professional Mode. Professional Mode offers
the following benefits:
Access to the [TV Setup Menu] can be
blocked. This prevents users (e.g. guests)
from deleting or changing channel settings and
/ or modifying picture and sound settings. This
ensures that TVs are always set up correctly.
•
A switch-on volume and channel can be
selected. After switching on, the TV will
always start on the specified volume level
and channel.
The maximum volume level of the TV can
be limited in order to prevent disturbance
to other guest.
To enter the Professional Setup menu:
•
•
press RC5 Setup
press Home/Menu
•
On a Guest remote:
•
•
Channels can be blanked (Video only).
The TV local buttons VOLUME +/-,
press [3, 1, 9, 7 ,5 , 3,
(MUTE)]
P/CH+/- and
Screen information can be suppressed.
(Home) can be locked.
Note
•
•
SETUP mode should be selected for
hotel installer.
5
Professional mode options
This paragraph describes the functionality of each item in the Professional mode setup menu.
Enter the next layer by pressing [OK], or [>]. Return to a previous level by pressing [<].
Navigate in the current layer by pressing [^], or [v].
Layer 1
Layer 2
Layer 3
Off / On
BDS Mode Setting
BDS Mode
Off / On
Off / On
Off / On
Local Keyboard Locked
Remote Control Locked
OSD Display
[0..60] Slider [50]
[0..60] Slider [60]
[List]
Off / On
On / Standby
Off / On
Switch on volume
Maximum volume
Switch on channel
High security mode
Power on
Display message
When Display Message is On
Welcome Message Line 1
Welcome Message Line 2
Browse USB
Up to 20 characters
Up to 20 characters
Off / On
Home Menu Settings
Feature Settings
Off / On
Auto SCART
Off / On
Off / On
Off / On
Easylink break-in
Easylink control
Auto USB
None, [List]
HDMI 1, 2, Side
Ext 1
Channel settings
Blank channels
Blank extensions
YPbPr
VGA
Store Settings
Smartloader
Smartloader to TV
TV to Smartloader
_______________________
BDS Mode Settings
[OSD display]
Set this function to show or hide screen information.
[BDS mode]
[Off]: Screen information is suppressed.
[On]: Normal screen information is displayed.
Enables / disables the Professional mode.
[On]: All settings in the Professional mode Setup
menu are in effect.
[Switch on volume]
When the guest switches the TV on, it will play at the
specified volume level.
[Off]: The TV operates as a normal (consumer)
TV.
[Local Keyboard lock]
[Maximum volume]
This option specifies the maximum allowable volume
level of the TV.
[Off]: The TV local buttons will function normally.
[On]: The TV local buttons except [POWER] are
locked.
[Switch on channel]
When the guest switches the TV on, it will play at the
specified channel.
[RC lock]
Disables the operation of the Guest remote control.
[Off]: All buttons on Guest remote control will
function normally.
[On]: All buttons on the Guest remote control are
disabled. (It is still possible to enter the
Professional setup menu by pressing [3, 1,
[High security]
[Off]: Professional mode setup menu can be
accessed by both Guest remote control
(Press [3, 1, 9, 7, 5, 3 +
Professional setup remote control )
(MUTE)] )and the
9, 7, 5, 3,
(MUTE)]).
6
[On]: Professional mode setup menu can only be
accessed by the Professional setup remote
control
[Easylink break-in / Easylink control]
Philips Easylink (HDMI-CEC) enables one-touch
play and one touch standby between HDMI-CEC
devices.
[Power on]
The power on function allows the TV to enter a
specific mode ([On], [Standby], or [Last status]) of
operation after the mains power is activated.
[Easylink break-in]
[Off]: Disables HDMI-CEC one touch stand-by
feature in Professional mode.
[On]: When set, the TV will always turn on after
the mains power is activated.
[Standby]: When set, the TV will always turn to
standby after the mains power is activated.
[On]: Enables HDMI-CEC one touch stand-by
feature in Professional mode.
[Easylink control]
[Off]: Disables HDMI-CEC one touch play feature
in Professional mode.
Welcome message
The Welcome message function allows the TV to
show a customized greeting message to the hotel
guest whenever the TV is switched on. This helps to
personalize the hotel experience for guests. The
Welcome message can consist of 2 lines of text, with
each line containing a maximum of 20 alphanumeric
characters. Use Navigation buttons on the remote
control to compose the Welcome message.
[On]: Enables HDMI-CEC one touch play feature
in Professional mode.
[Auto USB]
Enables or disables USB break-in feature in
Professional mode.
[Off]: When USB is plugged in, the [Multimedia]
menu will not appear automatically, but
users can access [Multimedia] menu from
the Guest menu.
Note: Welcome message is always disabled if you select
[BDS Mode Setting] > [OSD display] > [Off.]
[On]: When USB is plugged in, the [Multimedia]
[Display message]:
Selects [On] to activate the welcome message.
Selects [Off] to disable the welcome message.
menu appears automatically.
_______________________
Channel Settings
[Welcome message line 1]:
[Line 1]: Sets the characters of the first line
message.
[Blank channels]
The Blank channels function disables the display of
video on the TV, but does not affect the audio
output. This function can be used for audio
applications (example: music-only channels, and so
on) which do not necessarily require the display of
video.
[Welcome message line 2]:
[Line 2]: Sets the characters of the second line
message.
_______________________
Home Menu Settings
•
Enter [Blank channels], the list of all
channels appear.
Select a channel and press OK to mark. The
channels marked with [X] will not display video
on the TV.
•
[Browse USB]
Enables / disables the USB Browse icon in the
Guest Menu.
•
•
Navigate with [^] and [v]
Exit with [<].
[On]: When set to On, the TV will show the USB
icon in the Home menu.
[Off]: When set to Off, the TV will hide the USB
icon in the Home menu.
[Blank extensions]
The Blank extensions function disables the display of
video on the TV, but does not affect the audio
output. This function can be used for audio
applications (example: music-only channels, and so
on) which do not necessarily require the display of
video.
_______________________
Feature Settings
•
Enter [Blank extensions], the list of all
channels appear.
[Auto scart]
Enables auto scart switching (or break-in) in
Professional mode.
[Off]: Disables auto scart switching or break-in.
[On]: Enables auto scart switching or break-in.
•
Select a channel and press OK to mark. The
channels marked with [X] will not display video
on the TV.
•
•
Navigate with [^] and [v]
Exit with [<].
7
The TV Functionality Set reference to match a
hospitality TV is the following:
______________________
Store Settings
Hospitality Set reference
TV Functionality Set reference
To confirm the changes the settings has to be
stored.
32HFL7406D/10
40HFL7406D/10
32PFL7406H/12
40PFL7406H/12
The TV Functionality Set reference DFU is available via the Philips
Hospitality Website: www.philips.com/hotelTV
select [Store] > [Confirm] to save the changes.
_______________________
After making the proper settings, activate the
Professional Setup Remote Control mode
(press the RC5 Setup button) and pressing
Home/Menu to active the BDS Setup Menu.
Smartloader
Place a USB Memory stick in the side USB
connector
Layer 1
BDS Mode Setting
Store Settings
After this the TV initiates a restart and will switch to Standby.
Layer 2
BDS Mode
[OK]
Layer 3
On
Layer 1
Smartloader
Layer 2
Smartloader to TV
Layer 3
OK
TV will read and store Cloning data from USB stick
Layer 1
Smartloader
Layer 2
TV to Smartloader
Layer 3
OK
TV will store Cloning data to USB stick
Remote Control Alignment
Professional Setup RC
Home [RC6 Guest]
TV RC
2. TV
Functionality
Setup Mode
instruction
To select specific TV functionality settings (i.e.
Channel settings, picture settings .etc) this can be
done in TV Setup Mode only.
To enter the TV Setup mode, it is necessary to
disable the Professional mode. To do this, change
the setting of BDS Mode in the BDS Mode Setting
menu to ‘off’, and store this setting.
Layer 1
BDS Mode Setting
Store Settings
Layer 2
BDS Mode
[OK]
Layer 3
Off
After this the TV initiates a restart and will switch to TV Setup mode.
Now the Professional Setup Remote Control in RC6
Guest mode (press on the Professional Setup RC
the RC6 Guest button) and the TV Remote control
can be used to make the required setting.
The available options are described in the TV
Functionality Set reference DFU.
8
3. Guest
mode
instruction
___________________________
Introduction
When this television is configured as a
professional television, the guest is having no
access to TV functionality that can alter TVs
expected behavior.
The guest will not have access to menus that
can change the channel configuration, nor can
he as example put the TV in a louder audio
level then is permitted in the BDS Mode setting.
This section describes the functionality
available to the guest.
(Home): Accesses the home menu.
The home menu gives you easy
access to connected devices,
picture and sound settings, and
other useful features.
___________________________
Signature Remote Control
The functionality of the Remote Control is
limited, there where the interaction could lead
to an unpredicted behavior of the television for
the next guest.
Therefore it is not possible to store specific
changed settings in the television by the guest.
[Find]:
Accesses the browse menu to
select TV channel list, the
Electronic Program Guide and
teletext.
[Back]:
Returns to a previous menu
screen. Press and hold to return
to watch TV.
*Not supported in MHEG mode.
___________________________
Activate the television
[Options]: Accesses options for the current
activity or selection.
Watch TV and press [Options] will bring up
a menu to select: What’s on, Subtitles,
Audio language, Dual I-II, Status
[Standby]: Switches the TV to standby if it is
on. Switches on the TV if it is in
standby.
[Source]: Key button to select external AV
signals (i.e. HDMI, EXT1, ..)
.
[OK]:
Confirms an entry or selection.
9
|