Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
CEM3000B
EN User manual
•
•
The apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
1 Important
Safety
•
Read and understand all instructions
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
Notice
•
•
•
This apparatus is designed for negative
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume
to a safe and comfortable level.
Improper fuses can cause damage or
fire. When you need to change the fuse,
consult a professional.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
•
•
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuit, do not expose the
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
Clean the apparatus and frame with a
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
•
•
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
•
•
Never place any objects other than discs
into the apparatus.
Never use solvents such as benzene,
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!
Never touch, push, rub or strike the
screen with any object.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod, or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note
that the use of this accessory with iPod, or
iPhone may affect wireless performance.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
•
•
Caution
• Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
4
EN
This apparatus includes this label:
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Recycling
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2010 © Koninklijke Philips Electronics N.V.
All rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
EN
5
i ISO male connectors
j Disassembly tools x 2 pcs
k User manual
2 Your car audio
system
l Quick start guide
m DAB Antenna
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
a
b
Introduction
With the in-car audio system, you can enjoy
your drive while listening to:
c
f
d
e
•
•
•
•
•
•
FM or AM (MW) radio
DAB radio
Audio from CD or MP3 disc
Audio from USB devices
Audio from iPod/iPhone
Audio from other external devices
h
g
The unit supports the following media format:
i
k
l
j
What’s in the box
Check and identify the contents of your package:
a Main unit
b Remote control
c Front panel
d Trim plate
e Carrying case for front panel
f Sleeve
g Rubber cushion
h Screws x 4 pcs
6
EN
Overview of the main unit
a DBB/SUB-W
c BAND/
•
Switch on or off Dynamic Bass Boost
(DBB) sound.
•
•
Select tuner band.
Return to previous menu.
•
Switch on or off subwoofer.
d
/
b
•
•
•
•
Turn the unit on or off.
Confirm selection.
Mute or unmute sound.
Rotate to adjust settings.
•
Unlock the panel.
EN
7
e
f
g
q MENU
•
•
•
Enter iPod/iPhone control mode.
Eject disc.
•
Access system menu.
ꢀ
6281'
r
•
Select MAX Sound audio setting.
s EQ AUDIO
Connector for USB and iPod/iPhone.
•
•
Select equalizer (EQ) setting.
Access audio setting menu.
h MP3 LINK
•
Connect external audio device.
t SOURCE
•
Select audio source.
i OPTIONS/CLOCK
•
•
•
Access option menu.
Display the DAB related information.
View clock.
u RESET
•
Restore default settings.
v Disc slot
j 5+
•
Select or store preset radio stations
1 to 10.
Select or store preset DAB radio
stations 1 to 20.
Overview of the remote
control
•
k SONG/4
i
j
•
•
Search for track.
Select or store preset station 4.
l 3
•
Select or store preset station 3.
h
g
f
e
k
m FOLDER/2
l
m
n
o
•
•
Search for folder.
Select or store preset station 2.
n 1
•
Select or store preset station 1.
d
c
o
•
/
p
q
r
Tune to radio/DAB stations.
Skip/search for tracks.
Fast forward/backward play.
•
b
a
•
s
p DISP/
•
•
•
In FM/DAB/USB mode, press and
hold to select LCD color
In DAB mode , press briefly to
display DAB radio station list
In tuner or iPod/iPhone mode, press
briefly to display station info or iPod/
iPhone info
a PRESET +/-
•
•
Select preset radio station.
Access manual store.
•
In iPod/iPhone mode, press and hold
to access music search mode
b OPTIONS
Access option menu.
•
8
EN
c
r DISP/
•
•
Start play.
•
•
•
In FM/DAB/USB mode, press and
Pause or resume play.
hold to select LCD color
In DAB mode , press briefly to
display DAB radio station list
In tuner or iPod/iPhone mode, press
briefly to display station info or iPod/
iPhone info
d AUDIO
•
Access audio setting menu.
e
/
•
•
•
Tune to radio/DAB station.
Skip track.
Fast backward/forward play.
•
In iPod/iPhone mode, press and hold
to access music search mode
s CLOCK
f OK
•
View clock.
•
Confirm selection.
g MENU
•
Access system menu.
h
/PWR/
Turn the unit on or off.
Mute or restore volume.
•
•
i VOL+/-
•
Adjust volume.
j BAND/
•
•
Select tuner band.
Return to previous/top menu.
k SOURCE
•
•
•
Select audio source.
l
m
Enter iPod/iPhone control mode.
Select MAX Sound audio setting.
Select equalizer (EQ) setting.
ꢀ
6281'
n EQ
•
o DBB
•
Turn on or off Dynamic Bass Boost
(DBB) sound.
p SONG
•
Search for tracks.
q FOLDER
•
Search for folders.
EN
9
3 Get started
Caution
• Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
Place the DAB antenna
Warning
• Make sure the antenna cable does not interfere
with the safe operation of driving wheel, air
bags and seatbelts or other equipment.
Model No. __________________________
Serial No. ___________________________
• Before entering low overhangs, car washes, or
other places with obstacles which may catch
on or touch the antenna, remove the antenna
to avoid potential damage.
• Damage caused by not following the installation
instructions is not covered by warranty.
Install the car audio
Please refer to the “Installation guide” in quick
start guide.
DAB / DAB+Antenna
Attach the front panel
1 Attach the trim plate.
DAB / DAB+Antenna
2 Insert the right side of the panel in the
chassis until it is correctly engaged.
3 Press the left side of the panel until the
mechanism locks it into place.
10 EN
1 Find a location as flat as possible on the
outside of your car. For example, the roof
near the windshield, or rear window.
Note: The magnetic base of the
antenna will remain secure at normal
vehicle speeds in non-windy conditions.
Antennae installed on curved surfaces
may become detached in windy
conditions.
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
2 Make sure the selected surface is
clean and free of dirt, water, or other
substances which could inhibit attachment
to the surface.
3 Gently place the magnetic steel base of
the DAB/DAB+ antenna on the surface
you selected. The magnetic steel base will
stick to any metallic surface.
Note: Damage may be caused to the
paintwork of the car if the antenna slides
or rotates on the car surface.
4 Route the cable: Tuck the cable under
weather strip of the door and run the
cable through the passenger doorway
or tailgate. Reserve enough slack in
your cable to fit open doors or deck
lids. Secure cables to avoid cable being
pinched between hinges and the door.
Turn on
1 Press to turn on the unit.
•
To turn off the unit, press and hold
for a few seconds.
Install remote control battery
Set clock
Caution
1 Press MENU.
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Risk of decreased battery life! Never mix
different brands or types of batteries.
• Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
2 Press
/
repeatedly until [CLK SET]
displays.
3 Rotate to set hour.
4 Press to confirm.
5 Rotate set minute.
6 Press to confirm.
• Perchlorate Material - special handling may
perchlorate.
For first-time use:
EN 11
View clock
4 Listen to radio
1 Press and hold CLOCK until the clock is
displayed.
Tune to a radio station
1 Press SOURCE repeatedly to select radio
mode.
2 Press BAND/ to select band: [FM1],
[FM2], [FM3], [AW1] or [AW2].
3 Press
or
to tune to a radio station
manually.
» The radio station is broadcast.
» To search for a radio station
automatically, press and hold
for a few seconds.
or
Select tuner region
You can select suitable country/region of the
radio.
1 Press SOURCE to select Radio mode.
2 Press MENU.
3 Press
/
repeatedly until [AREA] is
displayed.
4 Rotate to select:
•
•
•
•
•
•
[USA]
[LATIN]
[Europe]
[ASIA]
[M-EAST]
[RUSSIA]
Select tuner sensitivity
To receive more radio stations or only
stations with strong signal, you can adjust the
tuner sensitivity.
1 Press OPTIONS repeatedly to select
[LOCAL SEEK].
2 Rotate to select a setting:
•
[LOCAL SEEK ON]: Only stations
with strong signal can be broadcast.
12 EN
•
[LOCAL SEEK OFF]: Stations with
strong and weak signals can be
broadcast.
Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS
station, an RDS icon and information about the
presenter, station or program is displayed.
Store radio stations in
memory
You can store up to 10 stations in each band.
Turn on RDS
Store stations automatically
Note
1 Press OPTIONS repeatedly until
• The default setting for RDS is on.
[AUTO-STORE] displays.
2 Press to confirm.
1 Press MENU.
» The 10 strongest stations of the
selected band are saved in preset
channel automatically.
2 Press
/
repeatedly until [RDS] is
displayed.
3 Rotate to select option:
•
•
[RDS ON]: The RDS function is on.
[RDS OFF]: The RDS function is off.
Store stations manually
1 Tune to a station that you want to store.
Select program type
Before tuning to RDS stations, you can select
program type and let the unit search only for
programs of the selected category.
2
•
For preset 1 to preset 4, press and
hold button 1 to 4 to store the
corresponding station.
For preset 5 to 10, press and hold
button 5+ and rotate to select a
number (1-10) for the preset.
•
1 Press OPTIONS until [PTY] displays.
2 Press to confirm.
3 Rotate to select a type, then press
3 Press to confirm.
» The station is saved in the selected
channel.
to confirm.
» The preset number lights up on the
LCD screen.
Tune to a preset station
1 Press BAND/ to select band.
2 Press 5+ and rotate to select the preset
number.
3 Press to confirm the selection.
EN 13
Item Program type Description
Select alternate frequencies
If the radio signal is poor, turn on AF
(Alternate Frequency) to search for another
station with stronger signal.
1
2
NEWS
AFFAIRS
News services
Politics and current
affairs
3
INFO
Special information
programs
1 Press OPTIONS.
2 Press
/
repeatedly until [AF] displays.
4
5
SPORT
EDUCATE
Sports
3 Rotate to select a setting:
Education and
advanced training
Radio plays and
literature
Culture, religion and
society
•
•
[AF ON]: Turn on the AF mode.
[AF OFF]: Turn off the AF mode.
6
7
DRAMA
CULTURE
Set region for AF tuning
You can define AF tuning region:
8
9
SCIENCE
VARIED
Science
Entertainment
programs
[REG ON] Only stations in current region
can be tuned to automatically.
[REG OFF] All stations can be tuned to
automatically.
10
11
12
13
14
15
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
Pop music
Rock music
Light music
Light classical music
Classical music
Special music
programs
1 Press MENU.
2 Press
/
repeatedly until [REG]
displays.
3 Rotate to select a setting.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Weather
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Receive traffic announcement
If you do not want to miss traffic
announcement when enjoying music, turn on
the TA (Traffic Announcement) function.
1 Press OPTIONS.
2 Press
/
repeatedly until [TA]
displays.
3 Rotate to select a setting:
•
[TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the traffic conditions.
When the traffic announcement
is over, it returns to the previous
mode.
FOLK M
DOCUMENT Documentary
TEST
ALARM
Alarm Test
Alarm
•
[TA OFF]: Traffic announcement
does not cut in.
14 EN
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
5 Listen to
Digital Audio
Broadcasts
(DAB)
1 Press MENU.
2 Press
/
repeatedly until [CT]
displays.
3 Rotate to select a setting:
•
•
[CT ON]: Turn on the RDS clock.
Digital Audio Broadcasting (DAB), is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality, and more
information.
For the first time when DAB mode is
switched on.
1 Press SOURCE on the main unit
repeatedly to select DAB/DAB+.
» The system performs auto scan.
Time shown on the unit synchronizes
with that on the RDS station.
[CT OFF]: Turn off the RDS clock.
Tip
• The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
» All the available DAB stations are
stored.
» The radio tunes to the first available
station
Tip
• The display shows a rectangle. The position
of the rectangle indicates the degree of signal
strength. (The further towards the right, the
greater the signal strength.)
• If there is no DAB coverage currently available,
or DAB signal is too weak in your area, no
DAB station will be found, and message like
“No Station Found, Scan Again” displays.
Tune to DAB radio station
manually
1 Under DAB mode, press and hold
/
to enter manual seek mode.
» “MANUAL” blinks on LCD screen.
2 Press
/
repeatedly until the the
desired channel/frequency appears.
EN 15
3 Press to confirm.
» The station is saved in the selected
channel.
Scan for new DAB stations
1 Under DAB mode, press MENU
» The preset number is displayed on the
repeatedly until [DAB SCAN] is displayed.
LCD screen.
2 Press to confirm.
» The system scans for all available DAB
radio stations and broadcasts the first
station.
Note
• If a DAB station is already stored under a
preset location, new DAB station assigned to
this location will overwrite the old DAB station.
• DAB station presets will not overwrite FM
presets.
Tip
• New stations and services will be added in the
DAB broadcast. To make new DAB stations
and services available on your car audio, scan
on a regular base.
Tune to a preset station
1 Press 5+ and rotate to select the preset
Store DAB stations
automatically
number.
2 Press to confirm the selection.
1 In DAB mode, press MENU to enter the
Note
menu options.
• If the Scanned/Preset DAB station signal is
not available at particular time/region, [No] is
displayed.
2 Press
/
repeatedly until [DAB
STORE] displays.
3 Press to confirm.
» The 20 strongest stations of the
selected band are saved in preset
channel automatically.
Display DAB information
On the display of DAB broadcasting, the first
line shows station name, and the second line
shows the service information for the current
station. 6 types of service information are
available.
Program DAB radio stations
manually
You can program a maximum of 20 preset DAB
radio stations.
1 Tune to a DAB station.
2 Press OPTIONS/CLOCK repeatedly to
scroll through the display information
(if available).
1 Tune to a DAB station.
2
•
For preset 1 to preset 4, press and
hold button 1 to 4 to store the
corresponding station.
For preset 5 to 10, press and hold
button 5+ and rotate to select a
number (1-20) for the preset.
•
16 EN
•
•
Multiplex name: Displays the name
of the DAB multiplex in which the
current station is broadcast.
Multiplex info: Displays the channel
and frequency of the current DAB
multiplex.
signal is strong, then the audio will
fade in to the original volume level.
[WEAK TO FM]: When the DAB
signal is weak, switch to the last
listened FM station. Switch back to
DAB when signal is strong.
•
•
•
Program type: Describes the content
of the current DAB station.
Scrolling text: Information broadcast
by most DAB stations (may include
song titles, news, etc)
Signal Strength: Displays a meter
illustrating the strength of the DAB
signal 0-100.
DAB Dynamic Range Control
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
•
•
1 In DAB mode, press MENU to enter the
Signal Quality: Display DAB signal
quality, from 0 to 100.
menu options.
2 Press
/
repeatedly until [DAB DRC]
Tip
is displayed.
3 Rotate to select an option.
• If any information above is selected, when
you tune to another DAB station, you can
press OPTIONS/CLOCK once to display the
selected information, no need to scroll through
the list.
•
•
•
[DRC Off]: No compensation
applied. (the default)
[DRC Low]: Medium compensation
applied.
[DRC High]: Maximum compensation
applied.
Weak DAB signal
Note
Select the switch over option when DAB signal
is weak.
• The best way to determine which of these DRC
value settings suits you best is to experiment
with them on various source material.
1 In the DAB mode, press MENU to enter
the menu options.
2 Press
/
repeatedly until [WEAK
DAB] is displayed.
DAB Antenna
3 Rotate to select an option.
1 In DAB mode, press MENU to enter the
•
[WEAK MUTE]: When the DAB
signal is weak, fade out the DAB
audio and mute it until the DAB
menu options.
2 Press
/
repeatedly until DAB antenna
option is displayed.
3 Rotate to select an option.
EN 17
•
•
[ANTENNA OFF]: Select when using
the DAB aerial without the booster.
[ANTENNA 12V]: Select when using
the DAB aerial with the booster (12V).
6 Play audio files
Note
• Ensure that the disc or device contains playable
files.
DAB sorting
With this option, you can select the way that
the station list is arranged.
1 In DAB mode, press MENU to enter the
Play a disc
menu options.
2 Press
/
repeatedly until [DAB
Note
SORTING] is displayed.
3 Rotate to select an option.
• You cannot play CDs encoded with copyright
protection technologies.
•
•
•
[SORT ACTIVE]: Lists active stations
first on the station list.
You can play commercially available audio CDs
and these discs:
[SORT A-Z]: Lists all stations in
alphanumeric order (0-9, A-Z).
[SORT MULTIPLEX]: Lists stations
in groups according to their multiplex
(a group of stations broadcast by the
same operator).
•
•
•
•
CD-Recordables (CD-R)
CD-Rewritables (CD-RW)
MP3 CDs
WMA CDs
You can tune to a DAB station through the
sorted DAB station list.
Note
• Ensure that the disc contains playable content.
1 Under DAB mode, press DISP once to
display the DAB station list.
1 Insert a CD with the printed side facing up.
2 Rotate to scroll through the DAB
» Play starts automatically.
station list in the order set above.
•
•
•
To pause CD play, press
.
3 Press to switch to the selected DAB
To resume CD play, press again.
station.
To skip to the previous/next track, press
or
.
•
To search backward/forward rapidly in
the current track, press and hold
for a few seconds.
or
Remove the CD
To take out the CD, press on the front panel.
Tip
• If the disc is blocked in the disc compartment,
press and hold until the disc comes out.
18 EN
Play from USB
Search for an MP3/WMA
track
Note
Search within the current folder
• Ensure that the USB device contains playable
music.
1 Press SONG.
» The name of the current track is
displayed.
2 Rotate to select another track in
Insert the USB device
current folder
1 Slide the USB connector cover marked
3 Press to confirm.
to the left.
Search in other folder
2 Insert the USB storage device into the
USB connector.
1 Press FOLDER.
» The name of the current folder is
displayed.
» The unit starts playing from the USB
storage device automatically.
2 Rotate to navigate through all folders.
3 Press to access the selected folder.
4 Rotate to select a track in the folder.
5 Press to start play.
Tip
• To go back to upper level of a folder, press
.
View play information
1 During playing, press DISP repeatedly to
view:
•
•
•
•
•
•
Track number and elapsed play time
Artist
Album
Title
Folder
File
Remove the USB device
1 Press to turn off the unit.
2 Remove the USB storage device.
Repeat play
1 During play, press OPTIONS repeatedly
until [REPEAT] is displayed.
2 Rotate to select a setting.
EN 19
•
•
[REPEAT ALL]: Play all tracks repeatedly.
[REPEAT TRK]: Play current track
repeatedly.
[REPEAT FLD]: Play all tracks in the
current folder repeatedly.
Made for.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
iPod nano (2nd generation)
iPod nano (3rd generation, 4GB only)
iPod nano (3rd generation, 8GB only)
iPod nano (4th generation)
iPod nano (5th generation)
iPod classic (1st generation)
iPod classic (2nd generation)
iPod touch (1st generation)
iPod touch (2nd generation)
iPod touch (3rd generation)
iPod video (30GB, 80GB only)
iPhone
•
Shuffle play
You can play the tracks in random order:
1 During play, press OPTIONS repeatedly
until [RANDOM] displays.
2 Rotate to select a setting:
iPhone 3G
•
•
•
[RANDOM OFF]: Turn off random
play.
[RANDOM FLD]: start random play
for all tracks in the current folder.
[RANDOM ALL]: start random play
for all tracks.
iPhone 3GS
iPhone 4
Connect iPod/iPhone
1 Slide the USB connector cover marked
to the left.
Intro play
You can play the first 10 seconds of each track.
2 Insert USB adaptor on one end of iPod/
iPhone cable to the USB connector on
the main unit.
3 Insert the other end of the iPod/iPhone
cable to the iPod/iPhone connector.
» The unit starts playing from the USB
storage device automatically.
1 During play, press OPTIONS repeatedly
until [INTRO] displays.
2 Rotate to select a setting:
•
•
•
[INTRO OFF]: Cancel intro play and
start normal play.
[INTRO FLD]: Start introl play in the
current folder.
[INTRO ALL]: Play the first
10 seconds of each track.
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
20 EN
Control music playback on iPod/
iPhone
Connect external sound
source
1 Make sure that the iPod/iPhone is
1 Connect the external sound source to
MP3 LINK connector with a 3.5 mm
cable.
connected correctly.
2 Press SOURCE to select iPod USB mode.
3 Press repeatedly to toggle between the
2 Press SOURCE repeatedly until [MP3
two control modes:
LINK] is displayed.
•
iPod control mode: Use the buttons/
touch screen on iPod/iPhone to
control the music.
Audio control mode: Use the
control buttons on car audio to
control the music.
3 Operate the external component
(See the instructions supplied with the
external component).
•
To control playback under audio control
mode:
•
•
•
To pause/resume play, press
To skip to a track, press
To search during play, press and
hold , then release to resume
normal play.
To navigate the menu, press
.
/
.
/
•
,
rotate to select, then press to
confirm.
Search for a track on iPod/iPhone
1 Press SOURCE repeatedly to select iPod
mode.
2 Press BAND/ to browse iPod/iPhone
menu.
3 Rotate to select the artist search
mode, and press to confirm.
4 Press DISP/ to search alphabetically.
5 Rotate to select artist, then press to
confirm.
6 Rotate to select song in current album.
7 Press to start play.
Note
• You cannot control the music via iPod/iPhone
under audio control mode.
EN 21
•
•
•
•
•
•
[POP] (pop)
7 Adjust sound
[USER] (user)
[TECHNO] (techno)
[ROCK] (rock)
[CLASSIC] (classic)
[JAZZ] (jazz)
Adjust volume
1 Rotate clockwise/anticlockwise to
increase/decrease volume.
Turn on/off max sound
ꢀ
6281'
1 Press
.
Mute
» The current setting is displayed.
» [MAX ON]:The maximum sound
You can turn off the sound of your audio.
(max sound) function is on.
1 During play, press
.
» [MAX OFF]:The maximum sound
•
To resume sound, press again.
function is off.
Turn DBB and subwoofer
on/off
Other sound settings
You can also change the preset EQ/Audio
settings.
1 Press DBB, then the current setting is
displayed:
» [DBB ON] :The Dynamic Bass Boost
(DBB) function is on.
1 Press EQ/Audio for 3 seconds.
2 Press
/
repeatedly to select the item
» [DBB OFF] :The DBB function is off.
to be adjusted:
•
•
[BASS LEVEL] range: -7 to +7
[BASS CFQ] (bass center frequency)
range: 60, 80, 100, 200.
2 Press DBB again to change the DBB
setting.
3 Press and hold DBB to access subwoofer
•
•
[MIDDLE LEVEL] range:-7 to +7
[MIDDLE CFQ] (middle center
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.
[TREBLE LEVEL] range: -7 to +7
[TREBLE CFQ] (treble center
frequency) range: 10.0k, 12.5k, 15.0k,
17.5k.
settings:
» [SUBWOOFER ON]:The subwoofer
function is on.
•
•
» [SUBWOOFER OFF]:The subwoofer
function is off.
•
•
[BALANCE] range: 12L to 12R.
(L= left speaker, R = right speaker)
[FADER] range: 12R to 12F.
(R = rear speaker, F = front speaker)
[SUBWOOFER] range: 0 to 12.
[RESUME]: Resume the audo setting
value to factory default value.
Select preset equalizer
1 Press EQ/Audio.
•
•
» Current Equalizer setting is displayed.
2 Press EQ/Audio again to select a preset
EQ setting:
3 Rotate to select a value/option.
•
•
[OPTIMAL] (optimal)
[FLAT] (flat)
22 EN
3 Rotate to select a setting:
8 Adjust system
settings
•
[DEMO ON]: Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
•
[DEMO OFF]: Turn off the demo
mode.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn on or off this beep sound.
LCD Color
You can change LCD background color.
1 Press MENU.
2 Press
/
repeatedly until [BEEP] is
1 Press MENU.
displayed.
2 Press
/
repeatedly until [LCD
3 Rotate to select a setting:
COLOR] displays.
•
•
[BEEP ON]: Turn on the beep sound.
[BEEP OFF]: Turn off the beep sound.
3 Rotate to select a setting:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
[DEFAULT] (default setting)
[COLOR SCAN] (color scan)
[WHITE] (white)
[GREEN 1] (green 1)
[GREEN 2] (green 2)
[GREEN 3] (green 3)
[AMBER] (amber)
[PINK 1] (pink 1)
[PINK 2] (pink 2)
[PURPLE 1] (purple 1)
[PURPLE 2] (purple 2)
[BLUE 1] (blue 1)
[BLUE 2] (blue 2)
[USER COLOR] (user color)
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1 Press MENU.
2 Press
/
repeatedly until [BLKOUT]
is displayed.
3 Rotate to select a setting:
•
•
•
[BKO 10 S]: Turn off the screen
automatically 10 seconds after last
operation.
[BKO 20 S]: Turn off the screen
automatically 20 seconds after last
operation.
[BKO OFF]: Never turn off the
screen.
Set user color
1 Press MENU.
2 Press
/
repeatedly until [LCD
COLOR] displays.
3 Press
.
Turn demo mode on/off
1 Press MENU.
4 Rotate to select [USER COLOR].
5 Press to confirm.
6 Rotate to adjust color of the LCD.
2 Press
/
repeatedly until [DEMO] is
R(red)/G(green)/B(blue)
displayed.
7 Press to exit user color setting mode.
EN 23
9 Additional
information
Dimmer
1 Press MENU
2 Press
/
repeatedly until [DIMMER] is
displayed.
3 Rotate to toggle between the settings
Detach the front panel
•
•
[DIMMER Hi]
[DIMMER Lo]
You can detach the front panel to deter theft.
1 Press to release the panel.
2 Push the left side of the panel rightward.
Reset
You can reset the unit to its default setting.
1 Detach the front panel.
2 Press the reset button by using a ball-
point pen or a similar tool.
» Preset adjustments such as preset
channels and sound adjustments are
erased.
3 Pull the panel towards you to disengage it
from the chassis.
4 Store the panel in the supplied carry case
to protect it from dirt or damage.
Replace fuse
If the fuse is damaged,
1 Check the electric connection.
2 Buy a fuse that matches the voltage of the
damaged fuse.
3 Replace the fuse.
24 EN
10 Product
information
Note
• Product information is subject to change
without prior notice.
Power supply
12 V DC (11 V -
16 V), negative
ground
Note
• If the new fuse gets damaged again, there may
be an internal malfunction. Consult your Philips
dealer.
Fuse
15 A
Suitable speaker
impedance
4 - 8
Maximum power output 50 W x 4 channels
Remove the unit
You can remove the unit from the dashboard.
Continuous power
24 W x 4 RMS
output
(4 10% T.H.D.)
Pre-Amp output voltage 2.5 V
1 Detach the front panel.
Subwoofer output
2.0 V
voltage
2 Pull out the unit by using the disassembly
Aux-in level
Dimensions (W x H x D) 188 x 58 x 201 mm
500 mV
tools.
Weight
1.47 kg
Radio
Frequency range - 87.5 - 108.0 MHz
FM (100kHz per step in auto
search and 50kHz per
step in manual search)
Frequency range - 522 - 1620 KHz (9 kHz)
AM(MW) 530 - 1710 kHz (10 kHz)
Usable sensitivity - 8 μV
FM
Usable sensitivity - 30 μV
AM(MW) (S/N =
20 dB)
DABTuner
Frequency range - FM 174 - 240 MHz
Sensitivity
Selectivity
-100dBm(Band III)
40dB
EN 25
Compatible USB storage devices:
11 Troubleshooting
•
USB flash memory: USB 1.1 host with
interface reading all speed support
(1.1, 2.0)
•
USB flash players: USB 1.1 host with
interface reading all speed support
(1.1, 2.0)
Caution
• Never remove the casing of this apparatus.
Supported formats:
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service.
•
•
USB or memory file format: FAT16, FAT32
MP3 bitrate (data rate): 32-320 Kbps and
variable bitrate
WMA V4, V7, V8, V9 (L1, L2)
ISO9660, Joliet
Maximum title number: 512 (depending
on file name length)
•
•
•
No power or no sound.
•
Car engine is not on. Switch on the car
engine.
Cable is not correctly connected. Check
connections.
•
•
Maximum album number: 255
Supported sampling frequencies: 2 kHz,
44.1 kHz, 48 kHz
•
•
•
•
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
If the above solutions cannot help, press
the RESET button.
Make sure that the track played is of a
compatible format.
•
•
•
Supported bitrates: 2~256 (kbps),
variable bitrates
Directory nesting up to a maximum of
8 levels
Number of albums/ folders: CD
maximum 99, USB maximum 199
Number of tracks/titles: maximum 999
ID3 tag v2.0 to v2.4
File name in Unicode UTF8 (maximum
length 64 bytes)
•
Noise in broadcasts.
•
•
•
•
Signals are too weak. Select other
stations with stronger signals.
•
•
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
Unsupported formats:
Cannot play disc
•
Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
•
make sure that the disc label is inserted
with the printed side facing up.
Wipe the disc with fiber cleaning cloth
from the center to the edge in a straight
line.
•
•
•
•
•
This disc may be defective. Play another
disc.
Make sure that the CD is a finalized
CD/CD-R/CD-RW.
Make sure that the CD is not encoded
with copyright protection technologies.
•
•
AAC, WAV, PCM audio files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
WMA files in Lossless format
•
The CD skips tracks
•
Make sure that the CD is not damaged
or dirty.
Make sure that random mode is
deactivated.
•
26 EN
Disc cannot be ejected
Press and hold .
12 Glossary
•
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
Display show ERR-12
•
USB data error. Check the USB storage
device.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools, Windows Media Video encoding
technology, and Windows Media Audio
encoding technology.
EN 27
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CEM3000B_05_UM_V3.1
|