Philips Portable DVD Player PET741/PET741B/PET741C/PET741N/PET741R/PET741V/PET741W
Quick start guide
2
2
1
Enjoy (AV OUT)
Enjoy (Disc operation)
Charge your battery
Connecting additional equipment (TV for
example)
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
1 Connect the AV OUT socket on the set to
the video and audio sockets on a TV as shown
directly.
1 Slide the POWER switch to the OFF position
(charging of the DVD player only possible in the
power-off mode).
2 Switch on the TV and set to the correct video-
in channel.
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio andVideo
inputs, you will need to purchase a RF
modulator. Please consult your dealer.)
2 Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains (or
the car cigarette lighter outlet) to start
charging.
➜ The CHG indicator turns red .
➜ When the battery is fully charged, the
indicator turns off.
1 Open the lid of the player.
2 Slide the POWER switch to ON to switch on
the DVD player.
TV
➜ The
indicator turns on.
Not supplied
White
3 Slide OPEN on the player.
AUDIO IN
4 Remove the protective card (if any) and load a
Red
disc with the label side facing up.
3 Disconnect the power adaptor cord (or the car
Yellow
VIDEO IN
adaptor) when the CHG indicator turns off.
5 Close the disc door.
➜ Playback will start automatically. If not,
press 2;.
Note:
6 To stop playback, press 9.
–You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Note:
During play, you can:
– Press OPTION to select some play options: audio,
subtitle, repeat, and time display.
– Press
directly to adjust brightness of screen
backlight to match lighting conditions.
Printed in China
QSG_37_V2.0
|