Philips MP3 Docking Station DCM5090 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
DCM5090  
EN User manual  
3
21  
DA Brugervejledning  
DE Benutzerhandbuch  
EL Zꢀ'ꢁꢂ!ꢃꢄꢂꢅꢆ'!ꢇ#ꢈ"ꢆ  
FI Käyttöopas  
41  
ꢉꢊ  
87  
FR Mode d’emploi  
IT Manuale utente  
NL Gebruiksaanwijzing  
107  
129  
151  
 
7 Adjust sound  
Adjust volume  
16  
16  
16  
16  
16  
16  
Contents  
Select a preset sound effect  
Enhance bass  
Immerse music over a wider spot  
Mute sound  
1 Important  
Safety  
4
4
5
Notice  
8 Other features  
Set the sleep timer  
17  
17  
17  
17  
2 Your Docking Entertainment System 7  
Introduction  
7
7
8
9
Set the alarm timer  
What’s in the box  
Overview of the main unit  
Overview of the remote control  
Listen to an external device  
9 Product information  
ꢐꢂꢁꢑꢒ\ꢑꢃꢄꢒꢓꢆꢈꢅ  
18  
ꢎꢔ  
19  
19  
3 Get started  
Connect FM antenna  
Connect power  
Prepare the remote control  
Set clock  
10  
10  
11  
11  
11  
12  
USB playability information  
Supported MP3 disc formats  
10 Troubleshooting  
20  
Turn on  
4 Play  
12  
12  
12  
14  
Play from disc  
Play iPod/iPhone/iPad  
Play from USB  
5 Play options  
Pause/resume play  
Stop play  
14  
14  
14  
14  
14  
ꢎꢏ  
15  
15  
Skip to a track  
Search within a track  
ꢀꢁꢂꢁꢃꢄꢅꢃꢆꢇꢅꢈꢉꢊꢋ]ꢁꢅꢂꢌꢃꢍꢅ  
Program tracks  
Display ID3 information  
ꢉꢆ ꢋꢌꢍꢎꢏꢐꢆꢎꢑꢆꢎꢒꢏꢆꢓꢔꢕꢌꢑꢆ  
Tune to a radio station  
Program radio stations  
Select a preset radio station  
Display play information  
15  
15  
15  
16  
16  
EN  
3
 
#ꢅ Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
ꢓꢄꢉꢁꢕꢅꢇꢁꢖꢒꢑꢁꢈꢅꢗꢒꢆꢑꢌꢊꢇꢒꢆꢘꢅꢃꢙꢂꢌꢒ\ꢁꢕꢈꢚꢅꢄꢉꢃꢄꢅ  
produce heat.  
1 Important  
#ꢅ Protect the power cord from being  
walked on or pinched, particularly at  
plugs, convenience receptacles, and the  
point where they exit from the device.  
#ꢅ Only use attachments/accessories  
ꢈꢂꢁꢑꢒ\ꢁꢇꢅ!ꢍꢅꢄꢉꢁꢅꢙꢃꢆꢊꢋꢃꢑꢄꢊꢕꢁꢕ"  
Safety  
#ꢅ Unplug this device during lightning storms  
or when unused for long periods of time.  
#ꢅ ꢀꢁꢋꢁꢕꢅꢃꢌꢌꢅꢈꢁꢕꢖꢒꢑꢒꢆꢘꢅꢄꢓꢅ#ꢊꢃꢌꢒ\ꢁꢇꢅꢈꢁꢕꢖꢒꢑꢁꢅ  
personnel. Servicing is required when the  
device has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have  
fallen into the device, the device has been  
exposed to rain or moisture, does not  
operate normally, or has been dropped.  
#ꢅ Battery usage CAUTION – To prevent  
battery leakage which may result in bodily  
injury, property damage, or damage to  
the unit:  
This ‘bolt of lightning’ indicates uninsulated  
material within your unit may cause an  
electrical shock. For the safety of everyone  
in your household, please do not remove  
product covering.  
The ‘exclamation mark’ draws attention  
to features for which you should read  
the enclosed literature closely to prevent  
operational and maintenance problems.  
)*ꢀ;<;=>ꢅ?ꢓꢅꢕꢁꢇꢊꢑꢁꢅꢄꢉꢁꢅꢕꢒꢈ$ꢅꢓꢋꢅ\ꢕꢁꢅꢓꢕꢅ  
electric shock, this device should not be  
ꢁ&ꢂꢓꢈꢁꢇꢅꢄꢓꢅꢕꢃꢒꢆꢅꢓꢕꢅꢉꢊꢙꢒꢇꢒꢄꢍꢅꢃꢆꢇꢅꢓ!'ꢁꢑꢄꢈꢅ\ꢌꢌꢁꢇꢅ  
with liquids, such as vases, should not be  
placed on this device.  
#ꢅ Install all batteries correctly, + and -  
as marked on the unit.  
#ꢅ Do not mix batteries (old and new  
ꢓꢕꢅꢑꢃꢕ!ꢓꢆꢅꢃꢆꢇꢅꢃꢌ$ꢃꢌꢒꢆꢁ%ꢅꢁꢄꢑ"ꢚ"  
#ꢅ Remove batteries when the unit is  
not used for a long time.  
#ꢅ Batteries (battery pack or batteries  
ꢒꢆꢈꢄꢃꢌꢌꢁꢇꢚꢅꢈꢉꢃꢌꢌꢅꢆꢓꢄꢅ!ꢁꢅꢁ&ꢂꢓꢈꢁꢇꢅꢄꢓꢅ  
ꢁ&ꢑꢁꢈꢈꢒꢖꢁꢅꢉꢁꢃꢄꢅꢈꢊꢑꢉꢅꢃꢈꢅꢈꢊꢆꢈꢉꢒꢆꢁ%ꢅ\ꢕꢁꢅ  
or the like.  
CAUTION: To prevent electric shock, match  
wide blade of plug to wide slot, fully insert.  
#ꢅ Devices shall not be exposed to dripping  
or splashing.  
Important Safety Instructions  
#ꢅ Do not place any sources of danger on  
ꢄꢉꢁꢅꢇꢁꢖꢒꢑꢁꢅꢗꢁ"ꢘ"ꢅꢌꢒ#ꢊꢒꢇꢅ\ꢌꢌꢁꢇꢅꢓ!'ꢁꢑꢄꢈ%ꢅꢌꢒꢘꢉꢄꢁꢇꢅ  
ꢑꢃꢆꢇꢌꢁꢈꢚ"ꢅ  
#ꢅ Where the MAINS plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
#ꢅ Read these instructions.  
#ꢅ Heed all warnings.  
#ꢅ Follow all instructions.  
#ꢅ Do not use this device near water.  
#ꢅ Clean only with dry cloth.  
#ꢅ Do not block any ventilation openings.  
Install in accordance with the  
manufacturer’s instructions.  
4
EN  
 
Warning  
# Never remove the casing of this device.  
# Never lubricate any part of this device.  
# Never place this device on other electrical  
equipment.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
# Keep this device away from direct sunlight,  
ꢆꢃ$ꢁꢇꢅ]ꢃꢙꢁꢈꢅꢓꢕꢅꢉꢁꢃꢄ"ꢅ  
# Never look into the laser beam inside this  
device.  
# Ensure that you always have easy access to the  
power cord, plug or adapter to disconnect this  
device from the power.  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European Directive  
2002/96/EC.  
Mains fuse  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment  
and human health.  
This information applies only to products with  
a UK mains plug.  
?ꢉꢒꢈꢅꢂꢕꢓꢇꢊꢑꢄꢅꢒꢈꢅ\ꢄꢄꢁꢇꢅ@ꢒꢄꢉꢅꢃꢆꢅꢃꢂꢂꢕꢓꢖꢁꢇꢅ  
molded plug. If you replace the fuse, use one  
with:  
#ꢅ the ratings shown on the plug,  
#ꢅ a BS 1362 approval, and  
#ꢅ the ASTA approval mark.  
Contact your dealer if you are not sure about  
what type of fuse to use.  
Caution: To conform with the EMC directive  
ꢗGJJꢏQꢎJꢔQVXꢚ%ꢅꢇꢓꢅꢆꢓꢄꢅꢇꢁꢄꢃꢑꢉꢅꢄꢉꢁꢅꢂꢌꢊꢘꢅꢋꢕꢓꢙꢅ  
the power cord.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste. Please inform yourself about the local  
rules on separate collection of batteries  
because correct disposal helps to prevent  
negative consequences for environmental and  
human health.  
Notice  
*ꢆꢍꢅꢑꢉꢃꢆꢘꢁꢈꢅꢓꢕꢅꢙꢓꢇꢒ\ꢑꢃꢄꢒꢓꢆꢈꢅꢙꢃꢇꢁꢅꢄꢓꢅꢄꢉꢒꢈꢅ  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
ꢈꢁꢂꢃꢕꢃꢄꢁꢅꢒꢆꢄꢓꢅꢄꢉꢕꢁꢁꢅꢙꢃꢄꢁꢕꢒꢃꢌꢈ>ꢅꢑꢃꢕꢇ!ꢓꢃꢕꢇꢅꢗ!ꢓ&ꢚ%ꢅ  
ꢂꢓꢌꢍꢈꢄꢍꢕꢁꢆꢁꢅꢋꢓꢃꢙꢅꢗ!ꢊꢋꢋꢁꢕꢚꢅꢃꢆꢇꢅꢂꢓꢌꢍꢁꢄꢉꢍꢌꢁꢆꢁꢅ  
ꢗ!ꢃꢘꢈ%ꢅꢂꢕꢓꢄꢁꢑꢄꢒꢖꢁꢅꢋꢓꢃꢙꢅꢈꢉꢁꢁꢄ"ꢚꢅ  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
EN  
5
 
Note  
# The type plate is located on the back of the  
unit.  
The making of unauthorized copies of  
copy-protected material, including computer  
ꢂꢕꢓꢘꢕꢃꢙꢈ%ꢅ\ꢌꢁꢈ%ꢅ!ꢕꢓꢃꢇꢑꢃꢈꢄꢈꢅꢃꢆꢇꢅꢈꢓꢊꢆꢇꢅ  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
Norge  
?ꢂꢁꢈ$ꢒꢌꢄꢅ\ꢆꢆꢁꢈꢅꢂꢛꢅꢃꢂꢂꢃꢕꢃꢄꢁꢆꢈꢅꢊꢆꢇꢁꢕꢈꢒꢇꢁ"  
Observer: Nettbryteren er sekundert  
innkoplet. Den innebygde netdelen er derfor  
ꢒ$$ꢁꢅꢋꢕꢃ$ꢓꢂꢌꢁꢄꢅꢆꢁꢄꢄꢁꢄꢅꢈꢛꢅꢌꢁꢆꢘꢁꢅꢃꢂꢂꢃꢕꢃꢄꢁꢄꢅꢁꢕꢅ  
tilsluttet nettkontakten.  
[ꢓꢕꢅꢛꢅꢕꢁꢇꢊꢈꢁꢕꢁꢅꢋꢃꢕꢁꢆꢅꢋꢓꢕꢅ!ꢕꢃꢆꢆꢅꢁꢌꢌꢁꢕꢅꢁꢌꢁ$ꢄꢕꢒꢈ$ꢅ  
støt, skal apparatet ikke utsettes for regn eller  
fuktighet.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
“Made for iPod,” “Made for iPhone,” and  
“Made for iPad” mean that an electronic  
accessory has been designed to connect  
ꢈꢂꢁꢑꢒ\ꢑꢃꢌꢌꢍꢅꢄꢓꢅꢒ\ꢓꢇ%ꢅꢒ\ꢉꢓꢆꢁ%ꢅꢓꢕꢅꢒ\ꢃꢇ%ꢅ  
ꢕꢁꢈꢂꢁꢑꢄꢒꢖꢁꢌꢍ%ꢅꢃꢆꢇꢅꢉꢃꢈꢅ!ꢁꢁꢆꢅꢑꢁꢕꢄꢒ\ꢁꢇꢅ!ꢍꢅꢄꢉꢁꢅ  
developer to meet Apple performance  
standards. Apple is not responsible for the  
operation of this device or its compliance  
with safety and regulatory standards. Please  
note that the use of this accessory with  
iPod, iPhone, or iPad may affect wireless  
performance.  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries. iPad  
is a trademark of Apple Inc.  
This device includes this label:  
6
EN  
 
2 Your Docking  
Entertainment  
System  
What’s in the box  
Check and identify the contents of your  
package:  
#ꢅ Main unit  
#ꢅ Remote control with two AAA batteries  
#ꢅ Gꢅ&ꢅꢂꢓ@ꢁꢕꢅꢑꢓꢕꢇꢈꢅꢗꢋꢓꢕꢅV]ꢅꢃꢆꢇꢅ]^ꢚ  
#ꢅ MP3 link cable  
Congratulations on your purchase, and  
@ꢁꢌꢑꢓꢙꢁꢅꢄꢓꢅ\ꢉꢒꢌꢒꢂꢈ`?ꢅꢋꢊꢌꢌꢍꢅ!ꢁꢆꢁ\ꢄꢅꢋꢕꢓꢙꢅꢄꢉꢁꢅ  
support that Philips offers, register your product  
#ꢅ FM antenna  
#ꢅ User manual  
#ꢅ Quick start guide  
Introduction  
With this unit, you can:  
#ꢅ enjoy audio from discs, USB devices,  
iPod/iPhone/iPad, and other external  
devices  
#ꢅ listen to radio stations  
You can enrich sound output with these sound  
effects:  
#ꢅ {ꢍꢆꢃꢙꢒꢑꢅ|ꢃꢈꢈꢅ|ꢓꢓꢈꢄꢅꢗ{||ꢚ  
#ꢅ {ꢒꢘꢒꢄꢃꢌꢅꢐꢓꢊꢆꢇꢅXꢓꢆꢄꢕꢓꢌꢅꢗ{ꢐXꢚ  
#ꢅ Living Sound  
The unit supports the following media  
formats:  
EN  
7
 
Overview of the main unit  
a
b
c
d
p
o
e
f
g
n
m
h
i
l
k
j
a DOCK  
gꢆ ꢖꢗꢘꢆ!"ꢋ  
#ꢅ Adjust subwoofer volume.  
#ꢅ Dock for iPod/iPhone/iPad.  
b
h Display panel  
#ꢅ Show current status.  
#ꢅ Start or pause play.  
cꢆ $+-ꢖ-6ꢆ()*  
i Disc compartment  
#ꢅ Select a preset radio station.  
#ꢅ Skip to the previous/next album.  
j
#ꢅ USB socket.  
d SRC  
#ꢅ Select a source: CD, FM TUNER,  
iPod/iPhone/iPad, USB, or MP3  
LINK.  
k#$ꢊꢆꢋ%&'  
#ꢅ Connect an external audio device.  
lꢆ $ꢗꢋꢋ  
e
#ꢅ Pull to open the protective panel.  
#ꢅ Turn the unit on.  
#ꢅ Switch to standby mode or Eco  
power standby mode.  
m
#ꢅ Eject the disc.  
n!"ꢋꢆ()*  
f PROG  
#ꢅ Adjust volume.  
#ꢅ Program tracks.  
#ꢅ Program radio stations.  
#ꢅ Set the clock.  
8
EN  
 
o
p
/
a
#ꢅ Skip to the previous/next track.  
#ꢅ Search within a track/disc.  
#ꢅ Tune to a radio station.  
#ꢅ Set clock and timer.  
#ꢅ Turn the unit on.  
#ꢅ Switch to standby mode or Eco  
power standby mode.  
b EJECT  
#ꢅ Eject the disc.  
#ꢅ Stop play or erase a program.  
c CD/ID3  
#ꢅ Select CD source.  
#ꢅ Display ID3 information.  
Overview of the remote  
control  
d
e
/OK  
#ꢅ Start or pause play.  
#ꢅ Xꢓꢆ\ꢕꢙꢅꢃꢅꢈꢁꢌꢁꢑꢄꢒꢓꢆ"  
/
a
#ꢅ Skip to the previous/next track.  
#ꢅ Search within a track/disc.  
#ꢅ Tune to a radio station.  
#ꢅ Set clock and timer.  
b
c
s
f#$ꢊꢆꢋ%&')ꢗꢖꢘ  
#ꢅ Select MP3 LINK or USB source.  
d
e
g Menu/  
#ꢅ Access the iPod/iPhone/iPad menu.  
#ꢅ Stop play or erase a program.  
r
q
h
f
g
h
#ꢅ Mute or restore sound.  
i!"ꢋꢆ()*  
p
#ꢅ Adjust volume.  
i
j Numeric keypad  
#ꢅ Select a track.  
#ꢅ Select a preset radio station.  
kꢆ $+";)<ꢋ"<'ꢆꢖ-6  
#ꢅ Program tracks.  
j
k
#ꢅ Program radio stations.  
#ꢅ Set the clock.  
o
n
lꢆ ꢖꢋ--$)6%#-+  
l
m
#ꢅ Set the sleep timer.  
#ꢅ Set the alarm timer.  
m DSC  
#ꢅ Select a preset sound setting.  
EN  
9
 
n DBB  
3 Get started  
#ꢅ ?ꢊꢕꢆꢅꢄꢉꢁꢅ{ꢍꢆꢃꢙꢒꢑꢅ|ꢃꢈꢈꢅ|ꢓꢓꢈꢄꢅꢗ{||ꢚꢅ  
on/off.  
oꢆ +-$-=6)ꢖ>ꢗ??ꢋ-  
Caution  
#ꢅ ꢐꢁꢌꢁꢑꢄꢅꢕꢁꢂꢁꢃꢄQꢈꢉꢊꢋ]ꢁꢅꢂꢌꢃꢍꢅꢙꢓꢇꢁ"  
# Use of controls, or adjustments or  
performance of procedures other than herein  
may result in hazardous radiation exposure or  
other unsafe operation.  
pꢆ ꢋꢌ@ꢌꢐHꢆꢖꢑLꢐꢕ  
#ꢅ Turn the Living Sound effect on/off.  
q DOCK  
#ꢅ Select iPod/iPhone/iPad source.  
Always follow the instructions in this chapter in  
sequence.  
rꢆ $+-ꢖ-6)=ꢋꢘꢗ#ꢆ  
/
If you contact Philips, you will be asked for the  
model and serial number of this device.The  
model number and serial number are on the  
back of the device.Write the numbers here:  
Model No. __________________________  
Serial No. ___________________________  
#ꢅ Select a preset radio station.  
#ꢅ Skip to previous/next album.  
#ꢅ Navigate through the iPod/iPhone/  
iPad menu.  
s TUNER/RDS  
#ꢅ Select FM source.  
#ꢅ {ꢒꢈꢂꢌꢃꢍꢅꢀꢃꢇꢒꢓꢅ{ꢃꢄꢃꢅꢐꢍꢈꢄꢁꢙꢅꢗꢀ{ꢐꢚꢅ  
information.  
Connect FM antenna  
Tip  
# For optimal reception, fully extend and adjust  
the position of the antenna.  
Connect the supplied FM antenna to the FM  
=-+%=ꢋ jack on the back of the main unit.  
10 EN  
 
2 Insert 2 AAA batteries with correct  
Connect power  
ꢂꢓꢌꢃꢕꢒꢄꢍꢅꢗ~Qꢚꢅꢃꢈꢅꢒꢆꢇꢒꢑꢃꢄꢁꢇ"  
3 Close the battery compartment.  
Caution  
# Risk of product damage! Ensure that the  
power supply voltage corresponds to the  
voltage printed on the back or the underside  
of the unit.  
a
# Risk of electric shock! When you unplug the  
AC power cord, always pull the plug from the  
socket. Never pull the cord.  
# Before connecting the AC power cord, ensure  
you have completed all other connections.  
b
Connect the power cord to:  
#ꢅ the AC~MAINS jack on the back of the  
main unit.  
#ꢅ the wall outlet.  
c
Note  
# If you are not going to use the remote control  
for a long time, remove the batteries.  
# Do not use old and new or different types of  
batteries in combination.  
# Batteries contain chemical substances, so they  
should be disposed of properly.  
Set clock  
1 In standby mode, press and hold PROG/  
<ꢋ"<'ꢆꢖ-6 for more than two seconds  
to activate the clock setting mode.  
» The 12 hour or 24 hour format is  
displayed.  
Prepare the remote control  
Caution  
# Risk of explosion! Keep batteries away from  
ꢉꢁꢃꢄ%ꢅꢈꢊꢆꢈꢉꢒꢆꢁ%ꢅꢓꢕꢅ\ꢕꢁ"ꢅ;ꢁꢖꢁꢕꢅꢇꢒꢈꢑꢃꢕꢇꢅ!ꢃꢄꢄꢁꢕꢒꢁꢈꢅ  
ꢒꢆꢅ\ꢕꢁ"  
2 Press  
/
to select 12 hour or 24  
hour format, and then press PROG/  
<ꢋ"<'ꢆꢖ-6.  
To insert the remote control battery:  
1 Open the battery compartment.  
» The hour digits are displayed and begin  
to blink.  
EN 11  
 
3 Press  
/
to set the hour, and then  
4 Play  
press $+";)<ꢋ"<'ꢆꢖ-6.  
» The minute digits are displayed and  
begin to blink.  
Play from disc  
4 Press  
/
to set the minute.  
5 Press $+";)<ꢋ"<'ꢆꢖ-6ꢅꢄꢓꢅꢑꢓꢆ\ꢕꢙ"  
1 Press CD on the remote control or press  
SRC repeatedly on the main unit to select  
CD source.  
2 Insert a disc into the disc compartment  
Turn on  
with the printed side facing right.  
» ?ꢉꢁꢅ\ꢌꢁꢅꢈꢄꢃꢕꢄꢈꢅꢂꢌꢃꢍꢒꢆꢘꢅꢃꢊꢄꢓꢙꢃꢄꢒꢑꢃꢌꢌ"ꢅ<ꢋꢅ  
Press .  
not, press  
.
» The unit switches to the last selected  
source.  
#ꢅ Press EJECT to take the disc out of  
the disc tray.  
Switch to standby  
Press again to switch the unit to standby  
mode.  
» The backlight on the display panel is  
reduced.  
» ?ꢉꢁꢅꢑꢌꢓꢑ$ꢅꢗꢒꢋꢅꢈꢁꢄꢚꢅꢃꢂꢂꢁꢃꢕꢈꢅꢓꢆꢅꢄꢉꢁꢅꢇꢒꢈꢂꢌꢃꢍꢅ  
panel.  
To switch to Eco power standby mode:  
Press and hold for more than two seconds.  
» The backlight on the display panel turns off.  
To switch between normal standby mode  
and Eco power standby mode:  
Press and hold for more than two seconds.  
Note  
# If no button is pressed over 15 minutes in  
standby mode, this device goes to Eco power  
standby mode automatically.  
Play iPod/iPhone/iPad  
You can enjoy audio from iPod/iPhone/iPad  
through this docking system.  
Compatible iPod/iPhone/iPad  
The unit supports the following iPod/iPhone/  
iPad models.  
Made for  
#ꢅ iPad 2  
12 EN  
 
#ꢅ iPad  
» The audio in connected iPod/iPhone/  
#ꢅ iPhone 4  
iPad streams from this docking system  
#ꢅ iPhone 3GS  
automatically. If not, press  
.
#ꢅ iPhone 3G  
#ꢅ To navigate the menu: press MENU,  
#ꢅ iPhone  
and press  
/
/
/
to select,  
#ꢅ iPod classic  
and then press OKꢅꢄꢓꢅꢑꢓꢆ\ꢕꢙ"  
#ꢅ iPod with video  
#ꢅ iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th  
ꢘꢁꢆꢁꢕꢃꢄꢒꢓꢆꢚ  
Charge the iPod/iPhone/iPad  
#ꢅ iPod touch (1st, 2nd, 3rd, and 4th  
ꢘꢁꢆꢁꢕꢃꢄꢒꢓꢆꢚ  
When the unit is connected to power, the  
docked iPod/iPhone/iPad begins to charge  
automatically.  
ꢋꢑꢔꢕꢆꢎꢒꢏꢆꢌ$ꢑꢕ)ꢌ$ꢒꢑꢐꢏ)ꢌ$ꢔꢕ  
Place the iPod/iPhone/iPad in the dock.  
Note  
# iPod with color display, iPod classic, and iPod  
with video are not compatible with dock  
charging.  
Remove the iPod/iPhone/iPad  
Pull the iPod/iPhone/iPad out of the dock.  
ꢋꢌꢍꢎꢏꢐꢆꢎꢑꢆꢎꢒꢏꢆꢌ$ꢑꢕ)ꢌ$ꢒꢑꢐꢏ)ꢌ$ꢔꢕ  
Note  
# Make sure that your iPod/iPhone/iPad has  
been loaded securely.  
1 Press DOCK on the remote control or  
press SRC repeatedly on the main unit to  
select iPod/iPhone/iPad source.  
2 Play audio on your iPod/iPhone/iPad.  
EN 13  
 
5 Play options  
Play from USB  
Note  
Pause/resume play  
# Ensure that the USB device contains playable  
audio content.  
During play, press  
to pause/resume play.  
1 Press USB on the remote control or  
press SRC repeatedly on the main unit to  
select the USB source.  
Stop play  
2 Insert the USB device into the ꢅꢗ]ꢐ|ꢚꢅ  
During play, press to stop play.  
socket on the back of the unit.  
» ?ꢉꢁꢅ\ꢌꢁꢅꢈꢄꢃꢕꢄꢈꢅꢂꢌꢃꢍꢒꢆꢘꢅꢃꢊꢄꢓꢙꢃꢄꢒꢑꢃꢌꢌ"ꢅ<ꢋꢅ  
not, press  
.
Skip to a track  
For CD:  
1 Press  
/
to select another track.  
#ꢅ To select a track directly, press a key  
on the numerical keypad.  
For MP3 disc and USB:  
1 Press  
/
to select an album or folder.  
ꢅꢄꢓꢅꢈꢁꢌꢁꢑꢄꢅꢃꢅꢄꢕꢃꢑ$ꢅꢓꢕꢅ\ꢌꢁ"  
2 Press  
/
Search within a track  
1 During play, press and hold  
/
to  
search within a track.  
2 Release to resume normal play.  
+ꢏQꢏꢔꢎꢆꢔꢐꢕꢆꢍꢒLV]ꢏꢆQZꢔ[  
1 During play, press +-$-=6)ꢖ>ꢗ??ꢋ-  
repeatedly to select:  
#ꢅ  
#ꢅ  
#ꢅ  
ꢅꢗꢕꢁꢂꢁꢃꢄꢅꢓꢆꢁꢚ>ꢅ?ꢉꢁꢅꢑꢊꢕꢕꢁꢆꢄꢅꢄꢕꢃꢑ$ꢅꢒꢈꢅ  
played repeatedly.  
ꢅꢗꢕꢁꢂꢁꢃꢄꢅꢃꢌꢌꢚ>ꢅ*ꢌꢌꢅꢄꢕꢃꢑ$ꢈꢅꢃꢕꢁꢅ  
played repeatedly.  
ꢅꢗꢈꢉꢊꢋ]ꢁꢚ>ꢅ*ꢌꢌꢅꢄꢕꢃꢑ$ꢈꢅꢃꢕꢁꢅꢂꢌꢃꢍꢁꢇꢅꢒꢆꢅ  
a random sequence.  
14 EN  
 
2 To return to normal play, press REPEAT/  
ꢖ>ꢗ??ꢋ-ꢅꢕꢁꢂꢁꢃꢄꢁꢇꢌꢍꢅꢊꢆꢄꢒꢌꢅꢕꢁꢂꢁꢃꢄQꢈꢉꢊꢋ]ꢁꢅ  
mode is no longer displayed.  
ꢉꢆ ꢋꢌꢍꢎꢏꢐꢆꢎꢑꢆꢎꢒꢏꢆ  
radio  
Note  
# ?ꢉꢁꢅꢕꢁꢂꢁꢃꢄꢅꢃꢆꢇꢅꢈꢉꢊꢋ]ꢁꢅꢂꢌꢃꢍꢅꢑꢃꢆꢆꢓꢄꢅ!ꢁꢅ  
activated at the same time.  
Tune to a radio station  
# ꢐꢉꢊꢋ]ꢁꢅꢂꢌꢃꢍꢅꢑꢃꢆꢆꢓꢄꢅ!ꢁꢅꢈꢁꢌꢁꢑꢄꢁꢇꢅ@ꢉꢁꢆꢅꢍꢓꢊꢅꢂꢌꢃꢍꢅ  
programmed tracks.  
Tip  
# For optimal FM reception, fully extend and  
adjust the position of the FM antenna.  
Program tracks  
1 Press TUNER on the remote control or  
press SRC repeatedly on the main unit to  
select the tuner source.  
You can program a maximum of 20 tracks.  
1 In CD/USB mode, at the stop position,  
press PROG to activate the program  
mode.  
2 Press and hold  
/
for more than  
two seconds.  
» [SEARCH]ꢅꢗꢈꢁꢃꢕꢑꢉꢚꢅꢒꢈꢅꢇꢒꢈꢂꢌꢃꢍꢁꢇ"  
» [PROG]ꢅꢗꢂꢕꢓꢘꢕꢃꢙꢚꢅ!ꢌꢒꢆ$ꢈꢅꢓꢆꢅꢄꢉꢁꢅ  
display.  
» The radio tunes to a station with  
strong reception automatically.  
2 For MP3/WMA tracks, press  
/
to  
select an album.  
3 Repeat step 2 to tune to more stations.  
#ꢅ To tune to a weak station, press  
/
3 Press  
/
to select a track number,  
ꢅꢕꢁꢂꢁꢃꢄꢁꢇꢌꢍꢅꢊꢆꢄꢒꢌꢅꢍꢓꢊꢅ\ꢆꢇꢅꢓꢂꢄꢒꢙꢃꢌꢅ  
reception.  
and then press PROGꢅꢄꢓꢅꢑꢓꢆ\ꢕꢙ"  
4 Repeat steps 2 to 3 to program more  
tracks.  
5 Press  
to play the programmed tracks.  
Program radio stations  
» During play, [PROG]ꢅꢗꢂꢕꢓꢘꢕꢃꢙꢚꢅꢒꢈꢅ  
displayed.  
Tip  
#ꢅ To erase the program, in the stop  
position, press  
.
# You can program a maximum of 20 preset  
radio stations.  
Display ID3 information  
Program radio stations automatically  
In CD mode, during play, press ID3 to display  
the following information:  
#ꢅ Track number  
In tuner mode, press and hold PROG for  
more than two seconds to activate automatic  
program mode.  
#ꢅ Play time  
» [AUTO SRCHƒꢗꢃꢊꢄꢓꢅꢈꢁꢃꢕꢑꢉꢚꢅꢒꢈꢅꢇꢒꢈꢂꢌꢃꢍꢁꢇ"  
#ꢅ Title name  
» All available stations are programmed in  
#ꢅ Artist name  
the order of waveband reception strength.  
#ꢅ Album name  
» ?ꢉꢁꢅ\ꢕꢈꢄꢅꢂꢕꢓꢘꢕꢃꢙꢙꢁꢇꢅꢕꢃꢇꢒꢓꢅꢈꢄꢃꢄꢒꢓꢆꢅꢒꢈꢅ  
broadcast automatically.  
EN 15  
 
Program radio stations manually  
7 Adjust sound  
1 Tune to a radio station.  
2 Press PROG to activate program mode.  
» [PROG]ꢅꢗꢂꢕꢓꢘꢕꢃꢙꢚꢅ!ꢌꢒꢆ$ꢈꢅꢓꢆꢅꢄꢉꢁꢅ  
display.  
Adjust volume  
During play, press !"ꢋꢆ()* to increase/decrease  
3 Press  
/
to allocate a number (1 to  
the volume.  
GJꢚꢅꢄꢓꢅꢄꢉꢒꢈꢅꢕꢃꢇꢒꢓꢅꢈꢄꢃꢄꢒꢓꢆ%ꢅꢃꢆꢇꢅꢄꢉꢁꢆꢅꢂꢕꢁꢈꢈꢅ  
PROGꢅꢄꢓꢅꢑꢓꢆ\ꢕꢙ"  
» The preset number and the frequency  
of the preset station are displayed.  
Adjust subwoofer volume  
During play, press ꢖꢗꢘꢆ!"on the main unit  
to increase/decrease the subwoofer volume.  
4 Repeat the above steps to program other  
stations.  
Note  
Select a preset sound effect  
# To overwrite a programmed station, store  
another station in its place.  
During play, press DSC repeatedly to select:  
#ꢅ _?ꢋ=6`ꢅꢗ]ꢃꢄꢚ  
#ꢅ [ROCK]ꢅꢗꢕꢓꢑ$ꢚ  
#ꢅ _<ꢋ=ꢖꢖ%<`ꢅꢗꢑꢌꢃꢈꢈꢒꢑꢚ  
#ꢅ [JAZZ]ꢅꢗ'ꢃ„„ꢚ  
Select a preset radio station  
#ꢅ [POP]ꢅꢗꢂꢓꢂꢚ  
In tuner mode, press  
number.  
/
to select a preset  
#ꢅ You can also press the numeric key to  
select a preset number directly.  
Enhance bass  
During play, press DBB to turn on or off  
dynamic bass enhancement.  
» If DBB is activated, DBB feature is enabled.  
Display play information  
ꢀꢃꢇꢒꢓꢅ{ꢃꢄꢃꢅꢐꢍꢈꢄꢁꢙꢅꢗꢀ{ꢐꢚꢅꢒꢈꢅꢃꢅꢈꢁꢕꢖꢒꢑꢁꢅ  
that allows FM stations to show additional  
information.  
In tuner mode, press TUNER/RDS repeatedly  
to show RDS information.  
Immerse music over a wider  
spot  
During play, press ꢋꢌ@ꢌꢐHꢆꢖꢑLꢐꢕ to turn on or  
off the living sound effect.  
» If Living Sound is activated,  
is  
displayed.  
Mute sound  
During play, press to mute or restore sound.  
16 EN  
 
Press ꢖꢋ--$)6%#-+ꢅꢄꢓꢅꢑꢓꢆ\ꢕꢙ"  
8 Other features  
» The alarm timer is set and activated.  
Activate and deactivate the alarm  
timer  
Set the sleep timer  
This docking system can switch to standby  
automatically after a set period of time.  
1 When the unit is turned on, press ꢖꢋ--$)  
TIMER repeatedly to select a set period  
ꢓꢋꢅꢄꢒꢙꢁꢅꢗꢒꢆꢅꢙꢒꢆꢊꢄꢁꢈꢚ"  
In standby mode, press ꢖꢋ--$)6%#-+  
repeatedly to activate or deactivate the alarm  
timer.  
» If the alarm timer is activated, is displayed  
» If the alarm timer is deactivated,  
» When sleep timer is activated, is  
displayed.  
disappears.  
Note  
To deactivate sleep timer  
1 Press ꢖꢋ--$)6%#-+ repeatedly until  
[ꢖꢋ--$ꢆ"??ƒꢅꢗꢈꢌꢁꢁꢂꢅꢓꢋꢋꢚꢅꢒꢈꢅꢇꢒꢈꢂꢌꢃꢍꢁꢇ"  
» When sleep timer is deactivated,  
disappears.  
# If CD/USB/iPod/iPhone/iPad source is selected,  
but no disc is placed or no USB/iPod/iPhone/  
iPad is connected, the FM TUNER is selected  
automatically.  
ꢋꢌꢍꢎꢏꢐꢆꢎꢑꢆꢔꢐꢆꢏ{ꢎꢏꢓꢐꢔZꢆꢕꢏ@ꢌ|ꢏ  
Set the alarm timer  
You can also listen to an external audio device  
through this docking system.  
This docking system can be used as an alarm  
clock.You can select CD, FMTUNER, iPod/  
iPhone/iPad, or USB as alarm source.  
1 Press #$ꢊꢆꢋ%&' to select MP3 link  
source.  
Note  
2 Connect the supplied MP3 link cable to:  
#ꢅ the #$ꢊꢆꢋ%&' jack on the back of  
the unit  
# Ensure that you have set the clock correctly.  
#ꢅ the headphone jack on the device  
1 In standby mode, press and hold ꢖꢋ--$)  
TIMER until [SET TIMERƒꢗꢈꢁꢄꢅꢄꢒꢙꢁꢕꢚꢅ  
scrolls on the display.  
3 Start to play the device. (See the device  
ꢊꢈꢁꢕꢅꢙꢃꢆꢊꢃꢌꢚ"  
2 Press CD, USB, DOCK, or TUNER to  
select a source.  
3 Press ꢖꢋ--$)6%#-+ꢅꢄꢓꢅꢑꢓꢆ\ꢕꢙ"  
» The hour digits are displayed and begin  
to blink.  
4 Press  
/
to set the hour, and then  
press ꢖꢋ--$)6%#-+ again.  
» The minute digits are displayed and  
begin to blink.  
5 Press  
/
to set the minute.  
EN 17  
 
Tuner  
Tuning Range  
9 Product  
information  
FM: 87.5 - 108  
MHz  
50 KHz  
Tuning grid  
Sensitivity  
- Mono, 26dB S/N Ratio  
<22 dBu  
Note  
- Stereo, 46dB S/N Ratio <45 dBu  
Search Selectivity  
Total Harmonic Distortion <3%  
<30 dBu  
# Product information is subject to change  
without prior notice.  
Signal to Noise Ratio  
>45 dB  
ꢖQꢏ|ꢌ\|ꢔꢎꢌꢑꢐꢍ  
Speakers  
Speaker  
Impedance  
Speaker Driver  
6 ohm + 3 x 6 ohm  
=QZꢌ\ꢏꢓ  
Rated Output  
Power  
Frequency  
Response  
Signal to Noise  
Ratio  
200 W  
5.25” woofer + 3 x 2.75”  
full range  
>82 dB/m/W  
100 Hz - 16 kHz, 3 dB  
>70 dB  
Sensitivity  
General information  
AC power  
MP3 LINK Input  
<600 mV RMS  
220 - 240 V, 50/60 Hz  
Standby Power  
Consumption  
USB Direct  
Load of USB  
Dimensions  
- Main Unit  
ꢗ)ꢅ&ꢅŒꢅ&ꢅ{ꢚ  
Weight  
< 1 W  
Disc  
Laser Type  
Disc Diameter  
Support Disc  
Version 2.0/1.1  
0‹JJꢅꢙ*  
Semiconductor  
12 cm  
CD-DA, CD-R, CD-  
RW, MP3-CD, WMA-  
CD  
24 Bits / 44.1 kHz  
<1%  
350 x 978 x 350 mm  
Audio DAC  
Total Harmonic  
Distortion  
Frequency  
Response  
- With Packing  
- Main Unit  
15 kg  
11.5 kg  
60 Hz -16 kHz (44.1  
$Œ„ꢚ  
S/N Ratio  
>65 dBA  
18 EN  
 
USB playability information  
Compatible USB devices:  
#ꢅ ]ꢐ|ꢅ]ꢃꢈꢉꢅꢙꢁꢙꢓꢕꢍꢅꢗ]ꢐ|ꢅG"Jꢅꢓꢕꢅ]ꢐ|ꢎ"ꢎꢚ  
#ꢅ ]ꢐ|ꢅ]ꢃꢈꢉꢅꢂꢌꢃꢍꢁꢕꢈꢅꢗ]ꢐ|ꢅG"Jꢅꢓꢕꢅ]ꢐ|ꢎ"ꢎꢚ  
#ꢅ memory cards (requires an additional  
ꢑꢃꢕꢇꢅꢕꢁꢃꢇꢁꢕꢅꢄꢓꢅ@ꢓꢕ$ꢅ@ꢒꢄꢉꢅꢄꢉꢒꢈꢅꢊꢆꢒꢄꢚ  
Supported formats:  
#ꢅ ]ꢐ|ꢅꢓꢕꢅꢙꢁꢙꢓꢕꢍꢅ\ꢌꢁꢅꢋꢓꢕꢙꢃꢄꢅ[*?ꢎG%ꢅ  
[*?ꢎ‘%ꢅ[*?’Gꢅꢗꢈꢁꢑꢄꢓꢕꢅꢈꢒ„ꢁ>ꢅ‹ꢎGꢅ!ꢍꢄꢁꢈꢚ  
#ꢅ “\’ꢅ!ꢒꢄꢅꢕꢃꢄꢁꢅꢗꢇꢃꢄꢃꢅꢕꢃꢄꢁꢚ>ꢅ’G’GJꢅ^!ꢂꢈꢅꢃꢆꢇꢅ  
variable bit rate  
#ꢅ WMA v9 or earlier  
#ꢅ Directory nesting up to a maximum of 8  
levels  
#ꢅ Number of albums/ folders: maximum 99  
#ꢅ Number of tracks/titles: maximum 999  
#ꢅ ID3 tag v2.0 or later  
#ꢅ File name in Unicode UTF8 (maximum  
ꢌꢁꢆꢘꢄꢉ>ꢅꢎGꢔꢅ!ꢍꢄꢁꢈꢚ  
Unsupported formats:  
#ꢅ Empty albums: an empty album is an  
album that does not contain MP3/WMA  
\ꢌꢁꢈ%ꢅꢃꢆꢇꢅ@ꢒꢌꢌꢅꢆꢓꢄꢅ!ꢁꢅꢈꢉꢓ@ꢆꢅꢒꢆꢅꢄꢉꢁꢅꢇꢒꢈꢂꢌꢃꢍ"  
#ꢅ ]ꢆꢈꢊꢂꢂꢓꢕꢄꢁꢇꢅ\ꢌꢁꢅꢋꢓꢕꢙꢃꢄꢈꢅꢃꢕꢁꢅꢈ$ꢒꢂꢂꢁꢇ"ꢅ[ꢓꢕꢅ  
ꢁ&ꢃꢙꢂꢌꢁ%ꢅ)ꢓꢕꢇꢅꢇꢓꢑꢊꢙꢁꢆꢄꢈꢅꢗ"ꢇꢓꢑꢚꢅꢓꢕꢅ“\’ꢅ  
\ꢌꢁꢈꢅ@ꢒꢄꢉꢅꢁ&ꢄꢁꢆꢈꢒꢓꢆꢅ"ꢇꢌꢋꢅꢃꢕꢁꢅꢒꢘꢆꢓꢕꢁꢇꢅꢃꢆꢇꢅ  
not played.  
#ꢅ **X%ꢅ)*”%ꢅ\X“ꢅꢃꢊꢇꢒꢓꢅ\ꢌꢁꢈ  
#ꢅ {ꢀ“ꢅꢂꢕꢓꢄꢁꢑꢄꢁꢇꢅ)“*ꢅ\ꢌꢁꢈꢅꢗ"@ꢃꢖ%ꢅ"ꢙꢏꢃ%ꢅ  
"ꢙꢏꢂ%ꢅ"ꢙꢂꢏ%ꢅ"ꢃꢃꢑꢚ  
#ꢅ )“*ꢅ\ꢌꢁꢈꢅꢒꢆꢅ•ꢓꢈꢈꢌꢁꢈꢈꢅꢋꢓꢕꢙꢃꢄ  
Supported MP3 disc formats  
#ꢅ ISO9660, Joliet  
#ꢅ Maximum title number: 512 (depending  
ꢓꢆꢅ\ꢌꢁꢅꢆꢃꢙꢁꢅꢌꢁꢆꢘꢄꢉꢚ  
#ꢅ Maximum album number: 255  
#ꢅ Supported sampling frequencies: 32 kHz,  
44.1kHz, 48 kHz  
#ꢅ ꢐꢊꢂꢂꢓꢕꢄꢁꢇꢅ|ꢒꢄꢕꢃꢄꢁꢈ>ꢅ’G—G‹‘ꢅꢗ$!ꢂꢈꢚ%ꢅ  
variable bit rates  
EN 19  
 
No disc detected  
10 Troubleshooting  
#
#
Insert a disc.  
Check if the disc is inserted with printing  
side right.  
Wait until the moisture condensation at  
the lens has cleared.  
#
Warning  
# Never remove the casing of this device.  
#
#
Replace or clean the disc.  
]ꢈꢁꢅꢃꢅ\ꢆꢃꢌꢒ„ꢁꢇꢅX{ꢅꢓꢕꢅꢑꢓꢕꢕꢁꢑꢄꢅꢋꢓꢕꢙꢃꢄꢅꢇꢒꢈꢑ"  
To keep the warranty valid, never try to repair  
the system yourself.  
<ꢔꢐꢐꢑꢎꢆꢕꢌꢍQZꢔ[ꢆꢍꢑꢏꢆ\Zꢏꢍꢆꢌꢐꢆꢗꢖꢘꢆꢕꢏ@ꢌ|ꢏ  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
ꢂꢉꢒꢌꢒꢂꢈ"ꢑꢓꢙQ@ꢁꢌꢑꢓꢙꢁꢚ")ꢉꢁꢆꢅꢍꢓꢊꢅꢑꢓꢆꢄꢃꢑꢄꢅ  
Philips, ensure that the device is nearby and the  
model number and serial number are available.  
#
?ꢉꢁꢅꢆꢊꢙ!ꢁꢕꢅꢓꢋꢅꢋꢓꢌꢇꢁꢕꢈꢅꢓꢕꢅ\ꢌꢁꢈꢅꢒꢆꢅꢄꢉꢁꢅ]ꢐ|ꢅ  
device has exceeded a certain limit. This  
phenomenon is not a malfunction.  
?ꢉꢁꢅꢋꢓꢕꢙꢃꢄꢈꢅꢓꢋꢅꢄꢉꢁꢈꢁꢅ\ꢌꢁꢈꢅꢃꢕꢁꢅꢆꢓꢄꢅ  
supported.  
#
USB device not supported  
#
The USB device is incompatible with the  
unit. Try another one.  
No power  
#
#
#
Ensure that the AC power plug of the  
unit is connected properly.  
Ensure that there is power at the AC  
outlet.  
To save power, the system switches  
off automatically 15 minutes after track  
play reaches the end and no control is  
operated.  
Poor radio reception  
#
Increase the distance between the unit  
and your TV or VCR.  
#
If the signal is too weak, adjust the  
antenna or connect an external antenna  
for better reception.  
Timer does not work  
#
#
Set the clock correctly.  
Switch on the timer.  
No sound or poor sound  
Adjust the volume.  
#
Clock/timer setting erased  
No response from the unit  
#
Power has been interrupted or the power  
cord has been disconnected.  
Reset the clock/timer.  
#
Disconnect and reconnect the AC power  
plug, and then turn on the unit again.  
#
Remote control does not work  
#
|ꢁꢋꢓꢕꢁꢅꢂꢕꢁꢈꢈꢒꢆꢘꢅꢃꢆꢍꢅꢋꢊꢆꢑꢄꢒꢓꢆꢅ!ꢊꢄꢄꢓꢆ%ꢅ\ꢕꢈꢄꢅ  
select the correct source with the remote  
control instead of the main unit.  
Reduce the distance between the remote  
control and the unit.  
Insert the battery with its polarities (+/–  
ꢈꢒꢘꢆꢈꢚꢅꢃꢌꢒꢘꢆꢁꢇꢅꢃꢈꢅꢒꢆꢇꢒꢑꢃꢄꢁꢇ"  
Replace the battery.  
#
#
#
#
Aim the remote control directly at the  
sensor on the front of the unit.  
20 EN  
 
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  
DCM5090_10_UM_V1.0  
 

Pelco Work Light WS5000 User Manual
Philips Car Speaker HTS3511E User Manual
Philips CRT Television 14PT2002 User Manual
Philips Hair Dryer SJA1184 User Manual
Philips Headphones SBCHP 625 00 User Manual
Philips Network Router PET744 User Manual
Pioneer Computer Drive DVR 212 User Manual
Poulan Blower 115351227 User Manual
Proctor Silex Slow Cooker 840149500 User Manual
ProForm Treadmill 495 LS User Manual