Philips Portable DVD Player PET742 05 User Manual

Philips Portable DVD Player PET742  
Note:  
During play, you can:  
– Rotate the screen of the player to watch for your  
convenience.  
Quick start guide  
1
To replace the battery:  
1 Open the battery compartment.  
Charge your battery  
This portable DVD player is designed with a  
built-in lithium battery to supply power to the  
player when you are on travel.  
2 Insert 1 CR2025 battery with correct polarity  
(+/-) as indicated.  
3 Close the battery compartment.  
1 Slide the POWER switch to the OFF position  
(charging of the DVD player only possible in  
the power-off mode).  
– Press directly to adjust brightness of screen  
backlight to match lighting conditions.  
3
Enjoy (AV OUT)  
CHR  
Connecting additional equipment (TV for  
example)  
3
Enjoy (Disc operation)  
2 Connect the supplied power adaptor cord (or  
the car adaptor) to the player and AC mains  
(or the car cigarette lighter outlet) to start  
charging.  
The CHR indicator turns red.  
When the battery is fully charged, the  
indicator turns off.  
1 Connect the AV OUT socket on the set to the  
video and audio sockets on a TV as shown  
directly.  
2 Switch on the TV and set to the correct video-  
in channel.  
You can consult the owner's manual of  
your TV. (If your TV does not have Audio  
andVideo inputs, you will need to purchase  
a RF modulator. Please consult your dealer.)  
3 Disconnect the power adaptor cord (or the  
car adaptor) when the CHR indicator turns off.  
1 Open the lid of the player.  
2 Slide the POWER switch to ON to switch on  
the DVD player.  
Note:  
You can also connect the supplied power adaptor  
cord (or the car adaptor) to the player and AC  
mains (or the car cigarette lighter outlet) directly  
wherever possible.  
The  
indicator turns on.  
TV  
3 Slide OPEN2 on the player.  
White  
Not  
4 Remove the protective card (if any) and load a  
supplied  
Red  
AUDIO IN  
disc with the label side facing up.  
Yellow  
2
5 Close the disc door.  
Prepare the remote control  
VIDEO IN  
Playback starts automatically. If not, press 2;.  
6 To stop playback, press 9.  
For first time use  
Remove the protective tab to activate the  
remote control battery.  
Printed in China  
WK0907  
 
3 OPEN HERE  

Pelco Home Security System C3468M User Manual
Philips Car Satellite TV System HFL3008D User Manual
Philips DVD Player SPD6104BD User Manual
Philips Fish Finder SBC RU 510 User Manual
Philips Flat Panel Television 14AA3327 User Manual
Philips Portable DVD Player PET7402S 37 User Manual
Philips Projection Television 60PP 9352 User Manual
Pioneer Car Stereo System KEH P5900 User Manual
Pioneer DVD Player DVD 116 User Manual
Polycom IP Phone 1725 16823 001 User Manual