Subwoofer Manual
Manuel de subwoofer
Models: RX110, RX110d, RX112, RX112d
Features
Caractéristiques
•
One Piece Polypropylene Dustcap
High Temperature 2 Inch OFC Voice Coils
Long Throw Rubber Surround
Optimized for Sealed or Vented Enclosures
Rigid Powder Coated Steel Frame
Nickel Plated 12 Gauge Speaker Terminals
High Excursion Motor Design
•
•
•
•
•
•
•
Pare-poussière monopièce
•
•
•
•
•
•
Bobines acoustiques en cuivre exempt d’oxygène à haute température
Enceinte d’ambiance avec contour en caoutchouc de longue portée
Optimisé pour les boîtiers étanches ou porté
Panier rigide en acier
Bornes d’enceinte nickelées de calibre 12
Modèle de moteur à grand battement
Subwoofer Owner’s Manual
system diagrams
Dual 4 ohm Subwoofer
(wired in parallel)
RX112d SINGLE SUBWOOFER SYSTEM
RX250.1 Speaker Terminal
RX250.1 + (1) RX112d
+
-
+
-
All voice coils are wired in parallel for 2 ohm load.
RX250.1 makes maximum power into 2 ohm load.
Toutes les bobines mobiles sont câblées en parallèle de 2 Ohms.
RX250.1 faire puissance maximale en 2 Ohms.
Single 4 ohm Subwoofers
(wired in parallel)
RX112 DUAL SUBWOOFER SYSTEM
RX500.1 Speaker Terminal
RX500.1 + (2) RX112
+
-
+
-
All voice coils are wired in parallel for 2 ohm load.
RX500.1 makes maximum power into 2 ohm load.
Toutes les bobines mobiles sont câblées en parallèle pour
2 Ohms. RX500.1 rend la puissance maximale de charge
en 2 ohm.
RX112 FOUR CHANNEL SYSTEM
RX400.4 + R65CX 4 ohms stereo front
and RX112 4 ohms bridged rear
+
-
-
+
RX400.4 makes maximum power into a 4 ohm bridged load.
RX400.4 faire puissance maximale en 4 ohm charge comblé.
-
RX400.4 Speaker Terminal
+
-
Single 4 ohm Subwoofer
Specifications
RX110
3.4
RX110d
1.7
RX112
3.5
RX112d
1.7
T/S Parameters:
Re (Dcr)
FS (Hz)
Sd (SqM)
BL TM
33.8
32.9
28.5
28.0
.05
.05
.035
.035
12.3
8.3
13.3
8.4
Qms
4.2
4.03
3.7
3.5
Qes
.553
.568
.601
.667
Qts
.49
.5
.52
.56
Vas (liters)
Cms (uM/N)
Mms (gms)
SPL
32.6
35.8
62.63
183.04
169.88
90dB
Single 4
70.60
206.34
156.11
90dB
Dual 4
191.39
116.09
90dB
Single 4
210.35
111.32
90dB
Dual 4
Impedance
RX110
RX112
Specifications:
RX110d
200 watts
25mm
RX112d
200 watts
25mm
RMS Power Handling
Xmax (Peak to Peak)
Mounting Diameter
11 1/8in - 282mm
5 3/4in - 145mm
9 1/4in - 235mm
5 1/4in - 133mm
Mounting Depth
*Specifications subject to change
Phoenix Gold
A Division of AAMP of America™
13190 56th Court
Clearwater, Florida 33760
P: 866-788-4237
© 2013 AAMP of Florida, Inc
Designed and Engineered in the USA
LIMITED WARRANTY
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This
warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should
service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the
defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse,
product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not
cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear
and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold.
Consumers needing service or warranty information for these products must contact that country’s reseller for information.
|