Pioneer DVD Player DV 595K S User Manual

DVD Player

DV-595K-S

DV-490V-S

DV-490V-K

DV-393-S

Operating Instructions

[For PX model]

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_En

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the

unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and

televisions, use shielded cables and connectors for connections.

D8-10-3a_En

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate

the equipment.

D8-10-2_En

CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. ^D6-8-2-1_En

WARNING

POWER-CORD CAUTION

To prevent a fire hazard, do not place any naked

flame sources (such as a lighted candle) on the

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

service center or your dealer for a replacement. S002_En

equipment.

D3-4-2-1-7a_A_En

This product incorporates copyright protection

technology that is protected by method claims

of certain U.S. patents and other intellectual

property rights owned by Macrovision

Corporation and other rights owners. Use of

this copyright protection technology must be

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filed

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture.

D3-4-2-1-3_A_En

This product includes FontAvenue^®fonts

licenced by NEC corporation. FontAvenue is

a registered trademark of NEC Corporation.

When disposing of used batteries, please comply

with governmental regulations or

environmental public instruction’s rules that

apply in your country/area.

D3-4-2-3-1_En

For U.S. and Australia Model

For Taiwan exclusively

Taiwanese two pin flat-bladed plug

This product is for general household purposes.

Any failure due to use for other than household

purposes (such as long-term use for business

purposes in a restaurant or use in a car or ship)

and which requires repair will be charged for

even during the warranty period.

K041_En

C67-7-3_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so that you will know how to operate your

model properly. After you have finished reading the instructions, put them in a safe place for

future reference.

Contents

Looping a section of a disc . . . . . . . . . . . .30

Using repeat play. . . . . . . . . . . . . . . . . . . .30

Using random play . . . . . . . . . . . . . . . . . .31

Creating a program list . . . . . . . . . . . . . . .32

Searching a disc . . . . . . . . . . . . . . . . . . . .33

Switching subtitles . . . . . . . . . . . . . . . . . .34

Switching audio language/channels . . . . .34

Zooming the screen. . . . . . . . . . . . . . . . . .34

Switching camera angles . . . . . . . . . . . . .34

Displaying disc information. . . . . . . . . . . .35

01 Before you start

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

What’s in the box . . . . . . . . . . . . . . . . . . . . 6

Hints on installation. . . . . . . . . . . . . . . . . . 6

Disc / content format playback

compatibility . . . . . . . . . . . . . . . . . . . . . . . 7

02 Connecting up

Easy connections . . . . . . . . . . . . . . . . . . . 10

Connecting using the S-video output . . . . 11

Connecting using the component video

output . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting to an AV receiver . . . . . . . . . . 12

Connecting using HDMI (DV-490V only) . . 14

About HDMI. . . . . . . . . . . . . . . . . . . . . . . 14

06 Audio Settings and Video Adjust

menus

Audio Settings menu. . . . . . . . . . . . . . . . .36

Video Adjust menu . . . . . . . . . . . . . . . . . .37

07 Initial Settings menu

03 Controls and displays

Using the Initial Settings menu . . . . . . . . .38

Digital Audio Out settings . . . . . . . . . . . . .38

Video Output settings . . . . . . . . . . . . . . . .39

Language settings. . . . . . . . . . . . . . . . . . .40

Display settings. . . . . . . . . . . . . . . . . . . . .41

Options settings . . . . . . . . . . . . . . . . . . . .41

Parental Lock . . . . . . . . . . . . . . . . . . . . . .42

Front panel. . . . . . . . . . . . . . . . . . . . . . . . 16

Remote control . . . . . . . . . . . . . . . . . . . . 18

04 Getting started

Switching on . . . . . . . . . . . . . . . . . . . . . . 19

Using the on-screen displays . . . . . . . . . . 20

Setting up the player for your TV. . . . . . . . 20

Setting the language of this player’s

08 Additional information

on-screen displays . . . . . . . . . . . . . . . . . . 21

Playing discs . . . . . . . . . . . . . . . . . . . . . . 21

Singing Your Favorite Songs Along with

Karaoke Discs . . . . . . . . . . . . . . . . . . . . . 24

Taking care of your player and discs . . . . .44

Screen sizes and disc formats. . . . . . . . . .45

Setting the TV system . . . . . . . . . . . . . . . .46

Resetting the player. . . . . . . . . . . . . . . . . .46

DVD-Video regions . . . . . . . . . . . . . . . . . .46

Selecting languages using the language

code list. . . . . . . . . . . . . . . . . . . . . . . . . . .47

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . .48

Language code list . . . . . . . . . . . . . . . . . .50

Country/Area code list . . . . . . . . . . . . . . . .50

Specifications . . . . . . . . . . . . . . . . . . . . . .51

05 Playing discs

Scanning discs . . . . . . . . . . . . . . . . . . . . 27

Playing in slow motion . . . . . . . . . . . . . . . 27

Frame advance/frame reverse . . . . . . . . . 28

Viewing a JPEG slideshow . . . . . . . . . . . . 28

Browsing DVD or Video CD/Super VCD

disc with the Disc Navigator. . . . . . . . . . . 28

Browsing WMA, MP3, DivX video and JPEG

files with the Disc Navigator. . . . . . . . . . . 29

Before you start

^CB^hae^pf^teo^{r 1}re you start

Features

sound audio , all using one interface. You can

easily connect to a HDMI-equipped AV receiver

or audiovisual device for high quality audio and

video, and communication between the video

source and (DTV) players, set-top boxes, and

other audiovisual devices is also supported.

•

24-bit/96 kHz compatible DAC

The integrated 24-bit/96 kHz DAC means that

this player is compatible with high sampling-

rate discs, capable of delivering exceptional

sound quality in terms of dynamic range, low-

level resolution and high-frequency detail.

•

DSP effects for enhanced playback

See Audio Settings and Video Adjust menus on

•

Excellent audio performance surround

page 36.

sound entertainment with Dolby Digital

•

Picture zoom

See Zooming the screen on page 34.

and DTS software

•

MP3 and WMA compatibility

Logos:

See Compressed audio compatibility on page 8.

When connected to a suitable AV amplifier or

receiver, this player gives great surround

sound with Dolby Digital and DTS discs.

•

JPEG compatibility

See JPEG file compatibility on page 9.

®*5

•

DivX

video compatibility

•

PureCinema Progressive Scan video

When connected to a progressive scan-

See DivX video compatibility on page 9.

compatible TV or monitor using the

Logos:

component video outputs, you can enjoy

extremely stable, flicker free images, with the

same frame refresh rate as the original movie.

•

Energy saving design

•

New Disc Navigator with moving

An auto power-off function switches the player

pictures

into standby if not used for about 30 minutes.

The new Disc Navigator enables you play the

first few seconds of each title or chapter in a

thumbnail image on screen.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

HDMI digital interface (DV-490V only)

The HDMI (High Definition Multimedia

“DTS” and “DTS Digital Out” are registered

Interface) interconnect provides high quality

digital audio and video, all from a single user-

friendly connector. HDMI is the first consumer

electronics interface to support uncompressed

standard, enhanced, or high-definition video

plus standard to multi-channel surround

trademarks of Digital Theater Systems, Inc.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC.

Before you start

It is not possible to output SACD or DVD-

Important

Audio sources from the HDMI connection of this

player.

Incorrect use of batteries can result in hazards

such as leakage and bursting. Please observe

the following:

DivX, DivX Certified, and associated logos are

trademarks of DivX, Inc. and are used under

license.

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery

together—although they may look similar,

different batteries may have different

voltages.

What’s in the box

Please confirm that the following accessories

are in the box when you open it.

• Make sure that the plus and minus ends of

each battery match the indications in the

battery compartment.

• Remote control

• AA/R6P dry cell batteries x 2

• Audio/video cable (red/white/yellow plugs)

• Remove batteries from equipment that

isn’t going to be used for a month or more.

• Power cable (Central American, South

American and Taiwan model x2)

• When disposing of used batteries, please

comply with governmental regulations or

environmental public instruction’s rules

that apply in your country or area.

• Operating instructions x2 (Australian, Thai-

land and PX model x1)

• Front panel button names sticker (Taiwan

models only) — Chinese language button

names for the front panel controls.

• Do not use or store batteries in direct

sunlight or other excessively hot place,

such as inside a car or near a heater. This

can cause batteries to leak, overheat,

explode or catch fire. It can also reduce the

life or performance of batteries.

• Remote control overlay (Taiwan models

only) — Place the overlay on the remote

control to be able to read the buttons in

Chinese.

Hints on installation

Putting the batteries in the remote

We want you to enjoy using this product for

years to come, so please use the following

guidelines when choosing a suitable location:

•

Open the battery compartment cover

and insert the batteries as shown.

Use two AA/R6P batteries and follow the

indications (ꢁ, ꢂ) inside the compartment.

Close the cover when you’re finished.

Do...

• Use in a well-ventilated room.

• Place on a solid, flat, level surface, such as

a table, shelf or stereo rack.

Don’t...

• Use in a place exposed to high

temperatures or humidity, including near

radiators and other heat-generating

appliances.

Before you start

• Place on a window sill or a place where the

player will be exposed to direct sunlight.

• Use in an excessively dusty or damp

environment.

DVD-Video

DVD-R

DVD-RW

• Place directly on top of an amplifier, or

other component in your stereo system

that becomes hot in use.

Audio CD

Video CD

CD-R

CD-RW

• Use near a television or monitor as you may

experience interference—especially if the

television uses an indoor antenna.

• Use in a kitchen or other room where the

player may be exposed to smoke or steam.

Fujicolor CD

• Use on a thick rug or carpet, or cover with

cloth—this may prevent proper cooling of

the unit.

• This unit will play DVD+R/+RW discs.

•

is a trademark of DVD Format/Logo

Licensing Corporation.

• Place on an unstable surface, or one that is

not large enough to support all four of the

unit’s feet.

•

is a trademark of Fuji Photo Film Co. Ltd.

• Also compatible with KODAK Picture CD

This player supports the IEC’s Super VCD

standard. Compared to the Video CD standard,

Super VCD offers superior picture quality, and

allows two stereo soundtracks to be recorded.

Super VCD also supports the widescreen size.

Disc / content format playback

compatibility

This player is compatible with a wide range of

disc types (media) and formats. Playable discs

will generally feature one of the following logos

on the disc and/or disc packaging. Note

however that some disc types, such as

recordable CD and DVD, may be in an

unplayable format—see below for further

compatibility information.

Super VCD

About DualDisc playback

Please also note that recordable discs cannot be

recorded using this player.

A DualDisc is a new two -sided disc, one side

of which contains DVD content video, audio,

etc. while the other side contains non-DVD

content such as digital audio material.

The non-DVD, audio side of the disc is not

compliant with the CD Audio specification and

therefore may not play.

The DVD side of a DualDisc plays in this

product.

For more detailed information on the DualDisc

specification, please refer to the disc

manufacturer or disc retailer.

Before you start

• DRM (Digital Rights Management)

compatible: Yes (DRM-protected audio

files will not play in this player—see also

DRM in the Glossary on page 48)

CD-R/RW compatibility

• Compatible formats: CD-Audio, Video CD/

Super VCD, ISO 9660 CD-ROM* containing

MP3, WMA, JPEG or DivX video files

* ISO 9660 Level 1 or 2 compliant. CD

physical format: Mode1, Mode2 XA Form1.

Romeo and Joliet file systems are both

compatible with this player.

• File extensions: .mp3, .wma (these must be

used for the player to recognize MP3 and

WMA files – do not use for other file types)

• Multi-session playback: No

• Unfinalized disc playback: No

About WMA

• File structure (may differ): Up to 299 folders

on a disc; up to 648 folders and files

(combined) within each folder

DVD+R/DVD+RW compatibility

Only DVD+R/DVD+RW discs recorded in

‘Video Mode (DVD Video Mode)’ which have

been finalized, can be played back. However,

some editing made during the recording may

not be played back accurately.

The Windows Media logo printed on the box

indicates that this player can playback

Windows Media Audio content.

WMA is an acronym for Windows Media Audio

andreferstoanaudiocompressiontechnology

developed by Microsoft Corporation. WMA

content can be encoded by using Windows

DVD-R/RW compatibility

• Compatible formats: DVD-Video, Video

Recording (VR)*

* Edit points may not play exactly as edited;

screen may go momentarily blank at edited

points.

Media Player version 7, 7.1, Windows Media

Player for Windows XP, or Windows Media

Player 9 Series.

• Unfinalized playback: No

Microsoft, Windows Media, and the Windows

• WMA/MP3/JPEG file playback on DVD-R/

RW: No

logo are trademarks, or registered trademarks of

Microsoft Corporation in the United States and/

or other countries.

Compressed audio compatibility

• Compatible formats: MPEG-1 Audio Layer 3

(MP3), Windows Media Audio (WMA)

About DivX

DivX is a media technology created by DivX,

Inc. DivX media files contain compressed

video. DivX files can also include advanced

media features like menus, subtitles, and

alternate audiotracks. This player can play DivX

video files burned on CD-R/RW/ROM discs.

Keeping the same terminology as DVD-Video,

• Sampling rates: 32 kHz, 44.1 kHz or 48 kHz

• Bit-rates: Any (128 Kbps or higher

recommended)

• VBR (variable bit rate) MP3 playback: No

• VBR WMA playback: No

• WMA lossless encoding compatible: No

Before you start

individual DivX video files are called "Titles".

When naming files/titles on a CD-R/RW disc

prior to burning, keep in mind that by default

they will be played in alphabetical order.

• Official DivX Certified product.

• Plays all versions of DivX video (including

DivX 6) with standard playback of DivX

media files.

Displaying DivX subtitle files

• File extensions: .avi and .divx (these must

be used for the player to recognize DivX

video files). Note that all files with the .avi

extension are recognized as MPEG4, but not

all of these are necessarily DivX video files

and therefore may not be playable on this

player.

The font sets listed below are available for DivX

external subtitle files. You can see the proper

font set on-screen by setting the Subtitle

Language (in Language settings on page 40)

to match the subtitle file.

This player supports the following language

groups:

DivX, DivX Certified, and associated logos are

trademarks of DivX, Inc. and are used under

license.

Group 1: Albanian (sq), Basque (eu), Catalan (ca),

Danish (da), Dutch (nl), English (en), Faroese (fo),

Finnish (fi), French (fr), German (de), Icelandic (is), Irish

(ga), Italian (it), Norwegian (no), Portuguese (pt), Rhaeto-

Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv)

Group 2: Albanian (sq), Croatian (hr), Czech (cs),

Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk),

Slovenian (sl)

JPEG file compatibility

• Compatible formats: Baseline JPEG and

EXIF 2.2* still image files up to a resolution

of 3072 x 2048.

Group 3: Bulgarian (bg), Byelorussian (be), Macedonian

(mk), Russian (ru), Serbian (sr), Ukrainian (uk)

Group 4: Hebrew (iw), Yiddish (ji)

*File format used by digital still cameras.

• Progressive JPEG compatible: No

Group 5: Turkish (tr)

• File extensions: .jpg (must be used for the

player to recognize JPEG files – do not use

for other file types)

• Some external subtitle files may be

displayed incorrectly or not at all.

• For external subtitle files the following

subtitle format filename extensions are

supported (please note that these files are

not shown within the disc navigation

menu): .srt, .sub, .ssa, .smi

PC-created disc compatibility

Discs recorded using a personal computer

may not be playable in this unit due to the

setting of the application software used to

create the disc. In these particular instances,

check with the software publisher for more

detailed information.

• The filename of the movie file has to be

repeated at the beginning of the filename

for the external subtitle file.

• The number of external subtitle files which

can be switched for the same movie file is

limited to a maximum of 10.

Discs recorded in packet write mode (UDF

format) are not compatible with this player.

Check the DVD-R/RW or CD-R/RW software

disc boxes for additional compatibility

information.

DivX video compatibility

Connecting up

^CC^ho^aptn^ern²ecting up

Easy connections

• Before making or changing any connections, switch off the power and disconnect the power

cable from the AC outlet.

• The setup described here is a basic setup that allows you to play discs using just the cables

supplied with the player. In this setup, stereo audio is played through the speakers in your TV.

• The following illustrations show the DV-393, but connections for the DV-490V and DV-595K are

the same except where indicated.

A/V IN

White

VIDEO OUT AUDIO OUT

OPTICAL

DIGITAL AUDIO OUT

COAXIAL

S-VIDEO

OUT

COMPONENT VIDEO OUT

Red

Yellow

To power

outlet

Important

• This player is equipped with copy protection technology. Do not connect this player to your TV

via a VCR using audio/video or S-video cables, as the picture from this player will not appear

properly on your TV. (This player may also not be compatible with some combination TV/VCRs

for the same reason; refer to the manufacturer for more information.)

• When connecting to your TV as shown above, do not set the Component Out setting (See

Video Output settings on page 39) to Progressive.

Connecting up

Connect the VIDEO OUT and AUDIO

OUT L/R jacks to a set of A/V inputs on your

TV.

S-VIDEO

Use the supplied audio/video cable,

connecting the red and white plugs to the

audio outputs and the yellow plug to the video

output. Make sure you match up the left and

right audio outputs with their corresponding

inputs for correct stereo sound.

VIDEO OUT AUDIO OUT

OPTICAL

DIGITAL AUDIO OUT

COAXIAL

See below if you want to use a component or

S-video cable for the video connection.

S-VIDEO

OUT

COMPONENT VIDEO OUT

Connect the supplied AC power cable to

the AC IN inlet, then plug into a power

outlet.

Connecting using the

component video output

Note

You can use the component video output

instead of the standard video out jack to

connect this player to your TV (or other

equipment). This should give you the best

quality picture from the three types of video

output available.

• Before unplugging the player from the

power outlet, make sure you first switch it

into standby using either the front panel ꢀ

STANDBY/ON button, or the remote

control, and wait of the -OFF- message to

disappear from the player’s display.

• For the above reasons, do not plug this

player into a switched power supply found

on some amplifiers and AV receivers.

•

Use a component video cable (not

supplied) to connect the COMPONENT

VIDEO OUT jacks to a component video

input on your TV, monitor or AV receiver.

Connecting using the S-video

output

If your TV (or other equipment) has an S-video

(S1) input, you can use the S-video output on

this player instead of the standard (composite)

output for a better quality picture.

COMPONENT

VIDEO IN

VIDEO OUT AUDIO OUT

•

Use an S-video cable (not supplied) to

connect the S-VIDEO OUT to an S-video

input on your TV (or monitor or AV

receiver).

OPTICAL

DIGITAL AUDIO OUT

COAXIAL

S-VIDEO

OUT

COMPONENT VIDEO OUT

Line up the small triangle above the jack with

the same mark on the plug before plugging in.

Connecting up

resolution will be reset to its default—see

Resetting the output resolution to the

default setting with HDMI connection on

page 15.)

Watching progressive scan video

from the component video outputs

This player can output progressive scan video

from the component video output. Compared

to interlace video, progressive scan video

effectively doubles the scanning rate of the

picture, resulting in a very stable, flicker-free

image.

ꢀ STANDBY/ON

To set up the player for use with a progressive

scan TV, see Video Output settings on page 39.

When the player is set to output progressive

scan video, the PRGSVE indicator lights in the

front panel display.

DV-595K

ꢃ

ꢀ STANDBY/ON

Important

• When Component Out (page 39) is set to

Progressive, there is no video output from

the VIDEO OUT (composite) and S (S-

video) jacks.

DV-490V

ꢃ

• If you want to display video on more than

one monitor simultaneously, make sure

the player is set to Interlace.

ꢀ STANDBY/ON

• If you connect a TV that is not compatible

with a progressive scan signal and switch

the player to progressive, you will not be

able to see any picture at all. In this case,

switch everything off and reconnect using

the supplied video cable (see Easy

DV-393

ꢃ

connections on page 10), then switch back

to Interlace (see below).

Switching the video output to interlace

using the front panel controls

Switch the player to standby then, using the

front panel controls, press ꢀ STANDBY/ON

while pressing ꢃto switch the player back to

Interlace.

Connecting to an AV receiver

To enjoy multichannel surround sound you

need to connect this player to an AV receiver

using the digital audio output. This player has

both coaxial and optical digital jacks; use

whichever is convenient.

• DV-490V only: If the player is connected

using HDMI, disconnect the HDMI cable

before resetting the player to interlace

output. (If left connected, the HDMI output

In addition to a digital connection, we

recommend also connecting using the stereo

analog connection.

Connecting up

You’ll probably also want to connect a video

output to your AV receiver. You can use any of

the video outputs available on this player (the

illustration shows a standard (composite)

connection).

Connect the analog AUDIO OUT L/R and

VIDEO OUT jacks on this player to a set of

analog audio and video inputs on your AV

receiver.

Connect one of the DIGITAL AUDIO OUT

jacks on this player to a digital input on

your AV receiver.

AV receiver

AUDIO/

VIDEO IN

This enables you to listen to multichannel

surround sound.

VIDEO OUT AUDIO OUT

For an optical connection, use an optical cable

(not supplied) to connect the OPTICAL

DIGITAL AUDIO OUT jack to an optical input

on your AV receiver.

OPTICAL

DIGITAL AUDIO OUT

COAXIAL

S-VIDEO

OUT

COMPONENT VIDEO OUT

For a coaxial connection, use a coaxial cable

(similar to the supplied video cable) to connect

the COAXIAL DIGITAL AUDIO OUT jack to a

coaxial input on your AV receiver.

Tip

• To use the karaoke function you must have

this player connected to your amplifier

using the analog outputs.

DIGITAL IN

(OPTICAL)

AV receiver

DIGITAL IN

(COAXIAL)

VIDEO OUT AUDIO OUT

OPTICAL

DIGITAL AUDIO OUT

COAXIAL

S-VIDEO

OUT

COMPONENT VIDEO OUT

Connecting up

Connecting using HDMI (DV-

490V only)

Note

• This unit has been designed to be

compliant with HDMI (High Definition

Multimedia Interface) . Depending on the

component you have connected, using a

DVI connection may result in unreliable

signal transfers.

If you have a HDMI equipped monitor or

display, you can connect it to this player using

a commercially available HDMI cable.

The HDMI connector outputs uncompressed

digital video, as well as almost every kind of

digital audio that the player is compatible with,

including DVD-Video, Video CD/Super VCD,

CD and MP3.

• When you change the component

connected to the HDMI output, you will

also need to change the HDMI settings to

match the new component (see HDMI Out

on page 39, HDMI Resolution on page 40

and HDMI Color on page 40 to do this).

However, the settings for each component

are then stored in memory (for up to 2

components).

Use an HDMI cable to connect the HDMI

OUT interconnect on this player to an HDMI

interconnect on a HDMI-compatible

monitor.

• The HDMI connection is compatible with

44.1 kHz/48 kHz, 16 bit/20 bit/24 bit 2

channel linear PCM signals, as well as

Dolby Digital, DTS and MPEG audio

bitstream.

HDMI

connector

HDMI-compatible display

VIDEO OUT AUDIO OUT

COAXIAL

DIGITAL

AUDIO OUT

About HDMI

HDMI (High Definition Multimedia Interface)

supports both video and audio on a single

digital connection for use with DVD players,

DTV, set-top boxes, and other AV devices.

HDMI was developed to provide the

technologies of High Bandwidth Digital

Content Protection (HDCP) as well as Digital

Visual Interface (DVI) in one specification.

HDCP is used to protect digital content

transmitted and received by DVI-compliant

displays.

HDMI

OUT

OPTICAL S-VIDEO OUT COMPONENT VIDEO OUT

• The arrow on the cable connector body

should be face up for correct alignment

with the connector on the player.

HDMI has the capability to support standard,

enhanced, or high-definition video plus

standard to multi-channel surround-sound

audio. HDMI features include uncompressed

digital video, a bandwidth of up to 2.2 gigabytes

per second (with HDTV signals), one connector

(instead of several cables and connectors), and

communication between the AV source and

AV devices such as DTVs.

Connecting up

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC.

Resetting the output resolution to the

default setting with HDMI connection

Switch the player to standby then, using the

front panel controls, press ꢀ STANDBY/ON

while pressing ꢃto switch the player back to

576P/480P.

ꢀ STANDBY/ON

DV-490V

ꢃ

Controls and displays

^CC^hao^ptn^ert³rols and displays

Front panel

DV-595K

16 15 14

12 11

12 11 10

DV-490V

12 11 10

DV-393

Controls and displays

ꢀ STANDBY/ON (page 19)

Disc tray

TOP MENU (page 23)

ENTER & cursor buttons (page 20)

MENU (page 23)

RETURN (page 23)

HOME MENU (page 20)

Display

ꢄ OPEN/CLOSE (page 22)

10 ꢅ (page 22)

11 ꢆ (page 22)

12 ꢇ (page 22)

13 ꢃ and ꢈ (page 22)

14 ECHO control (DV-595K only) (page 24)

15 VOLUME control (DV-595K only) (page

24)

16 MIC input jacks (DV-595K only) (page

24)

17 HDMI indicator (DV-490V only)

Lights when this player is recognized by

another HDMl or DVI/HDCP compatible

component.

18 RW Compatible (page 8)

Controls and displays

Remote control

11 ꢆ (page 22)

12 PLAY MODE (for DV-393 and DV-490V)

(page 30)

LOW (ꢌ) (for DV-595K) (page 24)

STANDBY/ON

OPEN/CLOSE

ꢄ

ꢀ

13 SURROUND (for DV-393 and DV-490V)

(page 36)

AUDIO

SUBTITLE

ANGLE

CLEAR

ENTER

HIGH (ꢍ) (for DV-595K) (page 24)

14 ꢄ OPEN/CLOSE (page 22)

15 ANGLE (page 34)

TOP MENU

16 CLEAR (page 33)

17 ENTER (page 20)

ENTER

18 MENU (page 23)

HOME

RETURN

19 RETURN (page 20)

20 ꢎ and ꢏ/ꢐ (pages 22, 27)

21 ꢈ (page 22)

ꢊ/ꢋ

ꢉ

ꢏ/ꢐ

ꢎ

ꢅ

ꢃ

ꢆ

ꢇ

ꢈ

22 ꢇ (page 22)

PLAY MODE SURROUND

ZOOM

DISPLAY

23 DISPLAY (page 35)

24 ZOOM (page 34)

DV-595K

KEY CONTROL

ꢌ

ꢍ

Using the remote control

Keep in mind the following when using the

remote control:

12 13

ꢀ STANDBY/ON (page 19)

AUDIO (page 34)

• Make sure that there are no obstacles

between the remote and the remote sensor

on the unit.

SUBTITLE (page 34)

Number buttons (page 22)

TOP MENU (page 23)

• The remote has a range of about 7 m.

• Remote operation may become unreliable

if strong sunlight or fluorescent light is

shining on the unit’s remote sensor.

ENTER & cursor buttons (page 20)

HOME MENU (page 20)

ꢉ and ꢊ/ꢋ (pages 22, 27)

ꢅ (page 22)

• Remote controllers for different devices

can interfere with each other. Avoid using

remotes for other equipment located close

to this unit.

• Replace the batteries when you notice a

fall off in the operating range of the remote.

10 ꢃ (page 22)

Getting started

Chapter 4

Getting started

Switching on

FAQ

After making sure that everything is connected

properly and that the player is plugged in,

press ꢀ STANDBY/ON on the front panel or

remote control to switch the player on.

• My DVD player switches on but there is

nothing displayed on my TV.

Make sure that the TV is set to the correct

video input (not a TV channel). For

example, if you connected this player to the

VIDEO 1 inputs on your TV, switch your TV

to VIDEO 1.

Also, switch on your TV and make sure that it is

set to the input you connected the DVD player

to.

ꢀ STANDBY/ON

Note

• This player features a screen saver and an

auto power off function. If the player is

stopped and no button is pressed for

around five minutes, the screen saver

starts. If the disc tray is closed but no disc

is playing and no control is pressed for

about 30 minutes, the player automatically

goes into standby.

DV-595K

ꢀ STANDBY/ON

DV-490V

ꢀ STANDBY/ON

DV-393

Getting started

Using the on-screen displays

Setting up the player for your

For ease of use, this player makes extensive

use of graphical on-screen displays (OSDs).

If you have a widescreen (16:9) TV, you should

setup the player so that the picture will be

presented correctly. If you have a conventional

(4:3) TV, you can leave the player on the default

setting and move on to the next section.

All the screens are navigated in basically the

same way, using the cursor buttons (ꢀ/ꢁ/ꢂ/

ꢃ) to change the highlighted item and

pressing ENTER to select it.

Press HOME MENU and select ‘Initial

Settings’.

ENTER

Initial Settings

Select ‘TV Screen’ from the ‘Video

ENTER

HOME

GMUEINDUE

RETURN

Output’ settings.

Initial Settings

Digital Audio Out

Video Output

Language

4:3 (Letter Box)

4:3 (Pan&Scan)

16:9 (Wide)

TV Screen

Component Out

HDMI Resolution

HDMI Color

Display

Options

If you have a widescreen (16:9) TV,

Button

What it does

select ‘16:9 (Wide)’.

If you have a conventional (4:3) TV, you can

change the setting from 4:3 (Letter Box) to 4:3

(Pan & Scan) if you prefer. See Video Output

settings on page 39 for more details.

HOME

Display/exit the on-screen display.

ꢀ/ꢁ/ꢂ/ꢃ Changes the highlighted menu

item.

Press HOME MENU to exit the menu

Selects the highlighted menu

item (both ENTER buttons on the

remote work in exactly the same

way).

ENTER

screen.

RETURN

Returns to the main menu

without saving changes.

Note

• From here on in this manual, the word

‘select’ generally means use the cursor

buttons to highlight an item on-screen,

then press ENTER.

Getting started

Setting the language of this

player’s on-screen displays

Playing discs

The basic playback controls for playing DVD,

CD, Video CD/Super VCD, DivX video and MP3/

WMA discs are covered here. Further functions

are detailed in the next chapter.

This sets the language of the player’s on-

screen displays.

Press HOME MENU and select ‘Initial

For details on playing JPEG picture discs, see

Viewing a JPEG slideshow on page 28.

Settings’.

Initial Settings

Important

Select ‘OSD Language’ from the

• Throughout this manual, the term ‘DVD’

means DVD-Video and DVD-R/RW. If a

function is specific to a particular kind of

DVD disc, it is specified.

‘Display’ settings.

Initial Settings

Digital Audio Out

Video Output

Language

OSD Language

Angle Indicator

English

français

Español

Display

Options

STANDBY/ON

OPEN/CLOSE

ꢄ

ꢀ

Taiwanese model only:

ENTER

Initial Settings

Digital Audio Out

Video Output

Language

OSD Language

Angle Indicator

English

Display

Options

ENTER

ꢊ/ꢋ

ꢉ

ꢏ/ꢐ

ꢎ

Select a language.

ꢅ

The on-screen language will change according

ꢃ

ꢆ

ꢇ

ꢈ

to your selection.

Press HOME MENU to exit the menu

screen.

If the player isn’t already on, press

ꢀ STANDBY/ON to switch it on.

If you’re playing a DVD, disc containing DivX

video files or Video CD/Super VCD, also turn on

your TV and make sure that it is set to the

correct video input.

Getting started

tray.

Press ꢄ OPEN/CLOSE to open the disc

Basic playback controls

The table below shows the basic controls on

the remote for playing discs. The following

chapter covers other playback features in more

detail.

Load a disc.

Load a disc with the label side facing up, using

the disc tray guide to align the disc (if you’re

loading a double-sided DVD disc, load it with

the side you want to play face down).

Button

What it does

ꢅ

Starts playback.

If the display shows RESUME or

LAST MEM playback starts from the

resume or last memory point (see

also Resume and Last Memory

below.)

ꢆ

ꢇ

Pauses a disc that’s playing, or

restarts a paused disc.

Stops playback.

more on HDMI compatibility.

• Why won’t the disc I loaded play?

Make sure the resolution on this player

matches that of the component you have

connected using HDMI. See HDMI

Resolution on page 40 to change the HDMI

resolution.

First check that you loaded the disc the

right way up (label side up), and that it’s

clean and undamaged. See Taking care of

your player and discs on page 44 for

information on cleaning discs.

If a disc loaded correctly won’t play, it’s

probably an incompatible format or disc

type, such as DVD-Audio or DVD-ROM. See

Disc / content format playback compatibility

on page 7 for more on disc compatibility.

• I have a widescreen TV so why are there

black bars at the top and bottom of the

screen when I play some discs?

Some movie formats are such that even

when played on a widescreen TV, black

bars are necessary at the top and bottom of

the screen. This is not a malfunction.

• I have a standard (4:3) TV and set the player

to show widescreen DVDs in pan & scan

format, so why do I still get black bars top

and bottom with some discs?

Some discs override the display

preferences of the player, so even if you

have 4:3 (Pan & Scan) selected, those

discs will still be shown in letter box format.

This is not a malfunction.

Playing discs

^CP^hl^aa^ptey^ri⁵ng discs

• Depending on the disc, normal playback

may automatically resume when a new

chapter is reached on a DVD disc.

Note

• Many of the functions covered in this

chapter apply to DVD discs, Video CDs/

Super VCDs, CDs, DivX video and WMA/

MP3, JPEG discs, although the exact

operation of some varies slightly with the

kind of disc loaded.

Playing in slow motion

You can play DVDs at four different slow

motion speeds, forwards and backwards.

Video CD/Super VCDs and DivX video can be

played at four different forward slow motion

speeds.

• Some DVDs restrict the use of some

functions (random or repeat, for example)

in some or all parts of the disc. This is not a

malfunction.

During playback, press ꢆ (pause).

• When playing Video CD/Super VCDs, some

of the functions are not available during

PBC playback. If you want to use them,

start the disc playing using a number

button to select a track.

Press and hold ꢊ/ꢋ or ꢏ/ꢐ until

slow motion playback starts.

• The slow motion speed is shown on-

screen.

• There is no sound during slow motion

playback.

Scanning discs

Press repeatedly to change the slow

You can fast-scan discs forward or backward at

four different speeds (DivX video only one

speed).

motion speed.

To resume normal playback, press ꢅ

(play).

During playback, press ꢉ or ꢎ to

• Depending on the disc, normal playback

may automatically resume when a new

chapter is reached.

start scanning.

• There is no sound while scanning DVDs,

DivX video and Video CD/Super VCDs.

Press repeatedly to increase the

scanning speed.

• The scanning speed is shown on-screen.

To resume normal playback, press ꢅ

(play).

• When scanning a Video CD/Super VCD

playing in PBC mode or a WMA/MP3 track,

playback automatically resumes at the end

or beginning of the track.

Playing discs

Frame advance/frame reverse

Button

What it does

You can advance or back up DVD discs frame-

by-frame. With Video CD/Super VCDs and DivX

video file you can only use frame advance.

Pauses the slideshow and rotates the

displayed picture 90º (counter)

clockwise. (Press ꢅ (play) to restart

slideshow.)

ꢂ/ꢃ

During playback, press ꢆ (pause).

Pauses the slideshow and ﬂips the

displayed picture horizontally or

vertically. (Press ꢅ (play) to restart

slideshow.)

ꢀ/ꢁ

Press ꢊ/ꢋ or ꢏ/ꢐ to reverse or

advance a frame at a time.

To resume normal playback, press ꢅ

(play).

ZOOM

Pauses the slideshow and zooms the

picture. Press again to toggle

between 1x, 2x and 4x zoom. (Press

ꢅ (play) to restart slideshow.)

• Depending on the disc, normal playback

may automatically resume when a new

chapter is reached.

Displays the Disc Navigator screen

(see below).

Viewing a JPEG slideshow

After loading a CD/CD-R/RW containing JPEG

picture files, press ꢅ(play) to start a slideshow

from the first folder/picture on the disc. The

player displays the pictures in each folder in

alphabetical order.

Note

• The time it takes for the player to load a file

increases with large file sizes.

• If the folder contains WMA/MP3 files,

playback of the slideshow and WMA/MP3

files repeats. During the audio playback,

you can still use the skip (ꢃ/ꢈ), scan

(ꢉ/ꢎ) and pause (ꢆ) functions.

Browsing DVD or Video CD/

Super VCD disc with the Disc

Navigator

Pictures are automatically adjusted so that

they fill as much of the screen as possible (if

the aspect ratio of the picture is different to

your TV screen you may notice black bars at the

sides, or at the top and bottom of the screen).

Use the Disc Navigator to browse through the

contents of a DVD or Video CD/Super VCD disc

to find the part you want to play.

While the slideshow is running:

Important

• You can’t use the Disc Navigator with

Video CD/Super VCDs in PBC mode.

Button

What it does

During playback, press HOME MENU

ꢆ

Pauses the slideshow; press again to

restart.

and select ‘Disc Navigator’ from the on-

screen menu.

ꢃ

ꢈ

Displays the previous picture.

Displays the next picture.

Disc Navigator

Playing discs

Select a view option.

You can use either the cursor buttons (ꢀ/ꢁ/

ꢂ/ꢃ) and ENTER to select a thumbnail, or the

number buttons.

Disc Navigator

Title

To select using the number buttons, enter a

Chapter

two-digit number then press ENTER.

The options available depend on the kind of

disc loaded and whether the disc is playing or

not, but include:

Tip

• Another way to find a particular place on a

disc is to use one of the search modes. See

Searching a disc on page 33.

• Title – Titles from a DVD-Video disc.

• Chapter – Chapters from the current title

of a DVD-Video disc.

Browsing WMA, MP3, DivX

video and JPEG files with the

Disc Navigator

• Track – Tracks from a Video CD/Super VCD

disc.

• Time – Thumbnails from a Video CD/Super

VCD disc at 10 minute intervals.

Use the Disc Navigator to find a particular file

or folder by filename. Note that if there are

other types of files on the same disc, these will

not be displayed in the Disc Navigator.

• Original: Title – Original titles from a VR

mode DVD-RW disc.

• Play List: Title – Playlist titles from a VR

mode DVD-RW disc.

Press HOME MENU and select ‘Disc

Navigator’ from the on-screen menu.

• Original: Time – Thumbnails from the

Original content at 10 minute intervals.

00:00/ 00:00

0kbps

• Play List: Time – Thumbnails from the

Playlist at 10 minute intervals.

The screen shows up to six moving thumbnail

images displayed one after another. To display

the previous/next six thumbnails, press ꢃ/

ꢈ (you don’t have to wait for all the

thumbnails to finish playing to display the

previous/next page).

Folder1

Folder2

Folder3

Folder4

Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ)

and ENTER to navigate.

Use the cursor up/down buttons (ꢀ/ꢁ) to

move up and down the folder/file list.

Select the thumbnail image for what

you want to play.

Use the cursor left button (ꢂ) to return to the

parent folder.

Use ENTER or cursor right (ꢃ) to open a

highlighted folder.

• You can also return to the parent folder by

going to the top of the list to the ‘..’ folder,

then pressing ENTER.

Disc Navigator: Title

01- 49: --

Playing discs

• When a JPEG file is highlighted, a

thumbnail image is displayed on the right.

Looping a section of a disc

The A-B Repeat function allows you to specify

two points (A and B) within a track (CD, Video

CD/Super VCD) or title (DVD) that form a loop

which is played over and over.

00:00/ 00:00

Folder2

0kbps

• You can’t use A-B Repeat with Video CD/

Super VCDs in PBC mode, or WMA/MP3/

DivX video files.

File1

File2

File3

File4

File5

During playback, press HOME MENU

and select ‘PLAY MODE’ from the on-screen

menu.

To play the highlighted track or DivX

video file or display the highlighted JPEG

file, press ENTER.

• When a WMA/MP3 or DivX video file is

selected, playback begins, starting with the

selected file, and continues until the end of

the folder.

Select ‘A-B Repeat’ from the list of func-

tions on the left.

DV-393 and DV-490V : During playback, press

PLAY MODE and select ‘A-B Repeat’ from the

list of functions on the left.

Play Mode

• When a JPEG file is selected, a slideshow

begins, starting with that file, and

continues to the end of the folder.

A-B Repeat

Repeat

A(Start Point)

B(End Point)

Off

Random

Program

Search Mode

Tip

• You can also play a JPEG slideshow while

listening to WMA/MP3 playback. Simply

select the audio file you want to listen to

followed by the JPEG from which you want

the slideshow to start. Playback of both the

slideshow and the audio files repeats.

Playback controls are effective for the

JPEG slideshow only.

Press ENTER on ‘A(Start Point)’ to set

the loop start point.

Press ENTER on ‘B(End Point)’ to set the

loop end point.

After pressing ENTER, playback jumps back to

the start point and plays the loop.

To resume normal playback, select ‘Off’

• To play the contents of the whole disc

rather than just the current folder, exit the

Disc Navigator and start playback using

the ꢅ (play) button.

from the menu.

Using repeat play

There are various repeat play options,

depending on the kind of disc loaded. It’s also

possible to use repeat play together with

program play to repeat the tracks/chapters in

the program list (see Creating a program list on

page 32).

Playing discs

Using random play

Important

Use the random play function to play titles or

chapters (DVD-Video), or tracks (CD, Video CD/

Super VCD) at random. (Note that the same

track/title/chapter may play more than once.)

• You can’t use Repeat play with Video CD/

Super VCDs in PBC mode, or with WMA/

MP3 discs.

• You can’t use repeat and random play at

the same time.

You can set the random play option when a

disc is playing or stopped.

During playback, press HOME MENU

and select ‘PLAY MODE’ from the on-screen

menu.

Important

• Random play remains in effect until you

select Random Off from the random play

menu options.

Select ‘Repeat’ from the list of functions

on the left.

DV-393 and DV-490V : During playback, press

PLAY MODE and select ‘Repeat’ from the list

of functions on the left.

• You can’t use random play with VR format

DVD-RW discs, Video CD/Super VCDs

playing in PBC mode, WMA/MP3 discs,

DivX video discs, or while a DVD disc menu

is being displayed.

Play Mode

A-B Repeat

Repeat

Title Repeat

Chapter Repeat

Repeat Off

• You can't use random play together with

program or repeat play.

Random

Program

Search Mode

Press HOME MENU and select ‘PLAY

MODE’ from the on-screen menu.

Select a repeat play option.

Select ‘Random’ from the list of func-

If program play is active, select Program

Repeat to repeat the program list, or Repeat

Off to cancel.

tions on the left.

DV-393 and DV-490V : Press PLAY MODE and

select ‘Random’ from the list of functions on

the left.

The repeat options available depend on the

kind of disc loaded. For example, for DVD

discs, you can select Title Repeat or Chapter

Repeat (or Repeat Off).

Play Mode

A-B Repeat

Repeat

Random Title

Random Chapter

Random Off

Random

Play Mode

Program

Search Mode

A-B Repeat

Repeat

Title Repeat

Chapter Repeat

Repeat Off

Random

Program

Search Mode

• For CDs and Video CD/Super VCDs, select

Disc Repeat or Track Repeat (or Repeat

Off).

• For DivX video discs, select Title Repeat

(or Repeat Off).

Playing discs

Select a random play option.

Press HOME MENU and select ‘PLAY

The random play options available depend on

the kind of disc loaded. For example, for DVD

discs, you can select Random Title or

Random Chapter (or Random Off).

MODE’ from the on-screen menu.

Select ‘Program’ from the list of func-

tions on the left.

DV-393 and DV-490V : Press PLAY MODE and

select ‘Program’ from the list of functions on

the left.

Play Mode

A-B Repeat

Repeat

Random Title

Random Chapter

Random Off

Play Mode

Random

Program

Search Mode

A-B Repeat

Repeat

Create/Edit

Playback Start

Playback Stop

Program Delete

Random

Program

Search Mode

• For CDs and Video CD/Super VCDs, select

On or Off to switch random play on or off.

Select ‘Create/Edit’ from the list of

program options.

Tip

Use the cursor buttons and ENTER to

• Use the following controls during random

play:

select a title, chapter or track for the

current step in the program list.

For a DVD disc, you can add a title or a chapter

to the program list.

Button

What it does

ꢈ

Selects a new track/title/chapter

at random.

Program

Program Step

Title 1~38

Chapter 1~004

ꢃ

Returns to the beginning of the

current track/title/chapter;

further presses select another

random track/title/chapter.

01. 01

02.

Title 01

Title 02

Title 03

Title 04

Title 05

Title 06

Title 07

Title 08

Chapter 001

Chapter 002

Chapter 003

Chapter 004

03.

04.

05.

06.

07.

08.

Creating a program list

• For a CD or Video CD/Super VCD, select a

track to add to the program list.

This feature lets you program the play order of

titles/chapters/tracks on a disc.

After pressing ENTER to select the title/

chapter/track, the step number automatically

moves down one.

Important

• You can’t use Program play with VR format

DVD-RW discs, Video CD/Super VCDs

playing in PBC mode, WMA/MP3 discs,

DivX video discs, or while a DVD disc menu

is being displayed.

Repeat step 3 to build up a program list.

A program list can contain up to 24 titles/

chapters/tracks.

Playing discs

• You can insert steps into the middle of a

program list by just highlighting the

position where you want the new step to

appear and entering a title/chapter/track

number.

Searching a disc

You can search DVD discs by title or chapter

number, or by time; CDs and Video CD/Super

VCDs by track number or time; DivX video discs

by time.

• To delete a step, highlight it and press

CLEAR.

Important

To play the program list, press ꢅ (play).

• Search functions are not available with

Video CD/Super VCDs in PBC mode, or

with WMA/MP3 discs.

Program play remains active until you turn off

program play (see below), erase the program

list (see below), eject the disc or switch off the

player.

During playback, press HOME MENU

and select ‘PLAY MODE’ from the on-screen

menu.

Tip

Select ‘Search Mode’ from the list of

• Use the following controls during program

play:

functions on the left.

DV-393 and DV-490V : During playback, press

PLAY MODE and select ‘Search Mode’ from

the list of functions on the left.

Button

What it does

PLAY MODE

(DV-393 and

DV-490V only) without starting playback.

Save the program list and exit

the program edit screen

Select a search mode.

The search options available depend on the

kind of disc loaded.

HOME MENU

Save the program list and exit

the program edit screen

without starting playback.

• The disc must be playing in order to use

time search.

Use the number buttons to enter a title,

ꢈ

Skip to the next step in the

program list.

chapter or track number, or a time.

Play Mode

A-B Repeat

Repeat

Title Search

Other functions available from the

Input Chapter

Chapter Search

Time Search

Random

program menu

There are a number of other options in the

program menu in addition to Create/Edit.

Program

Search Mode

• Playback Start – Starts playback of a

saved program list

• For a time search, enter the number of

minutes and seconds into the currently

playing title (DVD/ DivX video) or track (CD/

Video CD/Super VCD) you want playback to

resume from. For example, press 4, 5, 0, 0

to have playback start from 45 minutes into

the disc. For 1 hour, 20 minutes and 30

seconds, press 8, 0, 3, 0.

• Playback Stop – Turns off program play,

but does not erase the program list

• Program Delete – Erases the program list

and turns off program play

Playing discs

Press ENTER to start playback.

Note

• Some DVD discs only allow you to change

audio language from the disc menu. Press

TOP MENU or MENU to access.

Switching subtitles

Some DVD and DivX video discs have subtitles

in one or more languages; the disc box will

usually tell you which subtitle languages are

available. You can switch subtitle language

during playback.

• To set DVD audio language preferences,

see Language settings on page 40.

Zooming the screen

Press SUBTITLE repeatedly to select a

Using the zoom feature you can magnify a part

of the screen by a factor of 2 or 4, while

watching a DVD, DivX video title or Video CD/

Super VCD or playing a JPEG disc.

subtitle option.

Current / Total

Subtitle

1/2

English

During playback, use the ZOOM button

Note

to select the zoom factor (Normal, 2x or

4x).

• Some discs only allow you to change

subtitle language from the disc menu.

Press TOP MENU or MENU to access.

• Since DVD, Video CD/Super VCD, DivX

video title and JPEG pictures have a fixed

resolution, picture quality will deteriorate,

especially at 4x zoom. This is not a

malfunction.

• To set subtitle preferences, see Subtitle

Language on page 40.

• See Displaying DivX subtitle files on page 9

for more on DivX subtitles.

Use the cursor buttons to change the

zoomed area.

You can change the zoom factor and the

zoomed area freely during playback.

Switching audio language/

channels

• If the navigation square at the top of the

screen disappears, press ZOOM again to

display it.

When playing a DVD and DivX video disc

recorded with dialog in two or more languages,

you can switch audio language during

playback.

Switching camera angles

When playing a VR format DVD-RW disc

recorded with dual-mono audio, you can

switch between the main, sub, and mixed

channels during playback.

Some DVD discs feature scenes shot from two

or more angles—check the disc box for details.

When a multi-angle scene is playing, a

icon appears on screen to let you know that

other angles are available (this can be

switched off if you prefer—see Display settings

on page 41).

When playing a Video CD/Super VCD, you can

switch between stereo, just the left channel or

just the right channel.

Press AUDIO repeatedly to select an

During playback, press ANGLE to switch

audio language/channel option.

The language/channel information is shown

on-screen.

angle.

Playing discs

Displaying disc information

Various track, chapter and title information,

such as the elapsed and remaining playing

time can be displayed on-screen while a disc is

playing.

To show/switch/hide the information

displayed, press DISPLAY repeatedly.

• When a disc is playing, the information

appears at the top of the screen. Keep

pressing DISPLAY to change the displayed

information.

Audio Settings and Video Adjust menus

Chapter 6

Audio Settings and Video

Adjust menus

Audio Settings menu

Note

The Audio Settings menu offers features for

• Audio DRC is only effective with Dolby

Digital audio sources.

adjusting the way discs sound.

Press HOME MENU and select ‘Audio

• Audio DRC is only effective through the

digital output when Digital Out is set to

On, and Dolby Digital Out is set to Dolby

Digital > PCM (see Digital Audio Out

settings on page 38).

Settings’ from the on-screen display.

Audio Settings

Select and change settings using the ꢀ/

• The effect of Audio DRC also depends on

your speakers and AV receiver settings.

ꢁ/ꢂ/ꢃ (cursor) buttons, and ENTER.

Audio Settings

Equalizer

Off

Virtual Surround

• Settings: On, Off (default)

Virtual Surround

Audio DRC

Dialog

Switch on Virtual Surround to enjoy realistic

surround sound effects from just two speakers.

Tip

Audio DRC

• DV-393 and DV-490V: You can also use the

SURROUND button on the remote control

to switch Virtual Surround on.

• Settings: High, Medium, Low, Off

(default)

When watching Dolby Digital DVDs at low

volume, it’s easy to lose the quieter sounds

completely—including some of the dialog.

Switching Audio DRC (Dynamic Range

Control) to on can help by bringing up the

quieter sounds, while controlling loud peaks.

Note

• Virtual Surround doesn’t work with DTS,

through either the analog or digital

outputs.

How much of a difference you hear depends on

the material you’re listening to. If the material

doesn’t have wide variations in volume, you

may not notice much change.

• 96 kHz linear PCM audio is automatically

downsampled to 48 kHz if Virtual Surround

is switched on.

Audio Settings and Video Adjust menus

• If the player is outputting Dolby Digital,

DTS or MPEG bitstream audio (in other

words, no conversion to PCM), Virtual

Surround has no effect on the audio from

the digital output. See Digital Audio Out

settings on page 38 for how to set up the

digital output formats.

Make settings using the

ꢀ/ꢁ/ꢂ/ꢃ (cursor) buttons, and ENTER.

Video Adjust

Sharpness

Brightness

Contrast

Gamma

ꢅ

Standard

Off

Hue

Chroma Level

• How good the surround effect is varies with

the disc.

You can adjust the following picture quality

settings:

Dialog

• Sharpness – Adjusts the sharpness of

edges in the picture (Fine, Standard

(default), Soft).

• Settings: High, Medium, Low, Off

(default)

The Dialog feature is designed to make the

dialog stand out from other background

sounds in the soundtrack.

• Brightness – Adjusts the overall

brightness (–20 to +20).

• Contrast – Adjusts the contrast between

light and dark (–16 to +16).

Equalizer

• Gamma – Adjusts the ‘warmth’ of the

picture (High, Medium, Low, Off

(default)).

• Settings: Rock, Pop, Live, Dance, Techno,

Classic, Soft, Off (default)

The various preset EQ curves are designed to

suit various styles of music.

• Hue – Adjusts the red/green balance

(green 9 to red 9).

• Chroma Level – Adjusts how saturated

colors appear (–9 to +9).

Note

• 96 kHz linear PCM audio is automatically

downsampled to 48 kHz if the Equalizer is

switched on.

Adjust the Brightness, Contrast, Hue and

Chroma Level settings using the ꢂ/ꢃ (cursor

left/right) buttons.

Brightness

min

max

Video Adjust menu

From the Video Adjust screen you can adjust

various settings that affect how the picture is

presented.

Press ENTER to return to the Video

Adjust screen, or HOME MENU to exit.

Press HOME MENU and select ‘Video

Adjust’ from the on-screen display.

Video Adjust

Initial Settings menu

Chapter 7

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and

video output settings, parental lock settings,

and display settings, among others.

• The Digital Audio Out settings only need to

be set if you have connected the digital

output of this player to an AV receiver, or

other equipment.

If an option is grayed out it means that it

cannot be changed at the current time. This is

usually because a disc is playing. Stop the

disc, then change the setting.

• Check the operating instructions supplied

with your other equipment to see which

digital audio formats it’s compatible with.

• Some settings, such as TV Screen, Audio

Language and Subtitle Language may be

overridden by the DVD disc. Often these

settings can also be made from the DVD

disc menu.

Press HOME MENU and select ‘Initial

Settings’.

Initial Settings

• The HDMI Out, HDMI Resolution and

HDMI Color settings only need to be set if

you connected this player to an HDMI-

compatible component using the HDMI

connector.

Use the cursor buttons and ENTER to

select the setting and option you want to

set.

All the settings and options are explained on

the following pages.

• The Digital Audio Out, Component Out

and AV Connector Out settings cannot be

set if the player is connected to an HDMI-

compatible component using the HDMI

connector.

Note

• In the table below, the default setting is

shown in bold: other settings are shown in

italics.

Digital Audio Out settings

Setting

Option

What it means

Digital audio is output from the digital outputs.

No digital audio output.

Digital Out

Off

Dolby Digital encoded digital audio is output when playing a

Dolby Digital DVD disc.

Dolby Digital Out

Dolby Digital

Dolby Digital audio is converted to PCM audio before being

output.

Dolby Digital > PCM

Initial Settings menu

Setting

Option

DTS

What it means

DTS encoded digital audio is output when playing a DTS disc.

(Noise will be output if your amplifier/receiver is not compatible

with DTS audio.)

DTS Out

No digital audio is output when playing a DTS disc.

96 kHz digital audio is converted to 48 kHz for digital output.

96 kHz digital audio is output as is at 96 kHz.

Off

96 kHz PCM Out

MPEG Out

96kHz > 48kHz

96kHz

MPEG encoded digital audio is converted to PCM audio for

digital output.

MPEG > PCM

MPEG encoded digital audio is output as is.

MPEG

Set if your monitor or device only accepts stereo input. On this

setting multichannel audio is downmixed to 2 channels for

stereo linear PCM output. (In case of DTS source, the HDMI

audio output is turned off.)

HDMI Out*

* DV-490V only.

LPCM (2CH)

Dolby Digital, DTS and MPEG sources are processed

Auto

Off

according to how they were encoded, but if your amplifire/

monitor is not compatible with DTS audio, DTS audio output

from HDMI is turned off. Linear PCM sources are heard as is.

No digital audio output.

Video Output settings

Setting

Option

What it means

TV Screen

Set if you have a conventional 4:3 TV. Widescreen movies are

shown with black bars top and bottom.

4:3 (Letter Box)

(This setting effective for

analog and HDMI video

output. See also Screen

sizes and disc formats

on page 45.)

Set if you have a conventional 4:3 TV. Widescreen movies are

shown with the sides cropped so that the image fills the screen.

4:3 (Pan & Scan)

Set if you have a widescreen TV.

16:9 (Wide)

Interlace

Set if your TV is not compatible with progressive scan video.

Component Out

Set if your TV is compatible with progressive scan video (see

your TV’s instruction manual for details). See also Switching

the video output to interlace using the front panel controls on

page 12.

Progressive

Note that progressive scan video is only output from the

component video jacks and that there is no output from the

composite and S-video jacks when this setting is selected.

Initial Settings menu

Setting

Option

What it means

Set if your TV supports 1920 x 1080 pixel interlace video.

HDMI Resolution* 1920x1080i

(Default changes

with TV format (PAL/

Set if your TV supports 1280 x 720 pixel progressive-scan video.

1280x720p

NTSC).)

* DV-490V only.

Set if your TV supports 720 x 480 pixel (NTSC) / 720 x 576 pixel

(PAL) progressive-scan video.

720x480p (NTSC) /

720x576p (PAL)

Set if your TV supports 720 x 480 pixel (NTSC) / 720 x 576 pixel

(PAL) interlace video.

720x480i (NTSC) /

720x576i (PAL)

If colors are weak, this gives brighter colors and deeper black.

HDMI Color*

Full range RGB

RGB

(Default changes

depending on device

connected.)

Use this setting if colors appear overly rich on the Full Range

RGB setting.

Outputs component video format (default setting for HDMI-

compatible devices).

Component

* DV-490V only.

Language settings

Setting

Option

English

What it means

If there is an English soundtrack on the disc then it will be

played.

Audio Language

If there is the language selected on the disc, then it will be

played.

Languages as displayed

Other Language

Select to choose a language other than the ones displayed (see

page 47).

If there are English subtitles on the disc then they will be

displayed.

Subtitle Language English

(See also Displaying

DivX subtitle files on

page 9.)

If there is the subtitle language selected on the disc, then it will

be displayed.

Languages as displayed

Select to choose a language other than the ones displayed (see

page 47).

Other Language

DVD disc menus will be displayed in the same language as

your selected subtitle language, if possible.

DVD Menu

Lang.

w/Subtitle Lang.

Languages as displayed

Other Language

DVD disc menus will be displayed in the selected language, if

possible.

Select to choose a language other than the ones displayed (see

page 47).

Initial Settings menu

Setting

Subtitle Display

Option

What it means

Subtitles are displayed according to your selected subtitle

language (see above).

Subtitles are always off by default when you play a DVD disc

(note that some discs override this setting).

Off

Display settings

Setting

Option

What it means

On-screen displays of the player are in English.

OSD Language

English

On-screen displays are shown in the language selected.

Languages as displayed

A camera icon is displayed on-screen during multi-angle

scenes on a DVD disc.

Angle Indicator

No multi-angle indication is shown.

Off

Options settings

Setting

Option

What it means

See Parental Lock on page 42.

Parental Lock

DivX VOD

–

See About DivX® VOD content on page 43.

Display

Initial Settings menu

Parental Lock

Changing your password

To change your password, confirm your

existing password then enter a new one.

• Default level: Off; Default password: none;

Default Country/Area code: us (2119)

To give you some control over what your

children watch on your DVD player, some DVD-

Video discs feature a Parental Lock level. If

your player is set to a lower level than the disc,

the disc won’t play.

Select ‘Password Change’.

Use the number buttons to enter your

existing password, then press ENTER.

Enter a new password and press ENTER.

This registers the new password and you will

return to the Options menu screen.

Some discs also support the Country/Area

Code feature. The player does not play certain

scenes on these discs, depending on the

Country/Area Code you set.

Setting/changing the Parental Lock

Note

Select ‘Level Change’.

• Not all discs use Parental Lock, and will

play without requiring the password first.

Use number buttons to enter your

password, then press ENTER.

• If you forget your password, you’ll need to

reset the player to register a new password

(see Resetting the player on page 46).

Select a new level and press ENTER.

• Press ꢂ (cursor left) repeatedly to lock

more levels (more discs will require the

password); press ꢃ (cursor right) to

unlock levels. You can’t lock level 1.

Registering a new password

You must register a password before you can

change the Parental Lock level or enter a

Country code.

This sets the new level and you will return to the

Options menu screen.

Select ‘Options’, then ‘Password’.

Setting/changing the Country/Area

code

Initial Settings

You can find the Country/Area code list on

page 50.

Digital Audio Out

Video Output

Language

Parental Lock

DivX VOD

Password

Level Change

Country Code

Select ‘Country Code’.

Display

Options

Use number buttons to enter your

password, then press ENTER.

Select a Country/Area code and press

Use the number buttons to enter a 4-

ENTER.

digit password.

The numbers you enter show up as asterisks

(*) on-screen.

There are two ways you can do this:

• Select by code letter: Use ꢀ/ꢁ (cursor up/

down) to change the Country/Area code.

Press ENTER to register the password.

• Select by code number: Press ꢃ(cursor

right) then use the number buttons to enter

the 4-digit Country/Area code.

You will return to the Options menu screen.

Initial Settings menu

The new Country/Area code is set and you will

return to the Options menu screen. Note that

the new Country/Area code doesn’t take effect

until the next disc is loaded (or the current disc

is reloaded).

Select ‘Display’.

Your 8-digit registration code is displayed.

Initial Settings

Digital Audio Out

DivX (R) Video On Demand

Video Output

Language

Display

Your registration code is:

0 1 2 3 4 5 6 7

To learn more visit www.divx.com/vod

About DivX VOD content

Options

Done

In order to play DivX VOD (video on demand)

content on this player, you first need to register

the player with your DivX VOD content

provider. You do this by generating a DivX VOD

registration code, which you submit to your

provider.

Make a note of the code as you will need it

when you register with a DivX VOD provider.

Playing DivX VOD content

Important

Some DivX VOD content may only be playable

a fixed number of times. When you load a disc

containing this type of DivX VOD content, the

remaining number of plays is shown on-screen

and you then have the option of playing the

disc (thereby using up one of the remaining

plays), or stopping. If you load a disc that

contains expired DivX VOD content (for

example, content that has zero remaining

plays), the message Rental Expired is

displayed.

• DivX VOD content is protected by a DRM

(Digital Rights Management) system. This

restricts playback of content to specific,

registered devices.

• If you load a disc that contains DivX VOD

content not authorized for your player, the

message Authorization Error is displayed

and the content will not play.

• Resetting the player (as described in

Resetting the player on page 46) will not

cause you to lose your registration code.

If your DivX VOD content allows an unlimited

number of plays, then you may load the disc

into your player and play the content as often

as you like, and no message will be displayed.

Displaying your DivX VOD

registration code

Press HOME MENU and select ‘Initial

Settings’.

Select ‘Options’, then ‘DivX VOD’.

Initial Settings

Digital Audio Out

Video Output

Language

Parental Lock

DivX VOD

Display

Options

Additional information

Chapter 8

Additional information

This player is designed to be used only with

Taking care of your player and

discs

conventional, fully circular discs. Do not use

shaped discs. Pioneer disclaims all liability

arising in connection with the use of shaped

discs.

General

Hold discs by the edge or by the center hole

and edge.

Cleaning discs

Fingerprints and dust on discs can affect

playback performance. Clean using a soft, dry

cloth, wiping the disc lightly from the center to

the outside edge as shown below.

When you're not using a disc, return it to its

case and store upright. Avoid leaving discs in

excessively cold, humid, or hot environments

(including under direct sunlight).

Don't glue paper or put stickers on to discs. Do

not use a pencil, ball-point pen or other sharp-

tipped writing instrument to write on the disc.

If necessary, use a cloth soaked in alcohol, or a

commercially available CD/DVD cleaning kit to

clean a disc more thoroughly. Never use

benzine, thinner or other cleaning agents,

including products designed for cleaning vinyl

records.

Don’t use self-adhesive disc labels on discs as

these can cause the disc to warp slightly

during playback causing distortion in the

picture and/or sound.

Damaged and shaped discs

Do not use cracked, chipped, warped, or

otherwise damaged discs as they may damage

the player.

Cleaning the unit’s exterior

Unplug the unit before cleaning.

Use a dry cloth to wipe off dust and dirt. If the

surfaces are very dirty, wipe with a soft cloth

dipped in some neutral cleanser diluted five or

six times with water and wrung out well, then

wipe again with a dry cloth.

Do not use furniture wax or cleaners. Never

use thinners, benzine or insecticide sprays or

other chemicals on or near this unit.

Additional information

If you use a chemical-impregnated cleaning

cloth, read the instructions carefully before

use. These cloths may leave smear marks on

half-mirror finish surfaces; if this happens,

finish with a dry cloth.

Widescreen TV users

If you have a widescreen TV, the TV Screen

setting (page 39) of this player should be set to

16:9 (Wide).

When you watch discs recorded in 4:3 format,

you can use the TV controls to select how the

picture is presented. Your TV may offer various

zoom and stretch options; see the instructions

that came with your TV for details.

Cleaning the pickup lens

The DVD player’s lens should not become dirty

in normal use, but if for some reason it should

malfunction due to dust or dirt, consult your

nearest Pioneer-authorized service center. We

do not recommend using commercially

available lens cleaners for CD players.

Please note that some movie aspect ratios are

wider than 16:9, so even though you have a

widescreen TV, these discs will still play in a

‘letter box’ style with black bars at the top and

bottom of the screen.

Condensation

Condensation may form inside the player if it is

brought into a warm room from outside, or if

the temperature of the room rises quickly.

Although the condensation won’t damage the

player, it may temporarily impair its

performance. Leave it to adjust to the warmer

temperature for about an hour before

switching on.

Standard TV users

If you have a standard TV, the TV Screen

setting (page 39) of this player should be set to

4:3 (Letter Box) or 4:3 (Pan&Scan),

depending on which you prefer.

Set to 4:3 (Letter Box), widescreen discs are

shown with black bars top and bottom.

Moving the player

If you need to move the player, first press

ꢀ STANDBY/ON on the front panel to turn the

player off. Wait for -OFF- to disappear from the

display, then unplug the power cable. Never lift

or move the unit during playback—discs rotate

at a high speed and may be damaged.

Set to 4:3 (Pan&Scan), widescreen discs are

shown with the left and right sides cropped.

Although the picture looks larger, you don’t

actually see the whole picture.

Screen sizes and disc formats

DVD-Video discs come in several different

screen aspect ratios, ranging from TV

programs, which are generally 4:3, to

CinemaScope widescreen movies, with an

aspect ratio of up to about 7:3.

Please note that many widescreen discs

override the player’s settings so that the disc is

shown in letter box format regardless of the

setting.

Televisions, too, come in different aspect

ratios; ‘standard’ 4:3 and widescreen 16:9.

Additional information

Note

Disc

Player setting

• Using the 16:9 (Wide) setting with a

standard 4:3 TV, or either of the 4:3 settings

with a widescreen TV, will result in a

distorted picture.

Type

Format NTSC PAL AUTO

DVD/Super

VCD/Video CD/

DivX Video

NTSC

PAL

NTSC PAL NTSC

NTSC PAL PAL

Setting the TV system

CD/MP3/WMA/

JPEG

no disc

NTSC

NTSC PAL

(Except Taiwanese model)

—

or PAL

The default setting of this player is AUTO, and

unless you notice that the picture is distorted

when playing some discs, you should leave it

set to AUTO. If you experience picture distor-

tion with some discs, set the TV system to

match your country or region’s system. Doing

this, however, may restrict the kinds of disc you

can watch. The table below shows what kinds

of disc are compatible with each setting

(AUTO, PAL and NTSC).

Resetting the player

Use this procedure to reset all the player’s

settings to the factory default.

Switch the player into standby.

Using the front panel buttons, hold

down the ꢇ (stop) button and press

ꢀ STANDBY/ON to switch the player back

on.

If the player is on, press ꢀ STANDBY/

ON to switch it to standby.

All the player’s settings are now reset.

Using the front panel controls, hold

down ꢈ then press ꢀ STANDBY/ON to

switch the TV system.

DVD-Video regions

All DVD-Video discs carry a region mark on the

case somewhere that indicates which

The TV system changes as follows:

• AUTO ꢄ NTSC

• NTSC ꢄ PAL

• PAL ꢄ AUTO

region(s) of the world the disc is compatible

with. Your DVD player also has a region mark,

which you can find on the rear panel. Discs

from incompatible regions will not play in this

player. In this case the attention sentence

“Incompatible disc region number Can't play

disc” is displayed on screen. Discs marked ALL

will play in any player.

Note

• You have to switch the player into standby

(press ꢀ STANDBY/ON) before each

change.

Additional information

The diagram below shows the various DVD

regions of the world.

Selecting languages using the

language code list

Some of the language options (such as ‘DVD

Menu Lang.’ in the Setup Navigator) allow you

to set your preferred language from any of the

136 languages listed in the language code list

on page 50.

Select ‘Other Language’.

Use the ꢂ/ꢃ(cursor left/right) buttons

to select either a code letter or a code

number.

Use the ꢀ/ꢁ (cursor up/down) buttons

to select a code letter or a code number.

See Language code list on page 50 for a

complete list of languages and codes.

HDMI troubleshooting (DV-490V)

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is

something wrong with this component, check the points below. Sometimes the trouble may lie in

another component. Inspect the other components and electrical appliances being used. If the

trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized

service center or your dealer to carry out repair work.

Problem

Remedy

No HDMI audio output.

• This unit has been designed to be compliant with HDMI (High

Deﬁnition Multimedia Interface). Depending on the component you

have connected, unreliable signal transfers may result.

• If the front panel HDMI indicator is lit:

– You won’t hear any sound from the HDMI output if the source

component is only DVI/HDCP-compatible.

• If the front panel HDMI indicator is unlit then:

– Make sure that you’ve selected this player as the HDMI input in the

settings for the component you’re using. You may need to refer to the

instruction manual of the component to do this.

– Check that the HDMI cable is connected properly and that the cable

isn’t damaged.

– Check that components connected using the HDMI interface are

switched on and HDMI compatible.

Additional information

Problem

Remedy

No HDMI video output.

• Make sure that you’ve selected this player as the HDMI input in the

settings for the component you’re using. You may need to refer to the

instruction manual of the component to do this.

• Check that the HDMI cable is connected properly and that the cable

isn’t damaged.

• Check that components connected using the HDMI interface are

switched on and HDMI compatible.

• This unit has been designed to be compliant with HDMI (High

Deﬁnition Multimedia Interface). Depending on the component you

have connected, using a DVI connection may result in unreliable

signal transfers.

• Make sure the resolution on this player matches that of the

component you have connected using HDMI. See HDMI Resolution

on page 40 to change the HDMI resolution. See Resetting the output

resolution to the default setting with HDMI connection on page 15 if

you want to reset the output resolution.

No multichannel HDMI

audio.

• Make sure the HDMI Out setting is set to Auto (see HDMI Out on

page 39 to do this).

A connected DVI

• This unit has been designed to be compliant with HDMI (High

component (with HDCP) Deﬁnition Multimedia Interface). Depending on the component you

doesn’t work with this

player.

have connected, using a DVI connection may result in unreliable

signal transfers.

Note

• Static electricity or other external influences may cause malfunctioning of this unit. In this

case, unplug the power cord and then plug back in. This will usually reset the unit for proper

operation. If this does not correct the problem, please consult your nearest Pioneer service

center.

DivX^*1

Glossary

DivX is a media technology created by

DivX, Inc. DivX media files contain

compressed video. DivX files can also

include advanced media features like

menus, subtitles, and alternate

audiotracks.

Analog audio Direct representation of sound by an

electrical signal. See also Digital audio.

Aspect ratio The width of a TV screen relative to its

height. Conventional TVs are 4:3;

Dolby

Digital^*2

A multi-channel audio encoding system

developed by Dolby Laboratories that

enables far more audio to be stored on a

disc than PCM encoding. See also PCM

(Pulse Code Modulation).

widescreen models are 16:9.

Digital audio Indirect representation of sound using

numbers. See also Sampling frequency

and Analog audio.

Additional information

DRM

DRM (digital rights management) copy

protection is a technology designed to

prevent unauthorized copying by

restricting playback, etc. of compressed

audio files on devices other than the PC

(or other recording equipment) used to

record it. For detailed information,

please see the instruction manuals or

help files that came with your PC and/or

software.

PBC

(PlayBack

Control)

A system of navigating a Video CD/

Super VCD through on-screen menus

recorded onto the disc.

PCM

Digital audio encoding system found on

(Pulse Code CDs. Good quality, but requires a lot of

Modulation) data compared to Dolby Digital, DTS

and MPEG encoded audio. See also

Digital audio.

Progressive All the lines that make up a video

scan video

picture are updated in one pass

(compared to interlace which takes two

passes to update the whole picture).

DTS^*3

EXIF

A multi-channel audio encoding system

developed by Digital Theater Systems

that enables far more audio to be stored

on a disc than PCM encoding. See also

PCM (Pulse Code Modulation).

Regions

These associate DVD-Video discs and

players with particular areas of the

world. See DVD-Video regions on

page 46 for more information.

A file format developed by Fuji Photo

(Exchangeable Film for digital still cameras. Digital

Image File)

cameras from various manufacturers

use this compressed file format which

carries date, time and thumbnail

Sampling

frequency

The rate at which sound is measured to

be turned into digital audio data. The

higher the rate, the better the sound

quality. CD is 44.1 kHz; DVD can be up

to 96 kHz. See also Digital audio.

information, as well as the picture data.

File

extension

A tag added to the end of a filename to

indicate the type of file. For example,

“.mp3” indicates an MP3 file.

WMA

WMA is short for Windows Media Audio

and refers to an audio compression

technology developed by Microsoft

Corporation. Files are recognized by

their file extension “.wma”.

Microsoft, Windows Media, and the

Windows logo are trademarks, or

registered trademarks of Microsoft

Corporation in the United States and/or

other countries.

HDMI^*4(DV-

490V only)

HDMI (High-Definition Multimedia

Interface) is a high-speed digital

interface which has the capability to

support standard, enhanced, or high-

definition video plus standard to multi-

channel surround-sound audio on a

single digital connection. HDMI

features include uncompressed digital

video, a bandwidth of up to 5 gigabytes

per second and communication

between the AV source and AV devices

such as DTVs.

DivX, DivX Certified, and associated logos are

trademarks of DivX, Inc. and are used under

license.

ISO 9660

format

International standard for the volume

and file structure of CD-ROM discs.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

JPEG

A standard file format used for still

images. JPEG files are identified by the

file extension “.jpg”.

“DTS” and “DTS Digital Out” are registered

trademarks of Digital Theater Systems, Inc.

MP3

MP3 (MPEG1 audio layer 3) is a

compressed stereo audio file format.

Files are recognized by their file

extension “.mp3”.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC.

MPEG audio An audio format used on Video CD/

Super VCDs and some DVD discs.

Additional information

Language code list

Language (Language code letter), Language code

Japanese (ja), 1001

English (en), 0514

French (fr), 0618

German (de), 0405

Italian (it), 0920

Spanish (es), 0519

Chinese (zh), 2608

Dutch (nl), 1412

Portuguese (pt), 1620

Swedish (sv), 1922

Russian (ru), 1821

Korean (ko), 1115

Greek (el), 0512

Bhutani (dz), 0426

Esperanto (eo), 0515

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Finnish (fi), 0609

Fiji (fj), 0610

Faroese (fo), 0615

Frisian (fy), 0625

Kirghiz (ky), 1125

Latin (la), 1201

Lingala (ln), 1214

Laothian (lo), 1215

Lithuanian (lt), 1220

Latvian (lv), 1222

Sinhalese (si), 1909

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Somali (so), 1915

Albanian (sq), 1917

Serbian (sr), 1918

Siswati (ss), 1919

Sesotho (st), 1920

Sundanese (su), 1921

Swahili (sw), 1923

Tamil (ta), 2001

Malagasy (mg), 1307

Maori (mi), 1309

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Moldavian (mo), 1315

Marathi (mr), 1318

Malay (ms), 1319

Maltese (mt), 1320

Burmese (my), 1325

Nauru (na), 1401

Nepali (ne), 1405

Norwegian (no), 1415

Occitan (oc), 1503

Oromo (om), 1513

Oriya (or), 1518

Irish (ga), 0701

Scots-Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Hausa (ha), 0801

Hindi (hi), 0809

Croatian (hr), 0818

Hungarian (hu), 0821

Armenian (hy), 0825

Interlingua (ia), 0901

Interlingue (ie), 0905

Inupiak (ik), 0911

Indonesian (in), 0914

Icelandic (is), 0919

Hebrew (iw), 0923

Yiddish (ji), 1009

Javanese (jw), 1023

Georgian (ka), 1101

Kazakh (kk), 1111

Greenlandic (kl), 1112

Cambodian (km), 1113

Kannada (kn), 1114

Kashmiri (ks), 1119

Kurdish (ku), 1121

Afar (aa), 0101

Telugu (te), 2005

Tajik (tg), 2007

Thai (th), 2008

Abkhazian (ab), 0102

Afrikaans (af), 0106

Amharic (am), 0113

Arabic (ar), 0118

Assamese (as), 0119

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Byelorussian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Bislama (bi), 0209

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Catalan (ca), 0301

Corsican (co), 0315

Czech (cs), 0319

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Setswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Panjabi (pa), 1601

Polish (pl), 1612

Pashto, Pushto (ps), 1619 Twi (tw), 2023

Quechua (qu), 1721

Rhaeto-Romance (rm), 1813 Urdu (ur), 2118

Ukrainian (uk), 2111

Kirundi (rn), 1814

Uzbek (uz), 2126

Vietnamese (vi), 2209

Volapük (vo), 2215

Wolof (wo), 2315

Xhosa (xh), 2408

Yoruba (yo), 2515

Zulu (zu), 2621

Romanian (ro), 1815

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sindhi (sd), 1904

Sangho (sg), 1907

Serbo-Croatian (sh), 1908

Welsh (cy), 0325

Danish (da), 0401

Country/Area code list

Country/Area, Country/Area code, Country/Area code letter

Argentina, 0118, ar

Australia, 0121, au

Austria, 0120, at

Belgium, 0205, be

Brazil, 0218, br

Canada, 0301, ca

Chile, 0312, cl

Finland, 0609, fi

France, 0618, fr

Germany, 0405, de

Hong Kong, 0811, hk

India, 0914, in

Indonesia, 0904, id

Italy, 0920, it

Malaysia, 1325, my

Mexico, 1324, mx

Netherlands, 1412, nl

New Zealand, 1426, nz

Norway, 1415, no

Pakistan, 1611, pk

Philippines, 1608, ph

Portugal, 1620, pt

Singapore, 1907, sg

Spain, 0519, es

Sweden, 1905, se

Switzerland, 0308, ch

Taiwan, 2023, tw

Thailand, 2008, th

United Kingdom, 0702, gb

USA, 2119, us

China, 0314, cn

Japan, 1016, jp

Denmark, 0411, dk

Korea, Republic of, 1118, kr Russian Federation, 1821, ru

Additional information

Specifications

HDMI output (DV-490V)

HDMI output . . . . . . . . . . . . . . . . . . . . . . . . 19 pin

General

Digital audio characteristics

Frequency response . . . . . . . . . . 4 Hz to 44 kHz

(DVD fs: 96 kHz)

S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .115 dB

Dynamic range . . . . . . . . . . . . . . . . . . . . . . .88 dB

Total harmonic distortion. . . . . . . . . . . . 0.0065 %

Wow and flutter . . . . . . . .Limit of measurement

System . . . . . . . . . . . . . . . . . . . . . . . . DVD player

Power requirements

. . . . . . . . . . . . . . AC 110–127/ 220–240 V, 50/60 Hz

Power consumption . . . . . . . . . . . . . . . . . . . .7 W

Power consumption (standby) . . . . . . . . . 0.7 W

(DV-490V-S, DV-490V-K, DV-393-S)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 W

(DV-595K-S)

(

0.001 % W. PEAK) or lower

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7kg

Digital output

Coaxial digital output . . . . . . . . . . . . . . .RCA jack

Optical digital output . . . . . . .Optical digital jack

Dimensions

. . . .420 (W) mm x 49.5 (H) mm x 215.5 (D) mm

(DV-490V-S, DV-490V-K, DV-393-S)

. . . . . 420 (W) mm x 49.5 (H) mm x 221 (D) mm

(DV-595K-S)

Accessories

Audio/video cable. . . . . . . . . . . . . . . . . . . . . . . . 1

Power cable

Operating temperature . . . . . . +5 °C to +35 °C

Operating humidity . . . . . . . . . . . . . . 5 % to 85 %

(no condensation)

Central American, South American and

Taiwan model . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1

AA/R6P dry cell batteries . . . . . . . . . . . . . . . . . 2

Front panel button names sticker

(Singapore/Taiwan models only) . . . . . . . . . . 1

Remote control overlay

Component video output

Y (luminance) - Output level . . . . . . 1 Vp-p (75 Ω)

(color) - Output level . . . . . . . 0.7 Vp-p (75 Ω)

Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA

(Singapore/Taiwan models only) . . . . . . . . . . 1

Operating Instructions

S-video output

Y (luminance) - Output level . . . . . . 1 Vp-p (75 Ω)

C (color) - Output level . . . . . . 286 mVp-p (75 Ω)

Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-video

The specifications and design of this product are subject to

change without notice, due to improvement.

Video output

Output level . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω)

Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA

Audio output (1 stereo pair)

Output level . . . . . . . . . . . . .During audio output

200 mVrms (1 kHz, –20 dB)

Number of channels . . . . . . . . . . . . . . . . . . . . . . 2

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA

Published by Pioneer Corporation.

J2I81701B SH 06/04

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

K002_A_En

<06D00001>

Printed in Thailand

<VRB1444-B>

Peavey Fan DTH 4 User Manual
Pentax Camera Lens C70210HK User Manual
Pentax Digital Camera 16811 User Manual
Philips Home Theater System HTS3010 User Manual
Planet Technology Network Card ENW 9604 User Manual
Plustek Scanner Plustek User Manual
Polaroid Film Camera Macro 3 SLR User Manual
Polk Audio Speaker System SR52505 User Manual
Poulan Tiller HDF550N User Manual
Power Acoustik Stereo Amplifier CPT2 1500 User Manual