OPERATING INSTRUCTIONS
TLM-1503 / TLM-1703
INTRODUCTION
Product Description
Congratulations on purchasing your new 15”, 17” TLM monitor. Your LCD
monitor incorporates a high quality display into a small light weight module. It has
power-saving capabilities and emits no X-ray radiation.
This LCD monitor incorporates 15”, 17” color active matrix thin-film transistor
(TFT) liquid crystal display to provide superior display performance. A maximum
resolution of 1280 x 1024 SXGA is ideal for displaying complex graphics and high
definition images. Additional features that enhance this LCD monitor’s
performance are Plug & Play compatibility, audio system, and OSD (On Screen
Display) controls.
Package Contents
ꢀ 15” or 17” TFT LCD monitor
ꢀ 15 pin D-sub signal cable
ꢀ AC power cable
ꢀ Operating Instructions
Product Features
ꢀ High contrast color TFT LCD display supports resolution up to 1280 x 1024
SXGA for 17” & 1024x768 XGA for 15”.
ꢀ Compatible with IBM, VGA, VESA, and Macintosh standards.
ꢀ Imbedded audio system provides high performance.
ꢀ BNC video input and Loop through output
ꢀ DIN S-Video input and Loop through output
ꢀ RCA Audio inputs and outputs
Page 2
CLEANING
ꢀ Gently wipe your screen with a clean camel hair brush or a soft, clean, lint-free
cloth
ꢀ Gently apply pressure to the screen surface to clean display
ꢀ Do not spray ANY liquid directly on the screen or casing of the LCD monitor
ꢀ Chemical cleaners have been reported to damage the screen or the LCD monitor
PRECAUTIONS
ꢀ Do not block vent holes with any objects
ꢀ Do not insert sharp objects or spill hazardous material onto the LCD (may cause
fire, electric shock, or failure
ꢀ Disconnect the power plug from the AC outlet if you anticipate infrequent use
ꢀ Do not attempt to service this product yourself. Opening or removing casing
may expose you to dangerous voltage points or other significant risks
ꢀ Avoid touching the screen directly with your fingers as the oils from your skin
may be difficult to remove from the LCD
ꢀ Do not apply direct pressure on the screen
ꢀ Do not remove or modify any prongs from the power cord
ꢀ Disconnect the power plug from the AC outlet when the power cord or plug is
damaged
ꢀ If the monitor case is damaged or the monitor malfunctions, do not try to repair
yourself. Un-authorized repair will void your product warranty
ꢀ Do not allow any object to rest on the power cord
ꢀ Do not place this product in a high traffic environment where cord is exposed
ꢀ Always use the proper power cord with the correct plug adapter. If the power
source is 120V AC, use a power cord that has UL and C-UL approvals. If the
power source is 240V AC, use the tandem (T-blade) plug with a grounding that
meets European country safety regulations (such as VDE for Germany)
ꢀ Do not overload wall outlets or power cords. Ensure total units plugged into
wall does not exceed 10 amperes
ꢀ Ensure total current plugged into the extension cord does not exceed cords
current rating
ꢀ Place monitor in a well ventilated environment
ꢀ Do not place monitor directly under sunlight or in cold, humid environments
ꢀ Keep monitor in a dust-free environment and away from strong electro-
magnetic fields
Page 3
CONTROL FUNCTION
Front View
1. Light sensor Compensate light output to optimize brightness
2. Channel
3. OSD menu
4. Decrease
Select input mode: VGA>VIDEO>S-VIDEO>VGA>…
Selects OSD control options on the screen
Decreases the value of selected OSD control option and
decreases the volume
5. Increase
Increases the value of selected OSD control option and
increases the volume
6. Power switch Turns power on/off
7. Power LED
Indicates different status when unit operates in different modes
8. Infrared Receiver
Page 4
OSD CONTROL
ENG
SPA
GER
ITA
FRE
CHI
MAIN MENU
SXGA IN: 1280 X 1024
H. SYNC: -48.3KHz
V. SYNC: -63.8Hz
BRIGHTNESS
CONTRAST
COLOR TEMPERATURE
LANGUAGE
OSD ADJUST
AUDIO CONTROL
INPUT SELECTION
RECALL
MUTE
OFF
ON
VOLUME
RECALL
RETURN
VGA IN
EXIT
VIDEO IN
S-VIDEO
RETURN
DISPLAY ADJUST
V-POSITION
H-POSITION
PITCH
050
080
050
058
000
PHASE
SHARPNESS
AUTO BRIGHTNESS OFF
AUTO TUNING
RECALL
RETURN
VIDEO ADJUST
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
HUE
050
050
050
000
050
ASPECT RATIO STANDARD/4:3
INPUT SELECT
RECALL
EXIT
Note: There is no “ASPECT RATIO” for 15” model.
Page 5
BRIGHTNESS:
CONTRAST:
H. POSITION:
V. POSITION:
PITCH:
Adjusts background black level of the screen image
Adjusts foreground white level of the screen image
Moves the screen image left or right
Moves the screen image up or down
Adjusts image distortion appearing as vertical bars or
“noise” on the screen
PHASE:
Adjusts image distortion appearing as horizontal bars or
“noise” on the screen
SHARPNESS:
COLOR METER:
LANGUAGE:
Adjusts the clarity and focus of the screen image
Adjusts color temperature
Allows you to choose from English, French, German,
Italian, or Spanish
AUDIO CONTROL:
Switch muting ON/OFF and controls volume
INPUT SELECTION: Selects VGA, VIDEO, S-VIDEO signal inputs
RECALL:
Returns all controls back to default settings
HOT KEY CONTROL
1. VGA HOT KEY
UP KEY > BRIGHTNESS
DOWN KEY > CONTRAST
2. VGA + HOT KEY
UP KEY > VOLUME INCREASE
DOWN KEY > VOLUME DECREASE
Page 6
INPUTS/OUTPUTS
1. AC POWER INPUT:
2. AUDIO INPUT/OUTPUT:
AC inlet for 110/220V power system
Audio signal can be input into RCA sockets
and loop through out
3. PC INPUT:
This D-Sub 15 socket can be connected to a
PC or DVR
4. S-VIDEO INPUT/OUTPUT:
5. VIDEO INPUT/OUTPUT:
S-Video signal can be input into this DIN
socket and loop through out
Composite video signal can be input in this
BNC socket and loop through out
DISPLAY ANGLE
Page 7
The TLM-1503 / TLM-1703 can be manually adjusted to desirable angles.
Page 8
PRODUCT SPECIFICATIONS
LCD Display
Pixel pitch
15” or 17" active matrix TFT LCD panel
15” 0.297(H) x 0.297(V)mm
17” 0.264(H) x 0.264(V)mm
Max.
15” - 1024(H) x 768(V) XGA
17” - 1280(H) x 1024(V) SXGA
448(V) x 430(H) x 200(D) mm
475(V) x 475(H) x 220(D) mm
Resolution
Dimensions
Packing
Dimensions
Contrast Ratio 500:1 (Typ.)
Brightness
Display Color
Viewing Angle
L/R
15” - 400 Nit / 17” - 430Nit
16.2M
15” 140o (Typ.) / 17” 140 o (Typ.)
125 o (Typ.) /
130 o (Typ.)
U/D
RGB analog 0.7Vp-p TTL positive or negative
Composite, Y/C
15” VGA / SVGA / XGA
I/O interface
Video Sync.
Display Mode
17” VGA / SVGA / XGA / SXGA
15 MIN d-SUB, s-Video connector,
BNC video connector
PC connector
Front control
Power on/off with LED, Menu select, Up/Down
adjustment, Auto tuning, Light sensor
Contrast, Brightness, Auto tuning, Phase, H-
Position, V-Position, Input selection
AC Input: 100~240V/1.8A, 50-60Hz
Humidity: 20%~80%
OSD
adjustment
Power supply
Operating
conditions
Storage
conditions
Certification
Weight
Temperature: 0 o C ~ 40 o C
Humidity: 10% ~ 90%
Temperature: -20 o C ~ 60 o C
FCC, CE, UL, CUL
N/W: 6.5Kgs G/W: 8kgs
Page 9
DISPLAY MODES
Model
0
Resolution
720 x 350
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
H Freq (kHz)
31.469
31.469
35.000
37.861
37.500
31.469
35.156
37.879
48.077
46.875
49.750
48.363
56.476
58.038
60.023
64.000
80.000
V Freq (kHz)
70.087
59.940
66.667
72.809
75.000
70.087
56.250
60.317
72.188
75.000
74.500
60.004
70.069
71.918
75.029
60.000
75.000
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*15
*16
Note: *Only 17” can support up to 1280x1024
SERVICE INFORMATION
If you experience problems with this product, please contact us at (800) 829-2850
or (310) 637-2105 and ask for:
Gale Kroth, Service Rep ext. 242
Larry Chen, Service manager, ext. 216
Page 10
OPTION RACK MOUNT KIT: TRK-1703C
19” EIA STANDARD OPEN RACK
Page 11
TATUNG COMPANY OF AMERICA
2850 El Presidio Street
Long Beach, CA 90810
(800) 827-2850
|