BT229 Bluetooth®
Headset User’s Guide
Also in this package:
AC (indoor) power adapter
Extra ear cushion
or call our Customer Service line at 800-292-2294.
What the buttons do
The headset initiates the function only after the button is released.
Press & hold it for
Press it to
2 seconds to
4 seconds to
MFB
Multi-function button (
)
In standby: Redial the most recently
dialed number.
During an incoming call: Answer the call.
During a call: Hang up.
In standby: Activate voice dialing.
During an incoming call: Reject the call.
During a call: Transfer the call to your
phone (or back).
Turn the
headset on
or off.
Press & hold it for
Press it to
2 seconds to
4 seconds to
Up
Volume
During a call: Increase
the call volume.
During a call-waiting call: Put the active
call on hold and switch to the waiting call.
NA
DoWn
Volume
During a call: Decrease During a call: Mute the During a call-waiting call: Hang up the
the call volume. microphone. active call and switch to the waiting call.
ꢁ
Setting Up Your Headset
Charge the battery
► Before using your headset, charge the battery until the red LED is solid on (about ꢀ hours).
Charging the battery completely (and keeping it charged) will help you get the longest possible
talk and standby time out of the battery.
► Connect the adapter to the power connector on the top of the headset, then plug it into any
standard 1ꢀ0 V AC (regular indoor) power outlet.
► When the battery needs to be recharged, you will hear warning beeps every ꢀ0 seconds and see
the red LED (depending on your headset status).
Use ONLY the AC adapter supplied with the headset! Using any other adapter could
damage your headset, create a fire hazard, or cause a risk of electric shock!
pair the headset to your Bluetooth phone
Pairing is like “introducing”two Bluetooth devices and giving them permission to connect
to each other. If you want to use the headset with more than one phone, you need to pair
it with each phone separately. Once you pair a phone to the headset, the two devices can
connect automatically whenever they can detect each other.
ꢂ
1) Make sure the headset is powered off and the power adapter is not connected (you can’t use the
headset while it’s charging).
MFB
ꢀ) Press and hold
until the LED flashes alternating red and blue (approximately 6 seconds),
then release. The headset is in pairing mode and should be visible to other Bluetooth devices.
ꢁ) On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may
take several seconds, and it will be different for each phone; see your phone’s manual for
detailed instructions.)
ꢂ) Your phone should discover a device called a BT229 or BT229 headset, When your phone asks if
you want to pair with this device, answer yes.
0000
5) When your phone prompts you for a PIN code or password to pair with the BTꢀꢀ9 enter
.
6) When the headset is paired, the blue LED flashes twice every 5 seconds; your phone might also
display a confirmation message.
If the blue LED flashes once every 5 seconds, the headset is
not paired. Try the pairing procedure again.
5
Connect to your phone
Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset
off and back on. If headset still won’t connect, check your phone’s owner’s manual for
additional Bluetooth information.
Once the headset is paired:
► Whenever you turn the headset on, it will automatically try to connect to whatever device it was
connected to last.
► If the headset loses the connection (e.g., if your phone is out of range), it should reconnect
MFB
automatically. To manually reconnect, press
.
Using Your Headset
MFB
until the blue LED flashes and
Turning the
To turn the headset on, press and hold
you hear the turn-on melody (about ꢂ seconds).
headset on
MFB
until the red LED flashes and you hear the turn-off
Turning the
headset off
Press and hold
melody (about ꢂ seconds).
6
put your headset on
Insert the ear cushion, then
wrap the earhook behind
your ear.
Place the
hook
behind
your
ear.
Everyone’s ear has a sweet
spot, a particular angle
of the speaker where the
audio comes in loud and
clear. Take a few minutes to
Put the
cushion in
your ear.
move the headset around until you find the best angle for the ear cushion.
Wearing the headset
on your left ear:
If you want to wear the headset
on your left ear, take the
earhook off and turn it over.
ꢃ
Available Features
After the headset is connected, you can use the following features:
Make the call from your mobile phone as usual; your phone should automatically
MFB
Make a call send the call to the headset; if it doesn’t, press and hold
send the call to the headset manually.
for ꢀ seconds to
MFB
Answer a call While the phone is ringing, press
.
MFB
.
End a call
Press
MFB
Reject an
While the phone is ringing, press and hold
for at least ꢀ seconds. Wait until
incoming call you hear a beep before you release the button.
MFB
headset (and back).
Press and hold
for ꢀ seconds to transfer the current call from your phone to
Transfer a call
Redial the
MFB
With the phone in standby, press
last number number you dialed from your phone.
. The headset automatically dials the last
for ꢀ seconds. The headset plays a melody
DoWn
During a call, press and hold
Mute the
microphone
every 10 seconds to remind you the microphone is muted and the caller can’t
Up DoWn
hear you. To turn the microphone back on, press either or
.
ꢄ
Call Waiting
To use this feature, you must subscribe to Call Waiting through your service
provider, and your phone must support the hands-free profile.
Up
► To put your current call on hold and switch to a waiting call, press and hold until you hear ꢁ
beeps (about ꢂ seconds). When you release the button, you’ll be connected to the waiting call.
Up
(Press and hold again to switch back to the original call.)
DoWn
► To hang up your current call and switch to a waiting call: press and hold
seconds. Wait until you hear ꢁ beeps, then release the button.
for about ꢂ
Voice-activated dialing
To use this feature, your phone must support voice dialing, and
all voice commands must already be programmed.
MFB
► To activate voice dialing, make sure your phone is in standby. Then, press and hold
you hear a beep (about ꢀ seconds).
until
► Use your pre-programmed voice commands as you would with your phone. (For best results, try
recording your voice tags through your headset. )
9
Using the Multipoint Function
The headset supports simultaneous connection with ꢀ mobile phones with full control of
each one. (This feature may not be compatible with some mobile phones.)
pairing to more than one phone
Pair the headset to the first phone following the instructions on page 6. When you hear a
high-pitched, short double-beep, pair the headset to the second phone.
Using both phones
► The headset stays connected to both phones until a call comes in. If you answer the call, the
headset automatically disconnects from the other phone while the call is active. When you hang
up, the headset automatically reconnects to the other phone.
► Only one phone at a time can be on an active call.
► The headset plays a different ring tone for each phone so you know which one is ringing. To
MFB
answer the incoming call, press
as usual.
► All the button functions remain the same for the first phone (the one you paired first).
DoWn
► To use last number redial on the second phone, press and hold
for about ꢀ seconds.
(When you hear a beep, release the button.)
Up
► To activate voice dialing on the second phone, press and hold for about ꢀ seconds. (When
you hear a beep, release the button.)
10
Troubleshooting and Maintenance
If you have problems with the headset, see the suggestions in the table below. If these
suggestions don’t help, contact customer support (see the cover for contact information).
If...
Try...
The headset won’t turn on. • Charging the battery completely.
• Making sure your phone is in pairing mode. Check your phone’s manual for
The headset won’t pair with
my phone.
instructions on Bluetooth device pairing.
• Turning the headset off. Wait at least 10 seconds, then try again.
• Seeing if your phone supports the Bluetooth Headset or Hands Free profiles.
The headset paired with
• Making sure the call connected and is still active.
my phone, but I can’t hear • Making sure the phone transferred the call to the headset. Press and hold
MFB
for two seconds to transfer the call.
anything through it.
• Seeing if the battery is getting low. If the LED is blinking red, charge the
battery.
• Seeing if your phone has lost the network signal. If your phone sounds an
alert when it can’t connect to the network, the headset passes on this alert by
beeping every 5 seconds.
The headset keeps beeping,
and I don’t know why.
• Turning the speaker volume up.
I can hear the caller, but the
audio is very weak or soft.
• Moving closer to your phone (if you aren’t carrying it).
• Keeping the battery fully charged; As the battery starts to run out, the speaker
gets softer.
Noise or Static on the Headset
General Information
The most common cause of noise or static on any
wireless device is interference. Bluetooth devices
operate in the ISM band (ꢀ.ꢂ0ꢀ GHz ~ ꢀ.ꢂꢄ0 GHz);
any equipment operating in this frequency range
might interfere with the headset. Some common
sources of interference in this range are
• You cannot use the headset while it is recharging.
• Bluetooth wireless devices have a maximum range
of ꢁ0 feet (10 m); the actual range varies depending
on current conditions (obstacles, battery power,
interference, etc.).
• The headset can be connected only to devices
that support the Bluetooth headset or hands-free
profile. This product is not compatible with standard
cordless phones.
• Equipment that uses microwaves, especially
microwave ovens
• Wireless LAN equipment or WiFi connections
• Other Bluetooth devices or computers
Battery life
• Certain cordless telephones
• With average use, the battery should provide about
6 hours of talk time and ꢃ days of standby time. If a
battery is new or left unused for a long time, it can
have reduced capacity the first few times you use it.
For maximum battery life, keep the battery charged.
• When the battery only has enough charge for about
15 minutes of talk time, the headset triggers a low
battery alert: you’ll hear a periodic beep, and the
LED changes from blue to red.
• Certain medical equipment and appliances
If you have problems with static during calls, look for
one of these interference sources. Try moving away
from the suspected source.
If the noise continues, there may be interference
on your phone itself, and any noise in the phone’s
connection will come through on the headset, too.
Transfer the call to your phone and see if the audio
quality improves. If it doesn’t, look around for things
that can interfere with your phone.
• When the battery no longer has enough charge to
operate the headset, the headset will power off;
you won’t be able to turn it back on until you charge
the battery.
• Turn the volume down before powering off the
headset and readjust the volume each time you
turn it on.
Safety and Handling Information
For maximum product life, do not drop, throw, or
crush the headset. Do not expose it to humidity, dust,
or temperatures above 1ꢀ5 F.
• If someone next to you can hear the other end of the
call through your headset or if your ears hurt or ring
when you hang up, the volume is too high.
• The longer your ears are exposed to noise, the
greater the risk of damage. Limit calls at higher
volumes (or other exposure to loud noise).
• For more information on protecting your hearing,
gov/health/wise/) or consult an audiologist.
Cleaning the headset
• If necessary, remove the earhook. Dampen a lint-
free cloth with water or a cleaner specially designed
for electronics, and gently wipe the headset clean.
• Do not expose this product to liquid (water, alcohol,
etc.) or submerse in liquid for any reason.
Avoiding hearing damage
Important Safety Instructions
Using any headset or earbud at too high a volume can
cause permanent hearing damage. To reduce the risk
of hearing damage:
Uniden America Corporation DOES NOT represent
this product to be waterproof. To reduce the risk
of fire, electrical shock, or damage to the product,
DO NOT expose this product to rain or moisture.
When using the headset, always follow basic safety
precautions to reduce the risk of fire, electric shock
and injury to persons, including the following:
• Do not use this product near water, for example,
near a bath tub, wash bowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
• Set the volume at the minimum level needed to
hear in the current environment. If possible, use
your headset in quiet surroundings or try to move to
an area with less background noise before adjusting
the volume.
• Start with the volume at its lowest setting, then
gradually increase it until you can hear.
• Use only the power cord and batteries indicated
in this manual. Do not expose the battery (or the
device) to flames or dispose of it in a fire: the battery
may explode. Check with local authorities for
possible battery disposal instructions.
FCC Notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (ꢀ) This device must accept any interference
received, including interference that may cause
undesired operation. Privacy of communications may
not be ensured when using this product.
• Do not disassemble, modify, or attempt to repair any
component of this product.
• Check the laws and regulations on the use of
mobile phones and hands-free equipment in the
areas where you drive. Always give full attention to
driving and pull off the road and park before making
or answering a call if driving conditions require.
• Do not allow children to play with the headset:
since it contains small parts that could become
detached and create a choking hazard.
• Turn off your headset when pumping gas, handling
flammable materials, or in any area with a risk of
explosion. In rare occurrences, this product could
generate sparks which can cause an explosion or
fire. Follow all warning notices in your immediate
area!
To insure the safety of users, the FCC has established
criteria for the amount of radio frequency energy
various products may produce depending on their
intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For
body worn operation, the FCC RF exposure guidelines
were also met when used with the Uniden accessories
supplied or designed for this product. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines and should be avoided.
Industry Canada statement
This device complies with RSS-ꢀ10 of the Industry
Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful
interference, and (ꢀ) this device must accept any
SAVE THESE INSTRUCTIONS!
interference received, including interference that may
cause undesired operation.
Two-Year Limited Warranty
Evidence of original purchase is
required for warranty service.
IMPORTANT NOTE: Radiation Exposure Statement
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions
for satisfying RF exposure compliance. To maintain
compliance with IC RF exposure compliance
WARRANTOR: UNIDEN AMERICA CORPORATION
(“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for two
years, to the original retail owner, this Uniden Product
to be free from defects in materials and craftsmanship
with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original
user shall terminate and be of no further effect ꢀꢂ
months after the date of original retail sale. The
warranty is invalid if the Product is a) damaged
or not maintained as reasonable or necessary, b)
modified, altered, or used as part of any conversion
kits, subassemblies, or any configurations not sold
by Uniden, c) improperly installed, d) serviced or
repaired by someone other than an authorized
Uniden service center for a defect or malfunction
covered by this warranty, e) used in any conjunction
with equipment or parts or as part of any system
not manufactured by Uniden, or f) installed or
requirements, please follow operation instruction as
documented in this manual.
Lithium-polymer battery information
This device contains a lithium-polymer battery. The
headset and battery must be recycled or disposed of
properly. Contact your local waste management office
for information on battery recycling or disposal.
programmed by anyone other than as detailed by the consequential damages so the above limitation or
owner’s manual for this product. exclusion may not apply to you.
STATEMENT OF REMEDY: In the event that the product LEGAL REMEDIES: This warranty gives you specific
does not conform to this warranty at any time while
this warranty is in effect, warrantor will either, at its
legal rights, and you may also have other rights which
vary from state to state. This warranty is void outside
option, repair or replace the defective unit and return the United States of America and Canada.
it to you without charge for parts, service, or any
other cost (except shipping and handling) incurred
by warrantor or its representatives in connection
with the performance of this warranty. Warrantor,
at its option, may replace the unit with a new or
refurbished unit.
PROCEDURE FOR OBTAINING PERFORMANCE OF
WARRANTY: If, after following the instructions in the
owner’s manual you are certain that the Product is
defective, pack the Product carefully (preferably in
its original packaging). The Product should include
all parts and accessories originally packaged with
the Product. Include evidence of original purchase
and a note describing the defect that has caused you
to return it. The Product should be shipped freight
prepaid, by traceable means, to warrantor at:
Uniden America Service
THE LIMITED WARRANTY SET FORTH ABOVE IS THE
SOLE AND ENTIRE WARRANTY PERTAINING TO THE
PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not
allow this exclusion or limitation of incidental or
ꢂꢃ00 Amon Carter Blvd.
Fort Worth, TX ꢃ6155
|