Uniden Cordless Telephone DECT1060 2 User Manual

 
Contents  
Setting up  
Finding a location  
Connecting your phone  
Preparing the handsets  
Installing and charging the handset battery pack  
Battery Low Warning  
Battery Performance  
Setting the date and time  
Connecting the telephone line cord  
4
Store a redial number to the phonebook  
Deleting numbers from the redial list  
14  
15  
15  
15  
16  
4
4
5
5
6
6
6
6
Mute (privacy)  
Finding/paging handsets  
Keypad lock  
Conversation recording  
(DECT1080/DECT1080-2 only)  
16  
Using the phonebook  
17  
17  
18  
18  
19  
19  
19  
Store a phonebook name/number  
View and dial a phonebook entry  
Edit a phonebook name/number  
Delete a phonebook name/number  
Copy phonebook names/numbers  
Check available memory space  
Your handset  
Your base  
Your handset display  
Standby Display  
Quick Guide  
7
8
9
10  
11  
Using your phone  
Make a call  
Adjust the earpiece/speaker volume during a call  
Make a call by pre-dialing  
Handset range  
Call timer  
Handsfree  
End a call  
Receive a call  
12  
12  
12  
12  
12  
12  
12  
13  
13  
13  
13  
13  
14  
14  
14  
Handset and base menu settings  
Handset ringer volume  
Handset ringer type  
Auto talk  
Sound enhancer  
Appointment  
Alarm  
Handset name  
Talk display  
20  
20  
20  
21  
21  
21  
22  
22  
22  
23  
Call Waiting  
Receiving internal calls  
Muting the ringer  
Language  
Base ringer volume (DECT1080/DECT1080-2 only) 23  
Base ringer type (DECT1080/DECT1080-2 only)  
Prefix dialing  
Seven-Digit Dialing  
Call barring  
24  
24  
25  
25  
Redial  
Redial the last number called  
Redial any of the last 10 numbers called  
[2]  
 
Settings menu  
Tones  
Dial Mode  
Tone Dialing Switch-Over  
Registering a new handset  
De-register a handset or a base  
Base PIN code  
Selecting a base  
Resetting your phone  
26  
26  
26  
27  
27  
28  
29  
29  
30  
Record Memo  
Answering Machine Settings  
Answer on/off  
38  
38  
39  
39  
39  
39  
39  
40  
40  
40  
40  
40  
41  
42  
Play/Delete/Record OGM  
Select OGM  
Setting Call Screen  
Using Call Screen  
Ring Delay  
Message Length  
Setting Remote PIN  
Message Alert  
Default settings  
31  
Network services  
Caller ID  
Call Waiting Tone  
Calls log  
32  
32  
32  
32  
33  
33  
34  
34  
Language  
Using the Base Answering Machine  
Remote Access Away from Home  
Simple solutions  
Handset/Base  
Caller ID  
Telephone Answering Machine  
(DECT1080/DECT1080-2 only)  
43  
43  
44  
View the Calls log  
Copy Calls log number to the phonebook  
Delete Calls log entry(ies)  
Message waiting (DECT1060/DECT1060-2 only)  
44  
Using extra handsets  
Room monitor  
Using room monitor  
Call another handset (internal or intercom call)  
Answer an external call while on an internal call  
Transferring a call  
35  
35  
35  
36  
36  
36  
37  
General information  
Specifications  
Maintenance  
Cleaning your product  
Replacing the handset battery pack  
Liquid Damage  
Precautions  
I.C. Notice  
Warranty  
45  
45  
45  
45  
45  
46  
47  
50  
51  
Conference call  
The Telephone Answering Machine  
(DECT1080/DECT1080-2 only)  
Answering Machine Operation from a Handset  
Message Playback  
38  
38  
38  
[3]  
 
Connecting your phone  
Setting up  
1 Connect the base power supply to the back of  
the base. Plug the other end into the wall  
electrical outlet.  
Follow these simple steps to prepare your  
phone for use.  
Finding a location  
WARNING  
Use only the power supply that came with your  
phone.  
• The location should be close to both a phone  
jack and a continuous power outlet (one which  
is not connected to a switch).  
Using another power supply could seriously  
damage your phone and invalidate your  
warranty.  
• The base and handset should be kept away  
from sources of electrical noise such as motors,  
microwave ovens, and fluorescent lighting.  
Do not connect the telephone line cord until  
your handset is fully charged. This will prevent  
the risk of the phone being answered before the  
battery pack is charged. Answering the phone  
before the battery pack is fully charged may  
prevent them from reaching their optimum  
capacity.  
• For better reception, place the base as high as  
possible.  
• The base should be placed in an open area for  
optimum range and reception.  
• If your home has wired alarm equipment  
connected to a phone line, be sure that  
installing the system does not disable your  
alarm equipment. If you have questions about  
what will disable alarm equipment, contact your  
telephone company or a qualified installer.  
2 If you have purchased a model containing  
multiple handsets and chargers, connect each  
charger's power supply to the charger base and  
plug into a wall electrical outlet.  
[4]  
 
Preparing the handsets  
NOTE: Once your handset is fully charged, your  
phone is designed for the base charge  
LED to turn off for approximately 4  
Installing and charging the handset battery pack  
seconds during the following instances:  
1 On each handset:  
Remove the battery compartment cover.  
Press down on the semi-circle indent and slide  
the cover off.  
1) just after reaching a full charge  
2) 1 minute after reaching a full charge  
3) every 5 minutes after reaching a full charge  
Connect the supplied battery pack with the  
correct polarity.  
Slide the battery cover back until it clicks  
securely into place.  
To alleviate the charge LED from blinking on the  
base, you can simply remove the handset from  
the charging cradle.  
2 To charge the battery, place the handset(s) on  
the base or on a charger. The charging light in  
the base illuminates. While charging, the  
You may also select to leave the handset in the  
cradle, which will not damage the unit. Once fully  
charged, you may notice the charge LED light will  
turn for 4 seconds every 5 minutes. This is normal  
operation and does not mean your unit is  
defective.  
symbol  
scrolls and when the handset is fully  
charged, all the bars of the battery symbol will  
be filled when the phone is off the cradle.  
If the charging light does not come on, reposition  
the handset in the base or charger, ensuring that  
the charging points contact. You must charge  
each handset for 15-20 hours before use.  
WARNING  
Under no circumstances should non-  
rechargeable batteries be used. Only use the  
supplied battery pack or you will invalidate your  
guarantee and may damage the telephone.  
[5]  
 
BATTERY LOW WARNING  
Setting the date and time  
If the  
symbol is displayed on the handset,  
The phone uses the 24 hour clock.  
CHARGE BATTERYappears and you hear the  
low battery tone, you will need to recharge your  
handset.  
In standby:  
1 Press  
.
2 Press  
displayed and press  
or  
until Time & Alarmis  
For optimum performance, be sure to return the  
handset to the cradle after each call. If the  
handset is left off of the base, the actual talk  
time duration will be reduced respective to the  
amount of time the handset is off the cradle.  
.
3 Press  
displayed and press  
or  
until Set Date&Timeis  
.
Battery Performance  
4 Enter Day, Month, and Year using the keypad,  
e.g. 030605 for 3rd June 2005, and  
The handset may become warm during charging,  
this is normal. On a single charge your handset  
will give 16 hours talk time and 7 days standby  
time.  
press  
.
5 Enter Hour and Minute using the keypad, and  
press  
.
Over time, as the batteries wear out, the charge  
capacity will reduce, therefore, reducing the  
talk/standby time of the handset.  
6 Press  
to return to standby.  
Connecting the telephone line cord  
1 Connect the telephone line cord into the TEL  
LINE jack on the back of the base.  
Plug the other end into the telephone outlet.  
Setting up your phone is complete.  
Eventually the battery pack will need to be  
replaced.  
Now you can make and receive calls.  
[6]  
 
Your Handset  
Up/Redial  
Earpiece  
Display  
Clear  
• Press during a call to increase the  
earpiece or speaker phone volume.  
• Use to scroll through the phonebook,  
menu, redial list, or CALLER ID log.  
• Use to access the redial list.  
• Use to delete incorrect digits or letters.  
• Press to go back to the previous menu.  
• Press and hold to mute the  
Menu/OK  
• Press to access the menus.  
• Press to confirm a setting.  
• Use for handset call screening.  
ringer temporarily.  
Down/Phonebook  
• Press during a call to decrease the  
earpiece or speaker phone volume.  
• Use to scroll through the phonebook,  
menu, redial list, or CALLER ID log.  
• Use to access the phonebook list.  
End/Turn on/off  
• Press to end a call.  
• Press to exit the menu mode and return  
to standby.  
• Press and hold to turn handset on or off.  
Talk  
Intercom  
• Press to make and receive calls.  
Use when making internal calls,  
conference calls or for transferring calls  
(if you have more than one handset  
registered to your base).  
Speaker  
• Use for handsfree.  
• Press and hold to play messages.  
(DECT1080/DECT1080-2 only)  
Lock  
Press and hold to switch the  
handset keypad lock On and Off.  
CID/Flash  
• Use for flash and conference function.  
• Use to access the CALLER ID log.  
• Press and hold to insert a pause.  
Temporary Tone  
Press and hold to switch the  
dial mode to tone temporarily.  
Microphone  
Note: Each handset can be turned off to conserve battery life. To turn off the handset, press and hold  
When the handset is turned off, you cannot make or receive calls on that handset. To turn the handset  
on again, press and hold or place the handset in the charger.  
.
[7]  
 
Your base  
AC power (yellow)  
Answering Machine LED Display  
AC power (yellow)  
Telephone line  
Telephone line  
Charge LED  
• Lights up when handset is  
charging in the cradle.  
In Use LED  
• Lights up when handset is  
in use.  
Find HS  
• Press to page handset(s).  
play/stop  
• Press to play messages.  
• Press to stop playback.  
skip  
• Press to play next message.  
delete  
• Delete a message.  
Ans (answering machine)  
on/off  
• Press to turn answering  
machine On or Off.  
repeat/back  
volume  
• Press to replay • Adjusts answer machine  
messages. speaker volume.  
for DECT1080/DECT1080-2  
for DECT1060/DECT1060-2  
[8]  
 
Your handset display  
Symbol Explanation  
Symbol Explanation  
Displayed when you are in handsfree.  
Always displayed when your handset is  
on, shows the battery status.  
Battery fully charged.  
Half charged.  
Displayed when the ringer volume is set  
to OFF.  
Always displayed when your handset is  
on, shows the handset is linked to the  
base.  
Empty and you hear a warning tone -  
the battery is low and needs charging.  
Flashes and you hear a warning tone  
during a call if the handset moves out of  
range, you will need to move closer to  
the base for clearer reception.  
Remains steady when the line is in use.  
Flashes while connecting and  
receiving calls.  
Indicates the alarm has been set.  
The call is muted.  
Displayed when the keypad has been  
locked.  
Displayed when you have a new voice  
message. (DECT1060/1060-2 only)  
Flashes when new messages are  
recorded.  
Displayed when messages are played.  
(DECT1080/DECT1080-2 only)  
[9]  
 
Standby Display  
Once charged, your handset display will appear as illustrated below, displaying the handset name and  
number, and time and date. This is referred to as ‘standby mode’.  
For example:  
Battery Level Indicator  
Handset-Base Signal Indicator  
You can personalize your handset  
with your name (see page 22).  
Day/Month  
Time of Day  
Handset Number  
[10]  
 
Quick Guide  
Function  
Button press  
, enter number.  
Make a call  
Make a call by pre-dialing Enter number,  
Adjust earpiece volume During a call,  
.
or  
.
End a call  
Receive a call Phone rings,  
Redial then  
Privacy During a call,  
or place handset on base/charger.  
.
or  
to display number,  
.
and select Mute, repeat the same step to select “Unmute  
to resume a call.  
then  
Store phonebook number  
, select New Entry  
,
, enter name,  
,
enter number,  
.
Select Tone  
,
, then select Save  
,
.
Dial phonebook number  
Handset ringer melody  
then  
then  
or  
or  
,
.
to Audio Setting  
to Ringer Typethen  
to select External  
Alarm, or Appointment  
to select the melody,  
to select internal handset number,  
.
Press  
Press  
or  
or  
.
,
Internal  
,
Paging  
,
.
Press  
or  
.
Make internal call  
then  
or  
or  
.
[DECT1080/DECT1080-2 only]  
Answering machine ON/OFF  
Play/Stop your messages  
(on base).  
[11]  
 
Handset range  
Using your phone  
If the handset is too far away from the base,  
during standby, Searchingappears and the  
symbol will flash. During a call you will hear a  
warning tone. You will need to mover closer to the  
base for clearer reception and to avoid being  
disconnected.  
Make a call  
1 Press  
the  
symbol is displayed. When  
you hear the dial tone, dial the number you  
want. The number is shown in the display.  
After a short delay the call timer will start timing  
the call.  
Call timer  
When you make or receive a call, a short while  
after the line is connected the call timer will show  
the duration of the call in the display in hours,  
minutes and seconds. The call time will be  
displayed for a further 5 seconds after you end  
the call.  
2 Press  
to exit and return to standby.  
Adjust the earpiece/speaker volume during a  
call  
1 Press  
or  
to adjust the volume.  
There are six levels.  
Handsfree  
Make a call by pre-dialing  
You can use handsfree to talk to your caller  
without holding the handset to your ear. You can  
speak into the handset microphone and listen over  
the loudspeaker.  
1 In standby, enter the number to be dialed.  
The number is displayed.  
You can enter numbers up to 24 digits long.  
Handsfree also enables other people in the room  
to listen in to the conversation.  
Press  
to delete any incorrect digits.  
to delete all digits.  
Press and hold  
2 Press  
to dial the displayed number.  
 
[12]  
During a call:  
1 Press  
handsfree.  
Call Waiting  
. The  
symbol is displayed while  
again to go back to the  
If you subscribe to Call Waiting and the call  
waiting tone sounds during a call, press  
switch between callers.  
to  
2 Press  
or  
This model has a special call waiting tone in  
normal talk operation.  
addition to the one you typically hear from your  
local service provider. This tone will be heard after  
the standard tone when you receive a call waiting  
notification. This tone is provided as an extra  
feature and will have to be turned on in order to  
activate as the default setting is set to OFF. To  
turn this feature on, go to the menu, select audio  
setting, tones, and call waiting - then set the  
feature to ON.  
End a call  
1 Press  
.
Or  
Place the handset back on the base/charger.  
The call time will remain in the display for a  
further 5 seconds.  
Receive a call  
NOTE: If this feature is set to OFF, you WILL still  
receive call waiting notifications IF you  
have subscribed to call waiting features  
from your local service provider.  
When you receive a call, the handset(s) will  
ring (as long as handset ring volume is not set to  
OFF - see page 20).  
The symbol  
will flash in the handset display.  
If you have subscribed to a Caller ID service, the  
caller’s number will be displayed (if available).  
See page 32 for further information on Caller ID.  
Receiving internal calls  
If you receive a call from another handset, the  
internal caller’s handset number and banner  
name, if programmed, will be displayed.  
1 Press  
to answer the call.  
Muting the ringer  
Or simply lift the handset from the base (providing  
Auto Talk is set to On, see page 21). After a short  
delay the call timer will start timing the call.  
You can also turn the ringer off or mute  
temporarily, by pressing and holding  
the phone rings.  
while  
[13]  
 
Store a redial number to the phonebook  
Redial  
1 In standby, press  
number called.  
to display the last  
Redial the last number called  
1 Press  
2 Press  
3 Use  
.
2 Press  
or  
to display the redial  
.
number you want.  
or  
to select Redial  
.
3 Press  
, then use  
or  
to select  
Store to Phbk, press  
.
4 Press  
.
4
<Enter Name>is displayed.  
Enter a name using the keypad and press  
For information on entering names, see page 17.  
You can enter a name of up to 13 letters.  
Redial any of the last 10 numbers called  
Your handset saves the last 10 numbers called  
into a redial list. You can select and redial any  
number from the list at a later time. Each handset  
has its own redial list. Numbers stored in the  
redial list can be up to 24 digits long.  
.
Press  
to delete an incorrect letter.  
5 The number is displayed again, press  
6 Select distinctive ring if required. Press  
.
1 In standby, press  
last number called.  
to display the  
or  
to select a ringer. Select No Specialif a  
distinctive ring is not required then press  
.
2 Press  
or  
to display any of the  
last 10 numbers called.  
7 Select Saveand press  
. Or press  
or  
to select Go Backto go back to the  
If the name/number is stored in the phonebook,  
the name will be shown as well.  
previous menu and press  
beep to confirm the entry is stored.  
. You will hear a  
3 Press  
to dial the displayed number.  
8 Press  
to return to standby.  
[14]  
 
Deleting numbers from the redial list  
Press  
and then select Unmute.  
1 In standby, press  
number called.  
to display the last  
Finding/paging handsets  
You can use the Find Handset button on the base  
to locate a missing handset or page the user  
(paging calls cannot be answered by a handset).  
2 Press  
or  
to display any of the last 10  
numbers called.  
1 Press  
on the base.  
3 With the number you want displayed, press  
.
Any handsets registered to your base will ring.  
4 Press  
number selected or All Clearto delete all  
numbers in the list. Press  
or  
to select Clearto delete the  
To stop the paging ring:  
1 Press  
on the handset or press  
.
on the base again.  
If you do not stop the paging ring, it will stop  
automatically after 60 seconds.  
5 Press  
Press  
or  
.
to select Yesto confirm.  
6 Press  
to return to standby.  
Mute (privacy)  
When on a call you can mute the handset  
microphone and speak privately to someone in the  
same room, without your caller hearing you.  
1 During a call, press  
and select Mute  
.
Press  
.
The symbol  
is displayed while mute is on  
and your caller cannot hear you.  
2 Repeat the same step to resume your call.  
[15]  
 
Keypad lock  
Conversation recording  
The keypad lock helps prevent accidental dialing  
when you are carrying the handset around and  
can also be used to stop younger children dialing  
out accidentally.  
(DECT1080/DECT1080-2 only)  
When on a call, you can record a conversation.  
1 During a call, press  
.
When the keypad lock is on, you can still receive  
2 Press  
press  
or  
.
to select Rec Converse,  
calls by pressing  
or  
, but you cannot  
make calls except for emergency 911 calls.  
The recording will stop when the maximum  
recording time is reached.  
Switch the keypad lock ON  
1 Press and hold  
.
symbol appears.  
Switch the keypad lock OFF  
1 Press and hold  
return to standby.  
to unlock the keypad and  
[16]  
 
If you enter a letter and the next letter is on the  
same button, press to move the cursor to  
Using the phonebook  
the right before trying to enter the next letter.  
You can store your 100 frequently used names  
and numbers in the phonebook for easy dialing.  
To switch between upper and lower case,  
Press  
to exit the phonebook menu and  
press  
.
return to standby at any time.  
5
<Enter Number>is displayed. Enter the  
number. Press  
Store a phonebook name/number  
Phonebook entries are stored alphabetically.  
.
To enter a pause, press and hold  
You will see an appear in the display first.  
Continue holding until you see a for  
pause appear in the display.  
.
1 Press  
2 Press  
.
R
P
.
3 Press  
Press  
or  
.
to select New Entry.  
<Enter Name>appears.  
Stored numbers can be up to 24 digits long.  
Press  
Press  
to delete an incorrect digit.  
to confirm the number.  
4 Enter name using the keypad, then press  
Stored names can be up to 13 letters long.  
.
Press  
to delete an incorrect letter.  
6 Press  
press  
or  
.
to select a tone type and  
Entering names  
For example, to enter the name JOHN:  
For  
For  
For  
For  
J,  
O,  
H,  
N,  
press once.  
7 Press  
and press  
or  
to select Saveor Go Back  
.
press three times.  
press twice.  
8 The phonebook entry is now stored.  
Press to return to standby.  
press twice.  
[17]  
 
Entering a ‘pause’ in a stored number  
You may need to enter a pause in some  
international or charge card numbers or if you are  
connected to a switchboard.  
Edit a phonebook name/number  
Press to access the phonebook list.  
1
2 The display shows the first alphabetical entry in  
the phonebook.  
When storing a number, at the point where you  
Press  
or  
to display the name for  
want a pause, press and hold  
an appear in the display first. Continue holding  
until you see a for pause appear in the  
display.  
. You will see  
the entry you want (or search alphabetically).  
R
P
3 Press  
to access the phonebook menu.  
or until Edit Entryis  
4 Press  
View and dial a phonebook entry  
1 Press and the first alphabetical entry is  
displayed.  
displayed and press  
.
5 The name is displayed.  
2 Press  
or  
to scroll through the  
6 Press  
Press  
or  
to move the cursor.  
entries and display the entry you want.  
Or  
Search alphabetically for the entry.  
repeatedly to delete any incorrect  
letters, then enter the correct letters using the  
keypad and press  
.
To search alphabetically  
Enter the first letter of the name you want using  
the keypad.  
7 The number is displayed. Press  
move the cursor.  
or  
to  
Press  
digits and then enter the correct number using the  
keypad and press  
repeatedly to delete any incorrect  
e.g. for Helen, press  
twice, then use  
or  
to display the exact entry you want.  
.
3 Press  
Or  
to dial the number.  
8 Select a tone type and press  
.
Press  
to exit and return to standby.  
[18]  
 
Copy phonebook names/numbers  
1 Using the handset that you want to copy from,  
9 Select Saveor Go Backand press  
.
press  
to access the phonebook list.  
10 Press to exit and return to standby.  
2 Press  
or to display the name for  
the entry you want (or search alphabetically).  
Or skip this step if you want to copy the whole  
phonebook to another handset.  
Delete a phonebook name/number  
1 Press to access the phonebook list.  
2 The display shows the first alphabetical entry in  
the phonebook.  
3 Press  
4 Press  
.
Press  
to display the name for  
or  
or  
to select Copy Entryor  
the entry you want (or search alphabetically).  
Copy All. Press  
.
3 Press  
to access the phonebook menu.  
or until Delete Entryis  
5 Select a handset to copy to, press  
When the selected handset rings press  
.
4 Press  
displayed and press  
the  
key on the handset which is ringing,  
.
the display shows Transfer Done  
.
5 Press  
6 Press  
or  
to select Yes.  
Check available memory space  
to confirm deletion or press  
to  
1 Press  
.
go back to the menu screen without deleting.  
2 Press  
.
7 Press to exit and return to standby.  
3 Press  
Press  
or  
to select Information.  
.
The number of stored entries appears.  
[19]  
 
Handset ringer type  
Handset and base menu settings  
There are 10 handset ringer melodies to choose  
from, 6 Melodies and 4 Tones. You can select  
different ringtones for external calls, internal calls,  
page calls, alarm tones or appointment reminders.  
Handset ringer volume  
There are 6 ringer volumes to choose from.  
You can also select volume Offif you do not want  
to be disturbed.  
1 Press  
2 Press  
to access the main menu.  
You can set a different ringer volume for each  
handset registered to your base.  
or  
to select Audio Setting  
and press  
.
.
1 Press  
2 Press  
to access the main menu.  
3 Press  
and press  
or  
or  
to select Ringer Type  
or  
to select Audio Setting  
to select Ringer Volume  
to select the volume you  
and press  
.
.
4 Press  
Internal  
and press  
to select External  
,
3 Press  
and press  
or  
,
Paging Alarm, or Appointment  
,
.
4 Press  
or  
5 Press  
or  
to select the melody you  
want (you will hear a sample of each as you  
scroll through), then press to confirm.  
want. You will hear a sample of each as you  
scroll through the melodies.  
5 Press  
If you select Volume Off, the  
displayed.  
to exit and return to standby.  
6 With the ringer melody you want displayed,  
symbol will be  
press  
to confirm your selection.  
7 Press  
to exit and return to standby.  
[20]  
 
Auto Talk  
3 Press  
TREBLE  
or  
to select one from NORMAL  
,
Auto Talk, lets you answer the phone just by  
picking it up from the cradle. If you switch Auto  
,
ALTO, or BASS. Press  
to confirm.  
Talk off, you have to press  
even if a handset is on the base or charger.  
The default setting is ‘On’.  
to answer a call,  
Appointment  
The Date & Time must be set before you can  
access the Calendar menu option. To set Date &  
Time, see page 6. Your phone allows you to set 5  
personalized date and time appointments.  
1 Press  
to access the main menu.  
or to select Auto Talk  
2 Press  
Press  
.
1 Press  
to access the main menu.  
or to select Time & Alarm  
.
2 Press  
Press  
.
3 Press  
Press  
or  
.
to select Onor Off.  
.
3 Press  
Press  
or  
.
to select Set Appointm.  
4 Press  
to exit and return to standby.  
4 Press  
or  
to select one from  
Sound Enhancer  
Appointment 1to Appointment 5  
Press  
.
You can adjust the Audio Tone of the earpiece.  
Your phone gives you four audio tone options:  
Normal, Treble (High), Alto (Middle), or Bass (Low).  
.
5 Press  
or  
to select On. Press  
.
1 During a call, press  
menu.  
to access the main  
6 Enter date and time for the appointment  
(see page 6). Press  
.
2 Press  
SoundEnhancer. Press  
or  
to select  
7 Enter the appointment name using the keypad  
(up to 13 characters). Press  
.
.
[21]  
 
Alarm  
1 Press  
to access the main menu.  
Your phone allows you to set an alarm.  
1 Press  
to access the main menu.  
2 Press  
Press  
or  
.
to select Display.  
2 Press  
Press  
or to select Time & Alarm  
.
.
3 Press  
Press  
or  
.
to select Handset Name.  
3 Press  
Press  
or  
.
to select Set Alarm.  
4
Handset Nameappears. Enter the name using  
the number keypad. Press  
to confirm.  
4 Press  
or  
to select On. Press  
.
5 Press  
to exit and return to standby.  
5
Enter time for the alarm using the number keypad.  
Talk Display  
6 Press  
7 Press  
.
You can select the type of information displayed  
during a call the time of the call or the caller’s  
number (if available). The default setting is Time.  
to exit and return to standby. The  
appears, showing that the alarm is set to on.  
When the reminder occurs, your phone will ring.  
To stop alarm tone, press any key on the  
handset. Once set, the alarm remains on and  
will ring at the same time every day. To cancel  
the alarm, follow the instructions above and set  
the alarm to ‘Off’.  
1 Press  
to access the main menu.  
2 Press  
Press  
or  
.
to select Display.  
3 Press  
Press  
or  
.
to select Talk Display.  
Handset name  
4 Press  
Press  
or  
.
to select Timeor Number.  
You can change the name your phone displays on  
the screen. If you have more than one handset,  
you can use the name to identify your handset.  
5 Press  
to exit and return to standby.  
[22]  
 
Language  
Base ringer volume  
You can change the language the menu display  
will use. Choose from English, Spanish, or  
French.  
(DECT1080/DECT1080-2 only)  
There are 6 volume levels to choose from or you  
can select volume OFF.  
1 Press  
to access the main menu.  
1 Press  
2 Press  
to access the main menu.  
2 Press  
Press  
or  
.
to select Display.  
or  
to select Base Settings  
to select Audio Settings  
until Ringer Volumeis  
and press  
.
.
3 Press  
Press  
or  
.
to select Sel Language.  
3 Press  
and press  
or  
or  
4 Press  
or Français  
Press  
or  
to select English  
,
Español  
,
4 Press  
displayed and press  
.
.
to confirm.  
5 Press  
want (you will hear a sample of each as you  
scroll through), then press to confirm.  
or  
to select the volume you  
5 Press  
to exit and return to standby.  
6 Press  
to exit and return to standby.  
[23]  
 
Base ringer type (DECT1080/DECT1080-2 only)  
There are 10 base ringer options to choose from  
(6 Melodies and 4 Tones).  
Prefix dialing  
If you need to add a prefix to the number for a  
long distance call, or if you need to add your  
saved area code to the number, do the following:  
1 Press  
2 Press  
to access the main menu.  
1 Press  
to access the main menu.  
or to select Base Settings.  
or  
to select Base Settings  
to select Audio Settings  
until Ringer Typeis  
and press  
.
.
2 Press  
Press  
.
3 Press  
and press  
or  
or  
3 Press  
Press  
or  
.
to select Additional  
.
4 Press  
displayed and press  
.
4 Press  
Press  
or  
.
to select Prefix Dial  
.
5 Press or to select the ringer you want.  
You will hear a sample of each as you scroll  
through the ringer types.  
5 Enter the number using the number keypad or  
. Press  
to confirm.  
6 With the ringer type you want displayed, press  
to confirm your selection.  
6 Press  
to exit and return to standby.  
7 Press  
to exit and return to standby.  
[24]  
 
Seven-Digit Dialing  
Call barring  
You can program your local area code into your  
handset. If you get a call from within your area  
code, you'll only see the 7-digit phone number. If  
you get a call from outside your area code, you'll  
see all 10 digits.  
When switched on, Call Barring prevents calls  
from being made to a specific number, area code  
or international code.  
1 Press  
to access the main menu.  
or to select Base Settings.  
1 To enter an area code, press  
the main menu.  
to access  
2 Press  
Press  
.
2 Press  
displayed and press  
or  
until Base Settingsis  
3 Press  
Press  
or  
.
to select Call Barring.  
.
3 Press  
press  
or  
.
to display Additionaland  
4 Enter the number using the number keypad  
or  
. Press  
.
4 Press  
press  
or  
.
to select Area Codeand  
5 Press  
Press  
or  
to select Onor Off.  
to confirm.  
5 Enter the number of your area code using the  
number keypad and press  
6 Press  
to exit and return to standby.  
.
6 Press  
to exit and return to standby.  
[25]  
 
Settings menu  
5 Press  
Offand press  
select from pattern 1-3 or off and press  
or  
to display either Onor  
to confirm. For Keytone,  
Tones  
.
You can switch on or off the tones for key touch,  
confirmation, call waiting, and out-of-range alarm.  
For example, when the key tone is set to ON, you  
will hear a tone each time you press a keypad  
button.  
6 Press to exit and return to standby.  
Dial mode  
You can set your phone to use either Tone or  
1 Press  
2 Press  
to access the main menu.  
or until Audio Settingis  
Pulse dialing. The pre-set setting is TONE dialing,  
where you will hear a tone beep each time you  
dial a number. Most modern exchanges and  
switchboards use Tone dialing, so you should not  
need to change this setting. Only change it if your  
switchboard uses Pulse dialing or if you cannot  
make a call using Tone dialing.  
displayed and press  
.
3
Press  
until Tonesis displayed. Press  
.
4 Press  
or  
to select the option you want  
1 Press  
2 Press  
to access the main menu.  
or until Base Settingsis  
Key  
Confirmation  
Warning  
displayed and press  
.
3 Press  
press  
or  
.
to select Additionaland  
Call Waiting  
Range Alarm.  
4 Press  
press  
or  
to display Dial Modeand  
. The current setting is displayed.  
Press  
.
[26]  
 
Registering a new handset  
When you register a new handset to your base,  
you will be asked to enter the base PIN code.  
5 Press  
Pulseand press  
or  
to display either Toneor  
to confirm.  
6 Press  
to exit and return to standby.  
The pre-set PIN code is 0000. If you wish you can  
change this code, see page 29.  
Tone Dialing Switch-Over  
Before registering, make sure the new handset is  
fully charged and that you have the base and  
handset in front of you. Also, make sure all  
handsets and the base are in standby.  
If you have set your phone to use Pulse dialing,  
you can switch temporarily to Tone dialing for the  
duration of a call:  
1
Press  
.
On the handset you want to register:  
1 Press  
to access the main menu.  
2 Enter the number you want. Press and  
hold will be displayed.  
,
D
2 Press  
displayed and press  
or until Add.settingsis  
Any digits entered after the  
using tone dialing.  
D
will be dialed  
.
3 Press  
press  
or  
.
to display Registerand  
4 Press  
number and press  
or  
to select your base  
.
On your base:  
5 Press and hold  
for approx. 3 seconds.  
You are now in ‘registration mode’.  
[27]  
 
If the base already has the maximum number of  
handsets (6) registered to it you will need to de-  
register one of the existing handsets before you  
can register the new handset.  
De-register a handset or a base  
If you have more than one handset registered to  
your base or more than one base registered to your  
handset(s), you can de-register both the handset  
from the base or the base from the handset.  
See section for de-registering handsets.  
Before registering, make sure all handsets and the  
base are in standby.  
On the handset you want to register:  
Enter the base PIN code.  
Pre-set base PIN code is 0000.  
You will hear a confirmation tone when  
registration is complete.  
1 Press  
2 Press  
to access the main menu.  
or until Add. Settingsis  
displayed and press  
.
When in standby, the new handset number will be  
displayed.  
3 Press  
or  
to display Deregister  
and press  
.
The handset will automatically be allocated with  
the next available handset number.  
4 Press  
or  
to select Handsetor  
Baseand press  
5 Press or  
.
If registration is unsuccessful, the display will  
show Not Registeredand you will need to  
follow the registration procedure again.  
to display the handset or  
base you want to de-register and press  
.
6
Press or to select Yesand press  
.
If the handset registers to the base successfully,  
you will hear a confirmation tone.  
7 Press  
to exit and return to standby.  
[28]  
 
Base PIN code  
Selecting a base  
You need to enter the base PIN code when you  
are registering handsets. For security reasons you  
may wish to change the PIN code. You can  
choose a PIN code up to 4 digits long.  
You can register a handset to up to 4 bases, e.g.  
one at work and one at home or one upstairs and  
one in the garage, and switch between them.  
Once your handset is registered with other bases,  
you can either specify the base you want to use  
or, select Automaticfor your handset to choose  
the base with the strongest signal.  
If you reset the base from the handset, base PIN  
code will be 0000.  
Always keep a record of your base PIN code.  
Note your PIN code and keep it in a safe place.  
If you change the PIN code you will need to use  
the new code for any handset registered to your  
base.  
1 Press  
to access the main menu.  
or to select Add.Settings  
2 Press  
Press  
.
.
1 Press  
2 Press  
to access the main menu.  
or until Base Settingsis  
3 Press  
Press  
or  
.
to select Select Base.  
displayed and press  
.
4 Press  
or  
to select Automaticor  
the base number. Press  
.
3 Press  
press  
or  
.
to display Base Pinand  
4 Enter a new PIN code (up to 4 digits) and  
press  
.
5 Press  
to exit and return to standby.  
[29]  
 
Resetting your phone  
For the handset:  
If you reset your phone, both the base and  
handset will return to their default settings.  
The time, date, handset name, and phonebook  
will not return to default.  
1 Press  
to access the main menu.  
2 Press  
Press  
or  
.
to select Add.Settings.  
If you have more than one handset registered to  
your base and you complete the following  
procedure, only the handset you reset and the  
base will go back to the default settings.  
3 Press  
Press  
or  
.
to select Reset Handset.  
4 Press  
Press  
The handset will beep.  
or  
to select Yes.  
to confirm.  
For the base:  
1 Press  
to access the main menu.  
2 Press  
or until Base Settingsis  
displayed and press  
.
3 Press  
and press  
or  
or  
to display Reset Base  
.
4 Press  
confirm.  
to select Yesand  
to  
5 Press  
to exit and return to standby.  
[30]  
 
Base PIN  
0000  
Default settings  
Prefix Dial  
Call Barring  
Area Code  
Dial Mode  
Not Set  
Not Set  
Not Set  
Tone  
Handset and base  
Ringer Volume  
Ringer Type  
Level 3  
External  
Tone 1  
Tone 2  
Tone 3  
Tone 3  
Tone 3  
Pattern 1  
On  
Internal  
Paging  
[DECT1080/DECT1080-2 only]  
Select OGM  
Alarm  
Pre- Recorded  
On  
Appointment  
Key  
Answer On/Off  
Call Screen  
Tone  
On  
Confirmation  
Warning  
Ring Delay  
Toll Saver  
1min  
On  
Message Length  
Remote PIN  
Call Waiting  
Range Alarm  
Off  
0000  
On  
Language  
English  
On  
Alarm  
Not Set  
Message Alert  
Appointment  
Auto Talk  
Language  
Not Set  
On  
English  
[31]  
 
NOTE: If this feature is set to OFF, you WILL still  
receive call waiting notifications IF you  
have subscribed to call waiting features  
from your local service provider.  
Network services  
TO USE CALLER ID OR ANY OTHER SERVICES  
DETAILED IN THIS SECTION, YOU MUST FIRST  
CONTACT YOUR LOCAL TELEPHONE  
COMPANY AND SUBSCRIBE TO THE  
RELEVANT SERVICE.  
Calls log  
The calls log stores details of the last 30 incoming  
calls.  
Caller ID  
It can store numbers up to 24 digits long and  
names up to 13 characters long. When you have  
new calls the number of message appears in the  
display.  
With CALLER ID, the caller’s name, if available, is  
shown in the handset display as you receive an  
incoming call so you can see who is calling before  
you pick up the phone.  
If the caller has withheld their listing,  
Only the first 14 letters of the caller’s name are  
displayed.  
Unavailableor Privatewill be displayed or,  
if the number is unavailable the display will show  
Unavailable. You will not be able to dial back an  
entry with one of these messages.  
Call Waiting Tone  
This model has a special call waiting tone in  
addition to the one you typically hear from your  
local service provider. This tone will be heard after  
the standard tone when you receive a call waiting  
notification. This tone is provided as an extra  
feature and will have to be turned on in order to  
activate as the default setting is set to OFF. To  
turn this feature on, go to the menu, select audio  
setting, tones, and call waiting - then set the  
feature to ON.  
When the calls log is full, a new call will replace  
the oldest call.  
[32]  
 
View the calls log  
1 Press  
The latest calls log entry is displayed (or Call  
Copy Calls log number to the phonebook  
.
1 Press  
displayed.  
The latest calls log entry is  
.
or  
.
List Emptyif there are no entries).  
2 Press  
you want.  
to scroll to the number  
2 Press  
or  
to scroll through the calls log.  
to continue viewing other  
3 Press  
or  
3 Press  
calls log entries.  
Or  
Press  
4
Store to Phbkis displayed. Press  
Enter a name using the keypad and press  
to confirm.  
If you enter a name that is already stored in the  
phonebook, you will be prompted to enter  
another name.  
.
to exit and return to standby.  
Dial calls log number  
1 Press . The latest calls log entry is  
displayed.  
2 Press  
you want.  
or  
to scroll and display the entry  
5 The number is displayed. To confirm and save  
the entry to the phonebook, press  
.
If necessary, you can edit the number,  
3 To add (or delete) a "1" at the beginning of the  
displayed phone number, press  
To add (or remove) the stored area code,  
using  
to delete any incorrect digits and  
.
enter new ones using the keypad.  
press  
.
6 Press  
Press  
or  
.
to select a distinctive ring.  
4 Press  
to dial the entry displayed.  
7 Press  
or  
to Save. Press  
.
The entry is now saved in the phonebook.  
8 Press to exit and return to standby.  
 
[33]  
Delete Calls log entry(ies)  
1 Press  
The latest calls log entry is displayed.  
.
2 Press  
or  
to scroll to the entry you  
want. If you delete all calls log, skip this step.  
3 Press  
.
Select Delete Entryor Delete List  
.
Press  
to select Yesor Nothen press  
to confirm.  
4 Press  
to exit and return to standby.  
Message Waiting (DECT1060/DECT1060-2 only)  
If you have subscribed to a message waiting  
service through your local telephone company,  
when you have a message waiting in your  
mailbox, the  
handset.  
symbol will be displayed on the  
To listen to your waiting messages, you should  
call your voice mailbox as instructed by your local  
telephone services provider. When you have  
listened to your messages, the symbol  
longer be displayed.  
will no  
[34]  
 
Room Monitor  
Using extra handsets  
This feature allows you to monitor sounds in  
another room. For instance, you can use this  
feature and 2 handsets as a baby monitor.  
If you purchased a multi-pack all your handsets  
come pre-registered to the base.  
First, you will need to setup 2 handsets for room  
monitoring.  
You can use a total of 6 handsets with your base.  
Your handset can only be used with one base at  
any time during a call.  
Using Room Monitor  
1 Press  
on the handset.  
To register a handset to your base, see page 27.  
2 Press  
Press  
or to select Room Monitor  
.
.
To de-register a handset from your base, see  
page 28.  
3 Press  
to monitor.  
Press  
or  
to select the original handset  
If you already have 6 handsets registered to your  
base and you want to register a new handset, you  
will first need to de-register one of your existing  
handsets, see ‘De-register a handset or a base’,  
page 28.  
. The handset to monitor will ring.  
4 On the monitored handset, press  
Room monitor will start.  
.
With more than one handset you can make  
internal or intercom calls, transfer calls and hold  
conference calls.  
Place the handset you selected to monitor in the  
room you wish to monitor, it will function as a  
microphone.  
The second handset will be used as a remote  
speaker, allowing you to monitor sounds in the  
room.  
[35]  
 
Transferring a call  
You can transfer an external caller from your  
handset to another handset.  
To exit room monitor, press  
.
This feature only works when both handsets are  
within the range of the base. If either handset is  
out of range, the function will stop.  
During an external call:  
1 Press  
. The external caller is put ‘on-hold’.  
Call another handset (internal or intercom call)  
2 Press  
or to select name, number or  
1 Press  
. The  
symbol is displayed and  
the handset you want to transfer the call to and  
press  
ring.  
you will hear the internal call dialing tone.  
or  
key. The called handset will  
2 Press  
or the handset you want to call. Press  
or . The handset will ring.  
or  
to select the name, number,  
NOTE: If you do not select another handset to  
transfer the call to within 60 seconds,  
your caller will automatically be taken  
off of hold allowing you to continue your  
conversation.  
3 When the called handset answers, press  
or place the handset back on the base to end  
the call.  
3 When the called handset answers, press  
to transfer the call.  
If the called handset does not answer,  
press  
to return to the external caller.  
[36]  
 
Conference call  
You can hold a 3-way conversation (conference  
call) between your handset, an external caller and  
another internal handset user.  
During an external call:  
1 Press  
. The external caller is put ‘on-hold’.  
2 Press  
or to select name, number or  
the handset you want to have a conference call  
with and press or key.  
The called handset will ring.  
3 When the called handset answers, press  
to start your conference call.  
4 Any handset can press  
leave the conference call.  
at any time to  
[37]  
 
Handset Key  
Press and hold 1  
Function  
Play  
Repeat/Back  
Skip  
The Telephone Answering Machine  
(DECT1080/DECT1080-2 only)  
2
3
4
The Telephone Answering Machine will offer up to  
14 minutes of digital recording for incoming or  
outgoing messages and memo messages.  
Delete  
Delete All Messages  
The delete all messages feature can be accessed  
You can set up your answering machine using any  
handset and record a personal OGM (Out Going  
Message). Messages can be reviewed at the  
base, from any handset or from a touch tone  
phone on an outside line.  
from the AM Operationmenu. Use  
or  
. Press  
.
to  
select Delete Alland press  
or  
to select Yesand press  
Record Memo  
The record memo feature can be accessed from  
Answering Machine Operation from a Handset  
The answering machine settings can only be  
accessed from the handset menu.  
the AM Operationmenu. Use  
or  
to  
select Record Memo. Press  
.
1 In standby, press  
on the handset.  
After the confirmation tone, you can record a  
memo message 1 minute long. Your answering  
machine allows you the settings of recording times  
of 1 minute and 4 minutes (see page 40). The  
memo message is treated as a new message.  
2 Use  
or  
to select AM Operation.  
3 Press  
. You can now select from the AM  
Operationmenu or access messages with the  
following instructions.  
Answering Machine settings  
Answering Machine settings can be accessed  
Message Playback  
The answer machine messages can be played  
back using the number keys as shown below;  
from the AM Operationmenu. Use  
select AM Setting. Press  
or  
to  
.
[38]  
 
You can now choose from the AM settings menu  
as follows.  
Setting Call Screen  
Incoming messages can be screened (played  
through the base speaker) by setting this feature  
on.  
Answer On/Off  
To set the Answering Machine On or Off, use  
or  
Select the desired On or Off option and  
press  
to select Answer On/Off. Press  
.
Use  
Press  
or  
to select Call Screen.  
.
.
Select the desired On or Off option and  
press  
Play/Delete/Record OGM  
You may record and edit 2 personal OGMs  
(Out Going Messages). OGM 1 and OGM 2.  
.
Using Call Screen  
With Call Screen On, during OGM play and  
incoming message record the handset will show  
There is also a pre-recorded OGM for your  
selection.  
CallScreen=OK  
.
To play/delete or record an OGM, use  
to select Play OGM Delete OGMor Record OGM  
Press  
or  
If is pressed the call is screened through the  
handset speakerphone.  
,
.
.
The call can be answered at any time by pressing  
Select the desired option and press  
If recording an OGM, record will begin after the  
confirmation tone.  
.
or  
on the handset.  
This function is only available with one handset at  
a time.  
Select OGM  
To select an OGM, use  
or  
to select  
Select OGM. Press  
.
[39]  
 
Ring Delay  
Setting Remote PIN  
You can set the answering machine to pick up a  
call after 10sec, 20sec, 30sec or Toll Saver.  
You must set a 4 digit PIN to enable remote  
access from an outside line.  
For Toll Saver, the call is answered after 10sec if  
there are new messages and 30sec if there are no  
new messages.  
To set the Remote PIN use  
Remote PIN. Press . Enter a 4 digit PIN and  
press  
or  
to select  
.
Message Alert  
To set the base to beep when there is a new  
message use or to select Msg. Alert  
To set the ring time, use  
Ring Delay. Press  
delay option and press  
or  
to select  
. Select the desired ring  
.
.
Press  
and press  
. Select the desired On or Off option  
.
Message Length  
You can set the record length for incoming  
messages from 1 minute or 4 minutes or set to  
Announce only.  
Language  
To select the answering machine language, use  
or to select Language  
.
Announce only means only the OGM is played.  
Press  
Press  
. Select Englishor Español  
.
.
To set the message length use  
select Msg. Length  
or  
to  
.
Press  
. Select the desired message length  
option and press  
.
[40]  
 
Using the Base Answering Machine  
(Answering Machine On/Off)  
- Press to switch answer setting On or Off.  
(Delete)  
When the answering machine is off, the LED  
display at the base will be blank. The LED display  
is a message counter when the answering  
machine is on. When there are new messages,  
the number of new messages will be displayed  
and will be blinking. You may review messages  
from the base using the following keys.  
- Press during message playback to delete  
current message. In standby, a short press  
prompts a confirmation tone and another press  
will delete all old messages.  
(Play/Stop)  
- Press to play messages/stop messages. If there  
are new messages the answering machine will  
play new messages. If there are no new  
messages, the answering machine will play  
back old messages.  
(Repeat/back)  
- Repeat the playing message/back to the  
previous message.  
(Skip)  
- Skip to the next message.  
[41]  
 
Remote Access Away from Home  
06  
07  
Record OGM  
AM on/off  
You can access your answering machine from any  
remote touch tone phone on an outside line.  
You must set a 4 digit remote PIN in the handset to  
enable remote access (see page 41).  
1
2
9
OGM 1  
OGM 2  
To Main Menu  
1
2
9
On  
Off  
To use Remote Access;  
Call in to your answering machine. During the  
OGM playback, press the  
touch tone phone. The OGM will stop. Enter the 4  
digit PIN and you will have access to the  
answering machine. The voice guidance will play  
the help menu.  
To Main Menu  
key on your  
08 Message Length  
1
2
3
9
-
1 min  
4 min  
Announce only  
To Main Menu  
-
09  
Stop  
You may select from the key options below.  
You can still use remote access when the  
answering machine is Off. The answering machine  
will answer a call after 60 seconds.  
Key  
Main Menu  
Key  
Sub Menu  
00 Voice guidance  
01 Play Messages  
-
-
-
-
02  
03  
Repeat  
Skip  
-
-
-
-
04 Delete Message  
05 Select OGM  
-
-
9
9
1
2
3
9
OGM 1  
OGM 2  
Pre-Recorded  
To Main Menu  
[42]  
 
Handset/Base  
Simple solutions  
No dial tone  
• Is the handset registered to the base?−  
see page 27.  
The most common problems often have the  
simplest solutions. We hope that you will not  
experience any problems with your product, but in  
the event that you do, this section hopes to help  
you overcome any problems quickly and with  
minimum effort.  
• Is the  
symbol flashing and can you hear a  
beep during a call?if so, move closer to the  
base as you are out of range.  
First, check that:  
• the telephone line cord is correctly connected.  
Cannot dial out  
• Is  
symbol displayed?if so the keypad lock  
is on, see page 16.  
• the power cord is correctly connected  
and switched on.  
Handset does not ring  
• The ringer volume may be set to off,  
see page 20.  
• the battery pack is charged and not in need of  
replacing.  
• Is the  
symbol flashing?if so, move closer  
to the base as you are out of range.  
If you have more than one handset registered  
to your base, remember to check the  
connections on this too.  
If you are still experiencing problems, please try  
the following or feel free to contact our  
customer service center. See back cover page  
for contact information.  
[43]  
 
Handset is not charging properly  
• Check that the charge light is on and that the  
handset is sitting correctly in the base or  
charger. Clean the charging contacts with a dry  
cloth.  
CALLER ID  
Caller’s details are not displayed  
• Have you subscribed to a CALLER ID service?  
If not, contact your local telephone service  
provider.  
• Are you using the power adaptor supplied with  
your phone?  
• The caller may have withheld their details.  
Handset will not link up with the base  
• Let the phone ring a couple of times as  
there may be a delay in receiving the  
CALLER ID information.  
• Is the  
symbol flashing?if so, move closer  
to the base as you are out of range.  
TELEPHONE ANSWERING MACHINE  
(DECT1080/DECT1080-2 only)  
Not answering calls  
• Is the handset registered to the base?see  
page 27.  
• Check that answering machine is turned on,  
see page 39.  
• Buzzing noise on my radio, TV, computer  
or hearing aid. Sometimes your phone may  
interfere with other electrical equipment if it  
is placed too close. We recommend you  
leave a distance of at least one foot to  
avoid this.  
Cannot make a call  
• Is the Call Barring set?see page 25.  
• Is the prefix dial set?see page 24.  
[44]  
 
Maintenance  
Cleaning your product:  
General information  
Wipe the handset, base and charger with a damp  
(not wet) cloth, or an anti-static wipe. Never use a  
dry cloth as this may cause a static shock. Never  
use household polish as this will damage the  
product.  
This equipment is not designed for making  
emergency telephone calls when the power fails.  
Alternative arrangements should be made for  
access to emergency services.  
Specifications  
Replacing the handset batteries:  
Operating  
32° F to 122° F  
(0° C to 50° C)  
Base: AD-1012  
Charging Cradle: AD-0005  
Base: 120V AC, 60 Hz  
Charging Cradle: 120V AC, 60 Hz  
Base: 6V DC @ 400mA  
Charging Cradle: 9V DC @ 210mA  
BT-1002  
Over time, as the handset batteries wear out, the  
talk and standby times after charging will reduce.  
The batteries will eventually need replacing.  
Temperature  
AC Adapter  
Part Number  
Input Voltage  
Inserting new batteries:  
1 Remove the battery compartment cover and the  
old batteries.  
Output  
Voltage  
Battery Part  
Number  
Capacity  
2 Insert the rechargeable batteries. Connect the  
batteries with the correct polarity. Replace  
the battery compartment cover.  
2.4V DC @ 800mAh  
Notes:  
• Use only the supplied AD-1012 and AD-0005  
AC adapters.  
• Do not use any other AC adapter.  
• Do not place the power cord where it creates a  
trip hazard or where it could become chafed  
and create a fire or electrical hazard.  
• Do not place the base in direct sunlight or  
subject it to high temperatures.  
[45]  
 
IMPORTANT: You must unplug the telephone line  
while recharging the battery packs to avoid charge  
interruption.  
Liquid Damage  
Moisture and liquid can damage your cordless  
phone. Follow the suggestions below if your  
phone gets wet.  
Base:  
1. Disconnect the AC adapter from the base,  
shutting off electrical power.  
2. Disconnect the telephone cord from the base.  
3. Let dry for at least 3 days.  
Exterior  
If the handset or base is exposed to moisture or  
liquid, but only the exterior plastic housing is  
affected, wipe off the liquid, and use as normal.  
CAUTION: DO NOT use a microwave oven to  
speed up the drying process. This will cause  
permanent damage to the handset, base and the  
microwave oven. After following these steps, if  
your cordless telephone does not work, please  
call our Customer Service Hotline. See back cover  
page for contact information.  
Interior  
If moisture or liquid has entered the plastic  
housing (i.e. liquid can be heard in the phone or  
liquid has entered the handset battery  
compartment or vent openings on the base):  
Handset:  
1. Remove the battery cover and leave it off for  
ventilation.  
2. Disconnect the battery pack. Leave the  
battery cover off and the battery pack  
disconnected for at least 3 days.  
3. Once the handset is completely dry,  
reconnect the battery pack and the battery  
cover.  
4. Recharge the handset's battery pack for 15 to  
20 hours before using.  
[46]  
 
Warning!  
Precautions!  
The cords on this product and/or accessories contain  
lead, a chemical known to the State of California to cause  
birth defects or other reproductive harm. Wash hands  
after handling.  
Before you read anything else, please observe  
the following:  
Warning!  
Uniden America Corporation DOES NOT represent this  
unit to be waterproof. To reduce the risk of fire, electrical  
shock, or damage to the unit, DO NOT expose this unit to  
rain or moisture.  
Important Safety Instructions  
When using your telephone equipment, basic safety  
precautions should always be followed to reduce the risk  
of fire, electric shock and injury to persons, including the  
following:  
Rechargeable Nickel-Metal-Hydride Battery Warning  
This equipment contains a rechargeable Nickel-Metal-  
Hydride battery.  
The rechargeable batteries contained in this  
equipment may explode if disposed of in a fire.  
Nickel is a chemical known to State of California to  
cause cancer.  
1. Do not use this product near water, for example, near  
a bath tub, wash bowl, kitchen sink or laundry tub, in a  
wet basement or near a swimming pool.  
2. Avoid using a telephone (other than a cordless type)  
during an electrical storm. There may be a remote risk  
of electric shock from lightning.  
3. Do not use the telephone to report a gas leak in the  
vicinity of the leak.  
4. Use only the power cord and batteries indicated in this  
manual. Do not dispose of batteries in a fire. They may  
explode. Check with local authorities for possible  
battery disposal instructions.  
Do not short-circuit the battery.  
Do not charge the rechargeable battery used in this  
equipment in any charger other than the one specified  
in the owner's manual. Using another charger may  
damage the battery or cause the battery to explode.  
Rechargeable Batteries Must Be Recycled or  
Disposed of Properly  
5. Do not disassemble any component of this product.  
SAVE THESE INSTRUCTIONS  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect  
type. Dispose of used batteries according to the  
instructions.  
Do not open or mutilate the battery, and disconnect the  
battery before shipping this product.  
Uniden works to reduce lead content in our PVC coated  
cords in our product and accessories.  
[47]  
 
The FCC Wants You To Know  
REN is separately shown on the label.  
This equipment complies with Part 68 of the FCC rules  
and the requirements adopted by the ACTA. On the  
bottom of this equipment is a label that contains, among  
other information, a product identifier in the format  
US:AAAEQ##TXXXX. If requested, this number must be  
provided to the telephone company.  
If this equipment causes harm to the telephone network,  
the telephone company will notify you in advance that  
temporary discontinuance of service may be required. But  
if advance notice isn't practical, the telephone company  
will notify the customer as soon as possible. Also, you will  
be advised of your right to file a complaint with the FCC if  
you believe it is necessary.  
An applicable Universal Service Order Codes (USOC)  
certification for the jacks used in this equipment is  
provided (i.e., RJ11 C) in the packaging with each piece  
of approved terminal equipment. A plug and jack used to  
connect this equipment to the premises wiring and  
telephone network must comply with the applicable FCC  
Part 68 rules and requirements adopted by the ACTA. A  
compliant telephone cord and modular plug is provided  
with this product. It is designed to be connected to a  
compatible modular jack that is also compliant. See  
installation instructions for details.  
The telephone company may make changes in its  
facilities, equipment, operations or procedures that could  
affect the operation of the equipment. If this happens the  
telephone company will provide advance notice in order  
for you to make necessary modifications to maintain  
uninterrupted service.  
Please follow instructions for repairing, if any (e.g. battery  
replacement section); otherwise do not substitute or  
repair any parts of the device except as specified in this  
manual. Connection to party line service is subject to  
state tariffs. Contact the state public utility commission,  
public service commission or corporation commission for  
information. This equipment is hearing aid compatible.  
The REN is used to determine the number of devices that  
may be connected to a telephone line. Excessive RENs  
on a telephone line may result in the devices not ringing  
in response to an incoming call. In most but not all areas,  
the sum of RENs should not exceed five (5.0). To be  
certain of the number of devices that may be connected  
to a line, as determined by the total RENs, contact the  
telephone provider. For products approved after July 23,  
2001, the REN for this product is part of the product  
identifier that has the format US:AAAEQ##TXXXX. The  
digits represented by ## are the REN without a decimal  
point (e.g., 03 is a REN of 0.3). For earlier products, the  
Should you experience trouble with this equipment,  
please contact Uniden customer service at 800-297-  
1023. If the equipment is causing harm to the telephone  
network, the telephone company may request that you  
disconnect the equipment until the problem is resolved.  
[48]  
 
NOTICE: According to telephone company reports, AC  
electrical surges, typically resulting from lightning strikes,  
are very destructive to telephone equipment connected to  
AC power sources. To minimize damage from these types  
of surges, a surge arrestor is recommended.  
Radio Interference  
Radio interference may occasionally cause buzzing and  
humming in your cordless handset, or clicking noises in  
the base. This interference is caused by external sources  
such as TV, refrigerator, vacuum cleaner, fluorescent  
lighting, or electrical storm. Your unit is NOT  
Changes or modifications to this product not expressly  
approved by Uniden, or operation of this product in any  
way other than as detailed by the owner's manual, could  
void your authority to operate this product.  
DEFECTIVE. If these noises continue and are too  
distracting, please check around your home to see what  
appliances may be causing the problem. In addition, we  
recommend that the base not be plugged into a circuit  
that also powers a major appliance because of the  
potential for interference. Be certain that the antenna on  
the unit is fully extended when needed. In the unlikely  
event that you consistently hear other voices or  
distracting transmissions on your phone, you may be  
receiving radio signals from another cordless telephone  
or other source of interference. If you cannot eliminate  
this type of interference, you need to change to a  
different channel.  
This device complies with part 1 5 of the FCC rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2)  
This device must accept any interference received,  
including interference that may cause undesired  
operation. Privacy of communications may not be  
ensured when using this phone.  
To insure the safety of users, the FCC has established  
criteria for the amount of radio frequency energy various  
products may produce depending on their intended  
usage. This product has been tested and found to comply  
with the FCC's exposure criteria.  
Finally, it should be noted that some cordless telephones  
operate at frequencies that may cause interference to  
nearby TVs and VCRs. To minimize or prevent such  
interference, the base of the cordless telephone should  
not be placed near or on top of a TV or VCR. If  
interference is experienced, moving the cordless  
telephone farther away from the TV or VCR will often  
reduce or eliminate the interference.  
The antenna(s) used for the base-unit must be installed  
to provide a separation distance of at least 20 cm from all  
persons and must not be collocated or operated in  
conjunction with any other antenna or transmitter.  
[49]  
 
Cordless Telephone Privacy  
I.C. Notice  
Cordless telephones are radio devices. Communications  
between the handset and base of your cordless  
telephone are accomplished by means of radio waves  
which are broadcast over the open airways. Because of  
the inherent physical properties of radio waves, your  
communications can be received by radio receiving  
devices other than your own cordless telephone unit.  
Consequently, any communications using your cordless  
telephone may not be private.  
Terminal Equipment  
NOTICE: This equipment meets the applicable Industry  
Canada Terminal Equipment Technical Specifications.  
This is confirmed by the registration number. The  
abbreviation, IC, before the registration number signifies  
that registration was performed based on a Declaration of  
Conformity indicating that Industry Canada technical  
specifications were met. It does not imply that Industry  
Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this  
terminal equipment is marked on the equipment itself.  
The REN assigned to each terminal equipment provides  
an indication of the maximum number of terminals  
allowed to be connected to a telephone interface. The  
termination on an interface may consist of any  
combination of devices subject only to the requirement  
that the sum of the Ringer Equivalence Numbers of all  
the devices does not exceed five.  
RADIO EQUIPMENT  
The term "IC:" before the radio certification number only  
signifies that Industry Canada technical specifications  
were met.  
Operation is subject to the following two conditions: (1)  
this device may not cause interference, and (2) this  
device must accept any interference, including  
interference that may cause undesired operation of the  
device. "Privacy of communications may not be ensured  
when using this telephone."  
[50]  
 
option, repair or replace the defective unit and  
return it to you without charge for parts, service, or  
any other cost (except shipping and handling)  
incurred by warrantor or its representatives in  
connection with the performance of this warranty.  
Warrantor, at its option, may replace the unit with  
a new or refurbished unit. THE LIMITED  
One Year Limited Warranty  
Important: Evidence of original purchase is  
required for warranty service. WARRANTOR:  
UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants,  
for one year, to the original retail owner, this  
Uniden Product to be free from defects in  
WARRANTY SET FORTH ABOVE IS THE SOLE  
AND ENTIRE WARRANTY PERTAINING TO THE  
PRODUCT AND IS IN LIEU OF AND EXCLUDES  
ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED  
OR ARISING BY OPERATION OF LAW,  
INCLUDING, BUT NOT LIMITED TO ANY  
IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE.  
THIS WARRANTY DOES NOT COVER OR  
PROVIDE FOR THE REIMBURSEMENT OR  
PAYMENT OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES. Some states do  
not allow this exclusion or limitation of incidental  
or consequential damages so the above limitation  
or exclusion may not apply to you. LEGAL  
REMEDIES: This warranty gives you specific legal  
rights, and you may also have other rights which  
vary from state to state. This warranty is void  
outside the United States of America and Canada.  
PROCEDURE FOR OBTAINING  
materials and craftsmanship with only the  
limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the  
original user shall terminate and be of no further  
effect 1 2 months after the date of original retail  
sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or  
necessary, (B) modified, altered, or used as part  
of any conversion kits, subassemblies, or any  
configurations not sold by Uniden, (C) improperly  
installed, (D) serviced or repaired by someone  
other than an authorized Uniden service center for  
a defect or malfunction covered by this warranty,  
(E) used in any conjunction with equipment or  
parts or as part of any system not manufactured  
by Uniden, or (F) installed or programmed by  
anyone other than as detailed by the owner's  
manual for this product. STATEMENT OF  
REMEDY: In the event that the product does not  
conform to this warranty at any time while this  
warranty is in effect, warrantor will either, at its  
[51]  
 
PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner's manual  
you are certain that the Product is defective, pack  
the Product carefully (preferably in its original  
packaging). Disconnect the battery from the  
Product and separately secure the battery in its  
own separate packaging within the shipping  
carton. The Product should include all parts and  
accessories originally packaged with the Product.  
Include evidence of original purchase and a note  
describing the defect that has caused you to  
return it. The Product should be shipped freight  
prepaid, by traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
[52]  
 
Memo  
[53]  
 
At Uniden, we'll take care of you!  
Thank you for purchasing a Uniden product. if you have any questions or problems,  
please do not return this product to the place of purchase.  
Our customer care specialists are here to help you! Visit our website at  
www.uniden.com or call our Customer Service Hotline at 1-800-297-1023,  
Monday through Friday, 7 AM to 7 PM or Saturday/Sunday, 9 AM to 5 PM,  
CST. The Customer Service Hotline is closed on holidays.  
Having Trouble?  
Need A Part?  
To order headsets, additional handsets, replacement batteries, or other  
accessories, visit our website at www.uniden.com or call 1-800-554-3988,  
Monday through Friday, 8 AM to 5 PM, CST.  
If you need special assistance due to a disability, or have questions on the  
accessibility features of this product, please call 1-800-874-9314 (voice or  
TTY).  
Help For Our  
Customers with  
Special Needs  
May be covered under one or more of the following U.S. patents:  
4,797,916  
5,533,010  
5,663,981  
5,758,289  
5,864,619  
5,960,358  
6,314,278  
6,788,920  
6,914,940  
5,381,460  
5,574,727  
5,671,248  
5,768,345  
5,893,034  
5,987,330  
6,418,209  
6,788,953  
6,953,118  
5,426,690  
5,581,598  
5,696,471  
5,787,356  
5,912,968  
6,044,281  
6,618,015  
6,839,550  
5,434,905  
5,650,790  
5,717,312  
5,794,152  
5,915,227  
6,070,082  
6,671,315  
6,889,184  
5,491,745  
5,660,269  
5,732,355  
5,801,466  
5,929,598  
6,125,277  
6,714,630  
6,901,271  
5,493,605  
5,661,780  
5,754,407  
5,825,161  
5,930,720  
6,253,088  
6,782,098  
6,907,094  
Other patents pending.  
 
[54]  
UCZZ01501BB(0)  
 

Tiger Games 65 135 User Manual
TRENDnet Network Router TEW711BR User Manual
TRENDnet Network Router TPL 110AP User Manual
Triarch Indoor Furnishings 23141 User Manual
Tricity Bendix Cooktop SIE454 User Manual
Tripp Lite Switch U222 004 R User Manual
Uniden Cordless Telephone ANA 9710 User Manual
Uniden Cordless Telephone EXLA8950 User Manual
Verbatim Computer Drive Memory Cards User Manual
VTech Cordless Telephone mi6877 User Manual