EXP 4240/4241
Series
OWNER'S
MANUAL
Introduction
Uniden 2.4GHz cordless phones are designed and engineered to exacting standards for
reliability, long life, and outstanding performance.
NOTE: Illustrations in this manual are used for explanation purposes. Some illustrations in this
manual may differ from the actual unit. The color of your cordless phone may vary.
▼ Features
•
•
Last Number Redial
10-Number Memory
Dialing
•
•
Hearing Aid Compatible
Find Handset Locator
•
2.4 GHz Extended
Range Technology
AutoTalkTM
•
•
•
•
•
AutoStandbyTM
Pulse/Tone Dialing
20 Channel Autoscan
Earpiece Volume Control
The cordless phone features AutoTalkTM and AutoStandbyTM. AutoTalkTM allows you to
answer a call by just removing the handset from the base so you don't have to waste time
pushing buttons. AutoStandbyTM allows you to hang up by simply returning the handset to the
base.
The UltraClear PlusTM true compander circuitry virtually eliminates background noise.
This innovative technology, together with 20 different channels, provides you with the best
possible reception during all your conversations.
To protect you against misbilled calls which might result from your phone being activated by
other equipment, the cordless phone has Random CodeTM digital security which automatically
selects one of approx. 262,000 digital security codes for the handset and base. Also, the
AutoSecureTM feature electronically locks your phone when the handset is in the base.
If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-1023, Mon-
Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)
For more information on Uniden products and accessories, be sure to visit our web site:
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of
Uniden America Corporation.
Controls and Functions
5. Flash - accesses call waiting (if available)
(p. 5)
1
2
14
6. /tone - switches to tone dialing in pulse
*
10
11
dial mode (p. 6)
4
5
7. Redial/p - redials the last number /
adds a timed pause in a memory
dialing sequence. (p. 5, 6)
3
8. Memory - enters or recalls numbers in
memory (p. 6, 7)
9. Handset Microphone
6
7
8
10. Talk - answers or places calls (p. 5)
11. End - hangs up a phone call / mutes
the ringing tone temporarily (p. 5)
12. Channel - selects another channel for
clearer reception (p. 5)
13. Handset charging contacts
14. Base charging contacts
15 16
12
9
13
1. Handset antenna
2. Handset earpiece
3. Talk/batt low LED - indicates when phone
is in use or the battery is low
15. Find hs - locates the handset (p. 6, 7)
16. Charge / in use LED
4. Vol/
- sets the ringer tone and
earpiece volume (p. 5)
1
Included with Your Phone
• Base Unit • Handset • AC Adapter • Rechargeable Battery •Telephone Cord
• This owner’s manual
Replacement adapters, batteries and other parts may be purchased by calling the Customer
Hotline at 1-800-297-1023, Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support
is closed on holidays.)
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the
terminology explanation.
•
Talk Mode - The handset is off the base and the talk key has been pressed, enabling a dial
tone.
•
Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk
key has not been pressed and there is no dial tone.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability
and need customer service assistance or if you have any questions about how Uniden's
products accommodate persons with disabilities, please call the accessibility voice/TTY line:
1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can
leave a message, and we will call you back. Information is also available on our web site,
Installing the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset
C. Connect the base unit and charge the handset
D. Mount the base unit on a wall
E. Choose the dialing mode
A. Choose the best location
When choosing a location for your new phone, here are some important guidelines you should consider:
Avoid noise sources such as a window
Avoid heat sources, such as
by a street with heavy traffic
radiators, air ducts, and sunlight
Avoid microwave ovens
Avoid television sets and
Avoid excessive moisture,
other electronic equipment
extremely low temperatures,
dust, mechanical vibration,
or shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
•
•
•
•
The location should be close to both a phone jack and a continuous power outlet (one
which is not connected to a switch).
The base and handset should be kept away from sources of electrical noise such as
motors and fluorescent lighting.
The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For bet-
ter reception, place the base as high as possible.
The base should be placed in an open area for optimum range and reception.
2
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the base unit.
NOTE: If your home has specially wired alarm equipment
connected to the telephone line, be sure that
installing the system does not disable your alarm
equipment. If you have questions about what will
disable your alarm equipment, contact your
telephone company or a qualified installer.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into
the jack inside the battery compartment (the connector
notches fit into the grooves of the jack only one way).
Match the wire colors to the polarity label in the battery
compartment, connect the battery and listen for a click to
insure connection.
3) Before replacing the battery cover, pull on the battery
wires slightly. If the connection is secure, the jack will
stay in place. Then place the battery case cover back on
the handset by sliding it upwards until it clicks into place.
NOTE: For optimum performance, use only the Uniden
Battery (BT-905 or BT-1006) supplied with your
phone.
Talk and Standby Times
With average use, your handset battery provides
approximately 6 hours of talk time and approximately 7 days
of standby time. When your handset is not being used and is
left off of the charging cradle, the battery will gradually
discharge. You can achieve optimum battery life and
performance by returning the handset to the charging cradle
after each use. If the handset is left off of the charging cradle, the actual talk time duration will
be reduced respective to the amount of time the handset is off of the charging cradle.
C. Connect the base unit and charge the handset
1) Connect the AC adapter to the DC IN 9V jack and a
standard 120V AC wall outlet.
Route the cord.
2) Set the base unit on a desk or tabletop, and place
the handset in the base unit with the keypad facing
forward.
3) Make sure the charge/in use LED illuminates.
If the LED does not illuminate, check to see that the
AC adapter is plugged in and the handset makes
good contact with the base charging contacts.
NOTICE: Do not place the power cord where it creates
a trip hazard or where it could become
chafed and create a fire or electrical hazard.
NOTE: • Use only the supplied AD-0001 AC
adapter. Do not use any other AC adapter.
• Connect the AC adapter to a continuous
power supply.
• Place the base unit close to the AC outlet to
avoid long extension cords.
3
4) Charge your handset at least 15-20 hours before plugging the phone line.
5) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and a telephone outlet. If your
telephone outlet isn’t modular, contact
your telephone company for assistance.
Modular
D. Mount the base unit on a wall
Standard wall plate mounting
1
3
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter to the DC IN 9V jack.
2) Plug the AC adapter into a standard 120V AC wall
outlet.
3) Plug the telephone line cord into the TEL LINE jack.
5
5
4) Plug the telephone line cord into the telephone outlet.
5) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and down
until the phone is firmly seated.
4
2
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
•
Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the
wall.
•
•
•
Try to mount your phone within 5 feet of a working phone jack to
avoid excessive cord lengths.
Make sure the wall material is capable of supporting the weight of
the base and handset.
Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will be
placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/
16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for
mounting the phone.
2) Refer to steps 1 through 5 above to mount the telephone.
E. Choose the dialing mode
Most phone systems use tone dialing. However, some phone systems (such as in rural areas)
still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default
setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to
change the dialing mode:
1) In standby mode, press and hold the flash key until you hear a confirmation tone.
2) Press the # key to set your phone for pulse dialing. You will hear a confirmation tone.
If you need to reset your phone to tone dialing, press and hold the flash key until you hear the
confirmation tone. Then press the /tone key to restore the tone setting.
*
NOTE: • Make sure your battery pack is fully charged before choosing the dial mode.
• If you are not sure of your dialing system, make a trial call. If the call
connects, leave the setting at tone dialing. Otherwise, set for pulse dialing.
4
Using Your Phone
Making and Receiving Calls
Making a call
1) Remove the handset from the base.
2) Press the talk key. The talk/batt low LED flashes and turns on.
3) Listen for the dial tone.
4) Dial the number.
Receiving a call
If the handset is in the base, simply remove the handset from the base. AutoTalk will
automatically answer the call.
If the handset is off the base, press the talk key or any number key.
Hanging up
Press the end key or return the handset to the base.
Redialing the last dialed number
1) Remove the handset from the base.
2) Press the talk key. The talk/batt low LED flashes and turns on.
3) Listen for the dial tone.
4) Press the redial/p key.
Flash and Call Waiting
If you have Call Waiting and a call waiting tone sounds while you are
on a call, press the flash key to accept the waiting call. There is a
short pause, and you will hear the new caller. To return to the original
caller, press the flash key again.
NOTE: You must subscribe to call waiting through your telephone
company.
Adjusting the Ringer and Earpiece Volume
Ringer tone and volume
key repeatedly to listen to the four
ringer tones and volume combinations. The last ringer tone heard will be selected as the
phone’s ring tone setting.
Earpiece volume
The handset earpiece volume settings can only be adjusted during a call. Use the vol/
key
to scroll through the volume levels and select the one that works best for you. When you hang
up, the phone keeps the volume setting.
Temporarily Mute Ringer
If the handset is off the base, simply press the end key to temporarily mute the incoming ring.
The ringer will sound with the next incoming call.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases.
If you pass the range limits of the base, your call will terminate within one minute.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s
channel for clear operation. This function works only when the phone is in use.
Press the channel key. The talk/batt low LED flashes, indicating the phone is changing to
another channel. For more information on interference, refer to “Radio Interference” on
page 10.
5
Find Handset
To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds.
The handset stops beeping when any key is pressed, when it is returned to the base, or when
the find hs key is pressed. The handset also stops beeping when an incoming call is received.
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is programmed to
eliminate functions in order to save power. If the phone is not in use, the talk/batt low LED
flashes when the battery pack is low.
If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the base for charging.
NOTE: • Even when the battery pack is not being used, it will gradually discharge over a long
period of time. For optimum performance, be sure to return the handset to the base
unit after each telephone call.
• Dial mode setting, last number dialed and numbers stored in memory locations
are retained for up to one minute while you replace the battery pack.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on the
handset once a month.
Dampen a cloth with plain water. Gently rub the damp cloth over
the charging contacts until all visible dirt is removed. Dry the
contacts thoroughly before returning the handset to the base.
Caution: Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface of the
telephone and damage the finish.
Tone Dialing Switch-over
If your telephone company requires pulse dialing, you can switch over
to tone dialing after the call connects. This feature is useful when you
need tone dialing to use any automated menu systems, such as
telephone bank tellers, telephone prescription refills, customer support
menus, etc.
If your phone is set to pulse dialing mode, make your call normally.
Once your call connects, press the /tone key. Any digits you enter
*
from then on will be sent as tone digits. When this particular call ends,
the phone automatically returns to pulse dialing mode.
Using the Speed Dial Memory
Storing Numbers in Speed Dial Memory
Your cordless phone can store up to ten numbers in the speed dial memory.
1) When the phone is in standby mode, press the memory key. The talk/batt low LED flashes.
2) Use the keypad to enter the phone number; each number can be up to 20 digits.
6
3) If you need the phone to pause during the dialing sequence, press
the redial/p key to insert a two-second delay between the
numbers. You can enter multiple pauses to increase the delay.
Each pause counts as a digit.
4) Press the memory key again.
5) To store this number as one of the ten speed dial numbers, enter a
digit from 0 to 9. If there is already a number in that speed dial
setting, it will overwrite the previously stored number without
warning. You will hear a confirmation tone indicating that the
number has been stored.
NOTE: When storing numbers into memory, if the handset is idle
(i.e., no key is pressed) for more than 30 seconds, it will beep rapidly, and the phone
will return to standby mode.
Dialing a Stored Number
1) When the phone is in standby mode, press the talk key, and listen for a dial tone.
2) Press the memory key and enter the speed dial entry (0-9) that has the stored number you
want to dial. (If you enter a digit that does not contain a stored number, the handset will
beep rapidly, and the phone will not dial.)
Chain Dialing
The speed dial memory is not limited to phone numbers. You can store any number (up to 20
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
For example, you can save your bank account number to speed dial memory. When you call
your bank's telephone teller service and are prompted to enter your account number, simply
press the memory key and the speed dial number where you stored your account number.
Erasing a Stored Number from Memory
1) With the phone in standby mode, press the memory key twice.
2) Press the number of the speed dial entry. A tone indicates that the stored number is
erased from memory.
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base
unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. In the rare
situation that you suspect another cordless telephone is using the same security code, you
can change the code.
1) Remove the handset from the base unit. Press and hold the find hs key on the base.
2) While holding the find hs key, place the handset in the base unit. Leave the handset in the
base for more than three seconds. A new random security code is set.
NOTE: If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically next time the battery pack is charged.
Operational Frequency
Frequency
924.516925 – 926.704425 MHz
2,405.155942 – 2,411.718441 MHz
7
Troubleshooting
If your cordless telephone is not performing to your expectations, please try these simple
steps first. If these steps do not solve your problem, please call our Customer Hotline at 1-
800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed
on holidays.)
NOTE: Do not attempt to service this unit yourself. Servicing must be performed by qualified
personnel.
Symptom
Suggestion
The charge/in use LED won’t
illuminate when the handset is
placed in the base.
•
•
•
Make sure the AC adapter is plugged into the base and a wall outlet.
Make sure the handset is properly seated in the base.
Make sure that the charging contacts on the handset are clean.
The audio sounds weak and/or
scratchy.
•
Move the handset and/or base away from metal objects or
appliances and try again.
Press the channel key to help eliminate background noise.
Check both ends of the telephone line cord.
•
•
Can’t make or receive calls.
•
•
•
•
•
Make sure the AC adapter is plugged into the base and a wall outlet.
Disconnect the AC adapter for a few minutes. Then reconnect it.
Change the digital security code. (see page 7.)
Make sure that the handset is not too far from the base.
Check the dialing mode used by your telephone company.
The handset doesn’t ring or
receive a page.
•
•
•
•
The battery pack may be weak. Charge the battery for 15-20 hours.
The handset may be too far away from the base.
Move the base away from appliances or metal objects.
Change the digital security code. (see page 7.)
Severe noise interference
•
Keep the handset away from microwave ovens, computers, remote
control toys, wireless microphones, alarm systems, intercoms, room
monitors, fluorescent lights, and electrical appliances.
Move the base to another location or turn off the source of
interference.
•
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion,
please follow these steps.
Case
Action
If the handset or base is exposed Wipe off the liquid, and use as normal.
to moisture or liquid, but it only
affects the exterior plastic housing.
If moisture or liquid has entered the Handset:
1. Remove the battery cover and leave it off for ventilation.
plastic housing (i.e. liquid can be
heard in the phone or liquid has
entered the handset battery
compartment or vent openings on
the base).
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at
least 3 days.
4. Once the handset is completely dry, reconnect the battery pack and the
battery cover.
5. Recharge the handset’s battery pack for 20 hours before using again.
Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical
power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the
battery pack to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work,
please call our Customer Service Hotline at 1-800-297-1023.
8
SAVE THESE INSTRUCTIONS
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. Do not
open or mutilate the battery, and disconnect the battery before
shipping this product.
Precautions!
Before you read anything else, please observe the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to
be waterproof. To reduce the risk of fire, electrical shock, or
damage to the unit, DO NOT expose this unit to rain or moisture.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone
company.
An applicable Universal Service Order Codes (USOC)
certification for the jacks used in this equipment is provided (i.e.,
RJ11C) in the packaging with each piece of approved terminal
equipment.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for
details.
The REN is used to determine the number of devices that may
be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
isn’t practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
Please follow instructions for repairing, if any (e.g. battery
replacement section); otherwise do not substitute or repair any
parts of the device except as specified in this manual.
Connection to party line service is subject to state tariffs. Contact
the state public utility commission, public service commission or
corporation commission for information. This equipment is
hearing aid compatible.
Rechargeable Nickel-Cadmium Battery
Warning
• This equipment contains a rechargeable nickel-cadmium
battery.
• Cadmium is a chemical known to the State of California to
cause cancer.
• The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable nickel-cadmium battery used
in this equipment in any charger other than the one designed to
charge this battery as specified in the owner’s manual.
Using another charger may damage the battery or cause the
battery to explode.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
• Uniden voluntarily participates in an RBRC® industry program
to collect and recycle nickel-cadmium batteries at the end of
their useful life, when taken out of service within the United
States.
The RBRC® program provides a convenient alternative to
placing used nickel-cadmium batteries into the trash or
municipal waste stream, which is illegal in some areas.
• Through the RBRC® program, Uniden makes it easy for you to
drop off the used battery at local retailers of replacement
nickel-cadmium batteries. You may also contact your local
recycling center for information on where to return the used
battery. Please call 1-800-8-BATTERY for information on Ni-Cd
battery recycling in your area. Uniden's involvement in this
program is part of its commitment to protecting our
environment and conserving natural resources.
• RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Uniden works to reduce lead content in our PVC coated cords in
our product and accessories.
Warning!
Should you experience trouble with this equipment, please
contact Uniden customer service at 800-297-1023. If the
equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the
equipment until the problem is resolved.
The cords on this products and/or accessories contain lead, a
chemical known to the State of California to cause birth defects
or other reproductive harm. Wash hands after handling.
Important Safety Instructions
NOTICE: According to telephone company reports, AC electrical
surges, typically resulting from lightning strikes, are very
destructive to telephone equipment connected to AC power
sources. To minimize damage from these types of surges, a
surge arrestor is recommended.
Changes or modifications to this product not expressly approved
by Uniden, or operation of this product in any way other than as
detailed by the owner's manual, could void your authority to
operate this product.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation. Privacy of communications, may not be
ensured when using this phone.
To insure the safety of users, the FCC has established criteria
for the amount of radio frequency energy various products may
produce depending on their intended usage. This product has
been tested and found to comply with the FCCís exposure
criteria. For body worn operation, the FCC RF exposure
guidelines were also met when used with the Uniden
accessories supplied or designed for this product. Use of other
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during
an electrical storm. There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of
the leak.
4. Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible battery disposal
instructions.
5. Do not disassemble any component of this product.
9
accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
One Year Limited Warranty
Important:Evidence of original purchase is required for warranty
service.
Radio Interference
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions
set out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C)
improperly installed, (D) serviced or repaired by someone other than
an authorized Uniden service center for a defect or malfunction
covered by this warranty, (E) used in any conjunction with
equipment or parts or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone other than as
detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective unit
and return it to you without charge for parts, service, or any other
cost (except shipping and handling) incurred by warrantor or its
representatives in connection with the performance of this warranty.
Warrantor, at its option, may replace the unit with a new or
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE
IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE
PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE
FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this
exclusion or limitation of incidental or consequential damages so the
above limitation or exclusion may not apply to you.
Radio interference may occasionally cause buzzing and
humming in your cordless handset, or clicking noises in the
base. This interference is caused by external sources such as
TV, refrigerator, vacuum cleaner, fluorescent lighting, or
electrical storm. Your unit is NOT DEFECTIVE. If these noises
continue and are too distracting, please check around your
home to see what appliances may be causing the problem. In
addition, we recommend that the base not be plugged into a
circuit that also powers a major appliance because of the
potential for interference. Be certain that the antenna on the unit
is fully extended when needed.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving
radio signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference,
you need to change to a different channel.
Finally, it should be noted that some cordless telephones
operate at frequencies that may cause interference to nearby
TVs and VCRs. To minimize or prevent such interference, the
base of the cordless telephone should not be placed near or on
top of a TV or VCR. If interference is experienced, moving the
cordless telephone farther away from the TV or VCR will often
reduce or eliminate the interference.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications
between the handset and base of your cordless telephone are
accomplished by means of radio waves which are broadcast
over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices
other than your own cordless telephone unit. Consequently, any
communications using your cordless telephone may not be
private.
LEGAL REMEDIES: This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
This warranty is void outside the United States of America and
Canada.
I.C. Notice
TERMINAL EQUIPMENT
Notice:This equipment meets the applicable Industry
Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation,
IC, before the registration number signifies that registration was
performed based on a Declaration of Conformity indicating that
Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment.
PROCEDURE FOR OBTAINING PERFORMANCE OF
WARRANTY: If, after following the instructions in the owner’s
manual you are certain that the Product is defective, pack the
Product carefully (preferably in its original packaging). Disconnect
the battery from the Product and separately secure the battery in its
own separate packaging within the shipping carton. The Product
should include all parts and accessories originally packaged with
the Product. Include evidence of original purchase and a note
describing the defect that has caused you to return it. The Product
should be shipped freight prepaid, by traceable means, to warrantor
at:
Notice:The Ringer Equivalence Number (REN) for this
terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an
indication of the maximum number of terminals allowed to
be connected to a telephone interface. The termination on
an interface may consist of any combination of devices
subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed
five.
Uniden America Service
4700 Amon Carter Blvd. Fort Worth, TX 76155
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies
that Industry Canada technical specifications were met.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device. "Privacy of communications
may not be ensured when using this telephone".
10
Having Trouble or Need a Part?
Our customer care specialists are here to help you! Visit our website at
www. uniden.com or call our Customer Hotline at 1-800-297-1023
,
Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone
support is closed on holidays.)
4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010
5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981
5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289
5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619
5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358
5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278
6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920
6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940
6,953,118 7,023,176
Other patents pending.
©2006 Uniden America Corporation, Fort Worth, Texas
Printed in China.
Contains additional foreign articles.
UPZZ01077ZZ(0)
|