Universal Electronics Universal Remote MILLENNIUMTM 3 User Manual

Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 1  
MILLENNIUM 3  
Universal Remote Control  
Users Guide  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 3  
INTRODUCTION  
The Universal Electronics Millennium™ 3 is our latest  
generation universal remote control.It is designed to  
operate all of the features of your cable converter and  
only the most-used features of your TV (e.g.,Volume  
Up/Down) andVCR (e.g.,Play,Stop,Fast Forward,  
Rewind,Pause,and TV/VCR Select).Moreover,the  
Millennium 3 is packed with easy-to-use features such as:  
Preprogrammed codes to operate the cable converter  
supplied by your cable system provider  
Preprogrammed technology for easy setup  
Color-coded keys to quickly locate popular functions  
Cable ID Lock to lock your remote control for use only  
with the cable converter  
Code Search to help program control of older or  
discontinued components  
Option key for assigning your favorite channels  
Shift key for access to cableVideo On Demand (VOD)  
features and TV channel changing capability  
Before you can use your new remote control,you will  
need to program it to operate the specific home enter-  
tainment components you wish to control.Follow the  
instructions detailed in this manual to set up your  
Millennium 3 and enjoy your new remote control.  
3
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 4  
FEATURES AND FUNCTIONS  
Use the illustration below to locate Millennium 3 features  
and then study the Key Charts (on the next two pages) to  
learn how they function.  
4
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 5  
Key Charts  
The LED (red light) blinks to show that  
the remote control is working and is  
sending signals.  
Press VCR,TV,or CBL once to turn on  
or off a selected component.  
Use SETUP for all programming  
sequences.  
Use the keypad (0 ~ 9) to directly select  
channels (e.g.,09 or 31).  
Press MUTE once to turn sound off  
or on.  
Press ENTER once after entering channel  
numbers on some TV models.  
Use volume + (or volume -) to raise (or  
lower) the sound volume.  
Use CH + (or CH -) to select the next higher  
(or lower) channel.  
Press LAST once to recall the last channel  
and to page back one screen in the  
main menu.  
Use FAV to cycle through your favorite  
channels that are stored in your cable  
converter.  
Use GUIDE to display the program guide.  
Press PPV/LOCK once to display the pay  
per view menu or to lock out a specific  
channel on your cable converter.  
Use EXIT to exit out of your cable  
converters menu and guide.  
Use cursor keys to move the cursor in  
the program guide and menu screens.  
continued on next page...  
5
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 6  
Key Charts (continued)  
Use SELECT/OK to choose options,PPV  
events,and to tune programs from the  
program guide.  
Use INFO to display current channel and  
program information.  
Press MENU once to display your cable  
converters screen menu.  
Use PAGE (or PAGE ) to page up  
or down) through menu screens and the  
program guide.  
Use OPTION to program one-button  
selection of your favorite channels (see  
page 24).  
Use SHIFT to access features on your  
TVs channels and cable systemsVideo  
On Demand (VOD) (see page 21).  
In the VCR and TV modes,use the REW,  
PLAY,FF,REC,STOP,and PAUSE keys to  
control yourVCR.To record a program,  
press REC twice.  
Reserved for cable converter features  
(see your cable converter manual).  
Press TV/VCR once to switch theVCR to  
view TV channels or tape.  
6
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 7  
INSTALLING BATTERIES  
1.  
2.  
On the back of the Millennium 3,push the tab  
and lift off the battery cover.  
Obtain two (2) fully-charged AA alkaline bat-  
teries.Match the + and – marks on the batter-  
ies to the + and – marks in the battery case,  
then insert the new batteries.  
3.  
4.  
Press the battery cover back into place.The tab  
should click when the cover is locked.  
Test the unit by any mode key (e.g.VCR,TV,or  
CBL).If the batteries are inserted correctly,the  
LED will blink once.  
NOTE: Whenever batteries need replacement, the Millennium 3  
will blink twice with every key press. Simply replace the batteries  
and the Millennium 3 will be restored to its full functionality,  
complete with your favorite settings.  
7
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 8  
PROGRAMMING TV CONTROL  
NOTE: If you own a TV/VCR combination, skip this section and  
performProgramming TV/VCR Combo Control”on page 16.  
Locate the brand name of your TV in the Setup Codes For  
TVs section below,and write it in the following space.  
TV Brand: __________________________________  
The brands are listed in alphabetical order with the most  
popular codes listed first.You will use one of these codes  
to program the Millennium 3 to operate your TV:  
1.  
2.  
Turn on the TV.  
On the Millennium 3,press TV once. Press and  
hold SETUP until the LED blinks twice,then  
release SETUP.  
3.  
Enter the first four-digit code for your TV. If  
you perform this procedure correctly,the LED  
will blink twice.  
NOTE: If the LED did not blink twice after entering  
the codes last digit, then repeat steps 2 through 3 and  
try entering the same code again.  
4.  
5.  
Aim the Millennium 3 at your TV and press TV  
once.The TV should turn off.If it does not  
respond,repeat steps 2-3,trying each code for  
your brand until you find one that works.If it  
still does not work,try searching for the code  
(see Searching For Your Code on page 22).  
Write your TV code in the boxes below for  
future reference.  
NOTE: Remember, to use the Millennium 3 to operate your TV,  
press TV first.  
Setup Codes for TVs:  
A-Mark  
AOC  
0003  
0030,0019,0003,0052,0185  
Abex  
0032  
0093  
0046  
0092  
0030  
0179  
0177  
Admiral  
Adventura  
Aiko  
Akai  
Alaron  
Ambassador  
8
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 9  
Anam  
0180  
Anam National 0055  
Archer  
0003  
Audiovox  
Baysonic  
Belcor  
0451,0180,0003,0092,0623  
0180  
0019  
Bell & Howell  
Bradford  
Brockwood  
Broksonic  
CXC  
0154,0016  
0180  
0019  
0236,0463,0003  
0180  
Candle  
0030,0056,0046,0186  
Carnivale  
Carver  
0030  
0054  
Celebrity  
Cineral  
0000  
0451,0092  
Citizen  
0060,0030,0056,0039,0046,0092,0186,0280  
Clairtone  
Concerto  
Contec  
0185  
0056  
0180,0185  
0180  
Craig  
Crosley  
0054  
Crown  
0180,0039  
Curtis Mathes  
0047,0054,0154,0051,0451,0093,0060,0030,0145,0056,  
0016,0039,0166,0466  
Daewoo  
Daytron  
Denon  
0451,0019,0039,0092,0623,0624  
0019  
0145  
Dumont  
Dwin  
Electroband  
Emerson  
0017,0019  
0720,0774  
0000,0185  
0154,0236,0463,0180,0282,0178,0019,0179,0039,0038,  
0177,0185,0280,0623,0624  
Envision  
Fisher  
0030  
0154,0159  
Fujitsu  
0179  
Funai  
0180,0179,0171  
Futuretech  
GE  
0180  
0047,0051,0451,0093,0282,0178,0021,0055,0027,0135  
Gibralter  
GoldStar  
Gradiente  
Grunpy  
Hallmark  
0017,0030,0019  
0030,0178,0019,0056,0001,0032  
0053,0056  
0180,0179  
0178  
Harley Davidson 0179  
Harman/Kardon 0054  
Harvard  
Hitachi  
Infinity  
Inteq  
JBL  
JCB  
0180  
0145,0056,0032,0038,0151  
0054  
0017  
0054  
0000  
continued on next page...  
9
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 10  
Setup Codes for TVs (continued):  
JVC  
0053  
Janeil  
0046  
KEC  
0180  
KTV  
0180,0030,0039,0185,0280  
Kaypani  
Kenwood  
Kloss  
0052  
0030,0019  
0024,0046  
LG  
0056  
LXI  
0047,0054,0154,0156,0178  
Logik  
0016  
Luxman  
MEI  
0056  
0185  
MGA  
0150,0030,0178,0019  
MTC  
0060,0030,0019,0056,0185  
Magnavox  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
Midland  
Minutz  
Mitsubishi  
Motorola  
Multitech  
NAD  
0054,0030,0179,0020,0024,0096,0186,0187,0386  
0016  
0054,0030  
0250  
0178,0145,0003  
0154,0250,0150,0178,0056,0016  
0047,0017,0051,0039,0032,0135  
0021  
0093,0150,0178,0019  
0093,0055  
0180  
0156,0178,0166  
0030,0019,0056,0497  
0092  
NEC  
NTC  
Nikko  
Noshi  
0030,0178,0092  
0018  
Onwa  
0180  
Optimus  
Optonica  
Orion  
Panasonic  
Penney  
0154,0250,0166  
0093,0165  
0236,0463,0179  
0051,0250,0055  
0047,0156,0051,0060,0030,0178,0021,0019,0018,0056,  
0039,0003,0027,0032,0135  
Philco  
0054,0463,0030,0145,0019,0020,0096  
Philips  
Pilot  
0054  
0030,0019,0039  
Pioneer  
Portland  
Prism  
0038,0166  
0019,0039,0092  
0051  
Proscan  
Proton  
Pulsar  
0047  
0178,0003,0052,0466  
0017,0019  
Quasar  
RCA  
Radio Shack  
Realistic  
0051,0250,0165,0055  
0047,0051,0093,0019,0018,0038,0090,0135  
0047,0154,0165,0180,0030,0178,0019,0056,0039,0032  
0154,0165,0180,0030,0178,0019,0056,0039,0032  
10  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 11  
Rhapsody  
Runco  
0185  
0017,0030,0497  
SSS  
0180,0019  
Sampo  
0030,0039,0032,0052  
Samsung  
Samsux  
Sansei  
0060,0030,0178,0019,0056,0032  
0039  
0451  
Sansui  
0463  
Sanyo  
0154,0146,0159  
Scimitsu  
Scotch  
0019  
0178  
Scott  
0236,0180,0178,0019,0179  
Sears  
0047,0054,0154,0156,0178,0179,0056,0146,0159,0171  
Semivox  
Semp  
0180  
0156  
Sharp  
0093,0165,0039,0386  
0019  
0016  
0186,0187  
0000,0080  
0180,0178,0179,0186  
0003  
Shogun  
Signature  
Simpson  
Sony  
Soundesign  
Spectricon  
Squareview  
Starlite  
0171  
0180  
Supre-Macy  
Supreme  
Sylvania  
Symphonic  
TMK  
0046  
0000  
0054,0030,0020,0096  
0171  
0178,0056,0177  
0093  
Tandy  
Tatung  
0055,0003  
0051,0250  
0179  
Technics  
Technol Ace  
Techwood  
Teknika  
0051,0056,0003  
0054,0180,0150,0060,0019,0179,0056,0016,0039,  
0092,0186  
Telefunken  
Toshiba  
Tosonic  
0056  
0154,0156,0060  
0185  
Totevision  
Universal  
0039  
0027  
Vector Research 0030  
Victor  
0053  
Vidikron  
Vidtech  
Viking  
Wards  
0054  
0178,0019  
0046  
0054,0165,0030,0178,0021,0019,0179,0056,0016,0020,  
0027,0080,0096  
White Westinghouse 0623,0624  
Yamaha  
Zenith  
Zonda  
0030,0019  
0017,0016,0092  
0003  
11  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 12  
PROGRAMMING VCR CONTROL  
NOTE: If you own a TV/VCR combination, skip this section and  
performProgramming TV/VCR Combo Control”on page 16.  
Locate the brand name of yourVCR in the Setup Codes For  
VCRs section below,and write it in the following space.  
VCR Brand: __________________________________  
The brands are listed in alphabetical order with the most  
popular codes listed first.You will use one of these codes  
to program the Millennium 3 to operate yourVCR:  
1.  
2.  
Turn on yourVCR and insert a video cassette.  
On the Millennium 3,press VCR once. Press  
and hold SETUP until the LED blinks twice,  
then release SETUP.  
3.  
Enter the first four-digit code for yourVCR.If  
you perform this procedure correctly,the LED  
will blink twice.  
NOTE: If the LED did not blink twice after entering  
the codes last digit, then repeat steps 2 through 3 and  
try entering the same code again.  
4.  
Aim the Millennium 3 at yourVCR and press  
VCR once.TheVCR should turn off.If yourVCR  
remote control does not have a POWER  
key, press PLAY. If theVCR does not respond,  
repeat steps 2-3,trying each code listed for your  
brand until you find one that works.If theVCR  
still does not work ,try searching for the code  
(see Searching For Your Code on page 22).  
5.  
Write yourVCR code in the boxes below for  
future reference.  
NOTE: Remember, to use the Millennium 3 to operate your VCR,  
press VCR first.  
Setup Codes for VCRs:  
Admiral  
Adventura  
Aiko  
0048  
0000  
0278  
Aiwa  
Akai  
0037,0000,0307  
0041,0061,0106  
American High 0035  
Asha 0240  
12  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 13  
Audiovox  
Beaumark  
Bell & Howell  
Broksonic  
CCE  
0037  
0240  
0104  
0184,0121,0209,0002,0479  
0072,0278  
Calix  
0037  
Canon  
0035  
Capehart  
Carver  
0020  
0081  
Cineral  
0278  
Citizen  
0037,0278  
Colt  
0072  
Craig  
0037,0047,0240,0072,0271  
Curtis Mathes  
Cybernex  
Daewoo  
Daytron  
Denon  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
0060,0035,0041,0162  
0240  
0045,0278,0020,0561  
0020  
0042  
0000  
0037  
0037  
0032  
Emerson  
0037,0184,0000,0121,0043,0209,0002,0278,0061,0208,  
0212,0479,0561  
Fisher  
Fuji  
0047,0104,0054,0066  
0035,0033  
Funai  
0000  
GE  
0060,0035,0048,0240,0202  
Garrard  
GoVideo  
GoldStar  
Gradiente  
HI-Q  
0000  
0526  
0037,0038  
0000,0008  
0047  
Harley Davidson 0000  
Harman/Kardon 0081,0038  
Harwood  
Headquarter  
Hitachi  
JVC  
Jensen  
KEC  
0072  
0046  
0000,0042,0041,0105  
0067,0041,0008  
0041  
0037,0278  
0072  
KLH  
Kenwood  
Kodak  
LXI  
0067,0041,0038  
0035,0037  
0037  
Lloyds  
Logik  
0000,0208  
0072  
MEI  
0035  
MGA  
0240,0043,0061  
MGN Technology 0240  
MTC  
Magnasonic  
0240,0000  
0278  
continued on next page...  
13  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 14  
Setup Codes for VCRs (continued):  
Magnavox  
Magnin  
0035,0039,0081,0000,0149  
0240  
Marantz  
Marta  
0035,0081  
0037  
Matsushita  
Memorex  
0035,0162  
0035,0037,0048,0039,0047,0240,0000,0104,0162,0046,  
0307  
Minolta  
Mitsubishi  
Motorola  
Multitech  
NEC  
0042,0105  
0048,0067,0043,0061  
0035,0048  
0000,0072  
0104,0067,0041,0038  
Nikko  
0037  
Nikon  
0034  
Noblex  
Olympus  
Optimus  
Optonica  
Orion  
0240  
0035  
0037,0048,0104,0162  
0062  
0184,0002,0479  
Panasonic  
Penney  
Pentax  
Philco  
0035,0162,0077,0225  
0035,0037,0240,0042,0038,0054  
0042,0105  
0035,0209,0479  
Philips  
Pilot  
0035,0081,0062  
0037  
Pioneer  
Portland  
Profitronic  
Proscan  
Protec  
0067  
0020  
0240  
0060,0202  
0072  
Pulsar  
0039  
Quarter  
Quartz  
Quasar  
RCA  
0046  
0046  
0035,0162,0077  
0060,0035,0048,0240,0042,0149,0077,0105,0106,0202  
Radio Shack  
Radix  
0000  
0037  
Randex  
Realistic  
Ricoh  
0037  
0035,0037,0048,0047,0000,0104,0062,0046,0066  
0034  
Runco  
0039  
STS  
0042  
Samsung  
Sanky  
0240,0045  
0048,0039  
Sansui  
Sanyo  
0000,0067,0041,0271,0479  
0047,0240,0104,0046  
Scott  
0184,0045,0121,0043,0212  
Sears  
0035,0037,0047,0000,0042,0104,0046,0054,0066,0105  
Semp  
0045  
Sharp  
0048,0062  
14  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 15  
Shintom  
Shogun  
Singer  
0072  
0240  
0072  
Sony  
0035,0032,0000,0033,0034  
0035,0081,0000,0043  
0000  
0240,0208  
0041  
0000,0041  
0035,0162  
0035,0037,0000  
0000  
0045,0043,0066,0212  
0037,0240  
0240  
Sylvania  
Symphonic  
TMK  
Tatung  
Teac  
Technics  
Teknika  
Thomas  
Toshiba  
Totevision  
Unitech  
Vector  
0045  
Vector Research 0038  
Video Concepts 0045,0061  
Videosonic  
Wards  
0240  
0060,0035,0048,0047,0081,0240,0000,0042,0072,0149,  
0062,0212  
White Westinghouse 0278  
XR-1000  
Yamaha  
Zenith  
0035,0000,0072  
0038  
0039,0000,0033,0034  
15  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 16  
PROGRAMMING TV/VCR COMBO CONTROL  
Locate the brand name of your TV/VCR Combo in the  
Setup Codes For TV/VCR Combos section below,and write  
it in the following space.  
TV/VCR Combo Brand: ________________________  
The brands are listed in alphabetical order with popular  
codes listed first.You will use one of these codes to pro-  
gram the Millennium 3 to operate your TV/VCR Combo:  
1.  
Turn on your TV/VCR Combo and insert a  
video cassette.  
2.  
On the Millennium 3,press VCR once. Press  
and hold SETUP until the LED blinks twice,  
then release SETUP.  
3.  
4.  
Enter the first four-digit code for your TV/VCR  
Combo.If you perform this procedure correct-  
ly,the LED will blink twice.  
NOTE: If the LED did not blink twice after entering  
the codes last digit, then repeat steps 2 through 3 and  
try entering the same code again.  
Aim the Millennium 3 at your TV/VCR Combo  
and press VCR once.The unit should turn off.If  
it does not respond,repeat steps 2-3,trying  
each code listed for your brand until you find  
one that works.If it still does not work,try  
searching for the code (see Searching For Your  
Code on page 22).  
5.  
If you’ve located a TV/VCR setup code that  
works your TV/VCR Combo and a separate  
TV code is also listed, you’ll need to program  
this code into the Millennium 3 to access vol-  
ume control (see Programming TV Control on  
page 8).  
If there is no separate TV code listed,you will  
need to perform the following steps to access  
volume control:  
a. Press and hold SETUP until the LED blinks  
twice,then release SETUP.  
b. Enter 9 - 9 - 3.The LED will blink twice.  
c. Press VCR once.The LED will blink twice.  
16  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 17  
6.  
Write your TV/VCR Combo code in the boxes  
below for future reference.  
NOTE: Remember, to use the Millennium 3 to operate your  
TV/VCR Combo, press VCR first.  
Setup Codes for TV/VCR Combos:  
American High 0035 (for TV use 0051)  
Brocksonic  
Colt  
0002,0294,  
0072  
Curtis Mathis  
Daewoo  
Emerson  
Funai  
0035 (for TV use 0051)  
0278  
0002,0294,0479  
0000  
GE  
0035 (for TV use 0051),0060 (for TV use 0047),  
0048 (for TV use 0093),0240  
Hitachi  
HQ  
0035 (for TV use 0051),0000  
0000  
Lloyds  
0000  
MGA  
0240  
Magnavox  
Magnin  
Memorex  
Mitsubishi  
Orion  
0081 (for TV use 0054),0035 (for TV use 0051),0000  
0240  
0037,0162 (for TV use 0250)  
0048 (for TV use 0093)  
0002,0294,0479  
Panasonic  
Penney  
Quasar  
RCA  
0035 (for TV use 0051),0162 (for TV use 0250)  
0035 (for TV use 0051),0240,0162 (for TV use 0250)  
0035 (for TV use 0051),0162 (for TV use 0250)  
0060 (for TV use 0047),0035 (for TV use 0051),  
0048 (for TV use 0093)  
Sansui  
Sanyo  
0000,0479  
0240  
Sears  
Sharp  
Sony  
Symphonic  
Zenith  
0000,0037  
0048 (for TV use 0093)  
0032 (for TV use 0000)  
0000  
0000  
17  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 18  
PROGRAMMING CABLE CONVERTER  
(OR DBS RECEIVER) CONTROL  
The Millennium 3 is preprogrammed at the factory to  
operate the cable converter given to you by your cable  
company. However, if you have another brand or model  
of cable converter or satellite receiver that you would like  
to control,then you’ll need to perform the following  
instructions to unlock the cable key,enter in a new code,  
and lock the cable key again.  
To unlock the Cable key:  
1.  
2.  
Turn on the Cable Converter or DBS Receiver.  
On the Millennium 3,press CBL once. Press  
and hold SETUP until the LED blinks twice,  
then release SETUP.  
3.  
4.  
Enter 9 - 9 - 7.The LED will blink twice.  
Press CH – once.The LED will blink twice.  
To program the Cable key:  
1.  
Locate the brand name of your Cable Converter  
(or Direct Broadcast Satellite Receiver) in the  
Setup Codes For Cable Converters (or Setup  
Codes For DBS Receivers) section starting on the  
next page,and write it in the appropriate space.  
Cable Converter Brand: ________________  
or  
DBS Receiver Brand: __________________  
The brands are listed in alphabetical order  
with the most popular codes listed first.You  
will use one of these codes to reprogram the  
Millennium 3 to operate your Cable Converter  
or DBS Receiver.  
2.  
3.  
On the Millennium 3,press CBL once. Press  
and hold SETUP until the LED blinks twice,  
then release SETUP.  
Enter the first four-digit code for your Cable  
Converter or DBS Receiver.If you perform this  
procedure correctly,the LED will blink twice.  
NOTE: If the LED did not blink twice after entering  
the codes last digit, then repeat steps 2 through 3 and  
try entering the same code again.  
18  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 19  
4.  
5.  
Aim the Millennium 3 at your Cable Converter  
or DBS Receiver and press CBL once.The unit  
should turn off.If it does not respond,repeat  
steps 2-3,trying each code listed for your brand  
until you find one that works.If it still does not  
work ,try searching for the code (see Searching  
For Your Code on page 22).  
Write your Cable Converter or DBS Receiver  
code in the boxes below for future reference.  
NOTE: Remember, to use the Millennium 3 to operate your Cable  
Converter or DBS Receiver, press CABLE first.  
To lock the Cable key:  
1.  
On the Millennium 3,press CBL once. Press  
and hold SETUP until the LED blinks twice,  
then release SETUP.  
2.  
3.  
Enter 9 - 9 - 7.The LED will blink twice.  
Press CH + once.The LED will blink twice.  
Setup Codes for Cable Converters:  
ABC  
0003,0008,0017,0013  
ABC Cable  
Americast  
Contec  
0033  
0899  
0019  
General Instrument 0476,0276,0810  
GoldStar  
Hamlin  
Jerrold  
Macom  
Memorex  
Movie Time  
NSC  
0144  
0020,0259  
0003,0012,0476,0276,0810  
0033  
0000  
0063  
0063  
Oak  
0019  
Optimus  
Panasonic  
Paragon  
Pioneer  
Pulsar  
0021  
0000,0107,0021  
0000  
0144,0533  
0000  
Quasar  
RCA  
0000  
0021  
Regal  
Runco  
0020,0259  
0000  
continued on next page...  
19  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 20  
Setup Codes for Cable Converters (continued):  
Samsung  
0144  
Scientific Atlanta 0008,0477,0017,0277,0774,0877  
Sprucer  
Starcom  
TV86  
0021  
0003  
0063  
Tocom  
Toshiba  
Viewstar  
Zenith  
0012,0013  
0000  
0063  
0000,0525,0899  
Setup Codes for DBS Receivers:  
AlphaStar  
Echostar  
Expressvu  
0772  
0775  
0775  
General Instrument 0627,0361,0869  
HTS  
0775  
Hitachi  
Hughes  
JVC  
0819  
0749  
0775  
Jerrold  
0627,0361  
0724,0722  
0724  
0869  
0701  
0724,0722  
0627,0361  
0566  
Magnavox  
Memorex  
Next Level  
Panasonic  
Philips  
Primestar  
RCA  
Sony  
0639  
Star Choice  
Toshiba  
Uniden  
Zenith  
0869  
0790  
0724,0722  
0856  
20  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 21  
USING THE SHIFT KEY  
The SHIFT key is designed to provide access to channel  
control capabilities of your TV (e.g.,Digits 0-9,Up/Down,  
Enter,and Last) andVideo On Demand (VOD) features of  
your cable converter.  
NOTE:Video On Demand is not available on all cable converters.  
To check for compatibility, please refer to the owners manual that  
came with your cable converter.When activated the VCR trans-  
port keys will serve as Video On Demand keys.  
To Activate TVs Channel Control Capabilities:  
1.  
2.  
On the Millennium 3,press SHIFT once.  
Press TV once.The LED will blink twice.  
To Reset Channel Control To Cable Converter:  
1.  
2.  
On the Millennium 3,press SHIFT once.  
Press any key once,excluding TV.  
To Activate Cables Video On Demand (Using  
The VCR Transport Keys):  
1.  
2.  
On the Millennium 3,press SHIFT once.  
Press PLAY once.The LED will blink twice.  
To Reset VCR Transport Keys for VCR Use:  
1.  
2.  
On the Millennium 3,press SHIFT once.  
Press and release CBL.  
21  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 22  
SEARCHING FOR YOUR CODE  
If your TV,VCR,or Cable Converter does not respond to  
the Millennium 3 after trying all of the codes listed for  
your brand,or if your brand is not listed at all,try search-  
ing for your code.  
For example,to search for a code for your TV:  
1.  
2.  
Turn on your TV.  
On the Millennium 3, press and hold SETUP  
until the LED blinks twice,then release SETUP.  
3.  
4.  
Enter 9 - 9 - 1.The LED will blink twice.  
Aim the remote control at the the TV and slowly  
alternate between pressing and TV.  
Stop when the TV turns off.  
NOTE: In the search mode, the Millennium 3 will  
send IR codes from its library to the selected compo-  
nent, starting with the most popular code first.  
5.  
6.  
Press SETUP once to lock in the code.  
To search for the codes of other components,  
repeat steps 1 through 5,but substitute the  
appropriate key (i.e.,VCR or CBL) for the (VCR  
or Cable) component you are searching for.  
22  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 23  
CHECKING THE CODES  
If you have set up the Millennium 3 using the Searching  
For Your Code procedure,you may need to find out which  
four-digit code is operating your equipment:  
For example,to find out which code is operating your TV:  
1.  
2.  
Turn on your TV.  
On the Millennium 3, press and hold SETUP  
until the LED blinks twice,then release SETUP.  
3.  
4.  
Enter 9 - 9 - 0.The LED will blink twice.  
To view the code for the first digit,press 1 once.  
Wait 3 seconds and count the number of LED  
blinks (e.g.,3 blinks = 3) and write down the  
number in the leftmost TV Code box below.  
NOTE: If a code digit is0”, the LED will not blink.  
5.  
6.  
Repeat step 4 three more times for remaining  
digits.Use 2 for the second digit,3 for the third  
digit,and 4 for the fourth digit.Finish writing  
down the code in the TV Code boxes below.  
To check for the codes of other components,  
repeat steps 1 through 5,but substitute the  
appropriate key (i.e.,VCR or CBL) for the (VCR  
or Cable) component you are checking.Write  
down the codes in the appropriate boxes below.  
TV Code  
VCR Code  
CABLE Code  
23  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 24  
PROGRAMMING THE OPTION KEY FOR A  
SPECIFIC CHANNEL OR KEY SEQUENCE  
The Millennium 3 includes one OPTION key that can be  
programmed to remember up to three of your favorite  
channel settings.Or you can set it to remember a  
sequence of key presses,such asAll On /All Off”, so you  
can turn on/off your components with a single key press.  
To program OPTION to remember channels:  
1.  
On the Millennium 3, press and hold SETUP  
until the LED blinks twice,then release SETUP.  
2.  
Enter 9 - 9 - 5.The LED will blink twice.  
3.  
4.  
Press OPTION once.  
Using the keypad,enter the channel number to  
be remembered (e.g.,3 - 9 for channel 39).  
NOTE: If you are programming a channel for a  
Digital Cable Converter, you need to enter all chan-  
nels in a 3-digit channel format. For example, if the  
desired channel is 39, then enter it as 0 - 3 - 9.  
5.  
6.  
Press and hold SETUP until the LED blinks  
twice,then release SETUP.  
To add another channel,repeat steps 1-5,sub-  
stituting the new channel to be added in step 3.  
NOTE: Programming more than three channels onto  
OPTION key will overwrite previous settings. To clear all  
channels in memory, performTo Clear The Option  
Keyon the next page.  
To program OPTION for all On/Off:  
1.  
On the Millennium 3, press and hold SETUP  
until the LED blinks twice,then release SETUP.  
2.  
Enter 9 - 9 - 5.The LED will blink twice.  
3.  
4.  
5.  
6.  
7.  
Press OPTION once.  
Press CBL.  
Press TV.  
Press VCR.  
Press and hold SETUP until the LED blinks  
twice,then release SETUP.  
24  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 25  
To clear the OPTION key:  
1.  
On the Millennium 3, press and hold SETUP  
until the LED blinks twice,then release SETUP.  
2.  
Enter 9 - 9 - 5.The LED will blink twice.  
3.  
4.  
Press OPTION once.  
Press and hold SETUP until the LED blinks  
twice,then release SETUP.  
5.  
The OPTION key is now clear and ready for  
reprogramming.  
25  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 26  
TROUBLESHOOTING  
PROBLEM: LED does not blink or blinks twice when you  
press a key.  
SOLUTION: Replace the batteries with two (2) new AA  
alkaline batteries (see page 7).  
PROBLEM: LED blinks when you press a key,but home  
entertainment component does not respond.  
SOLUTION: Make sure you are aiming the Millennium 3 at  
your home entertainment component and that  
you are within 15 feet of the component you are  
trying to control.  
PROBLEM: The Millennium 3 does not control home enter-  
tainment components or commands are not per-  
forming properly.  
SOLUTION: Try all listed codes for the component brand  
being set up. Make sure all components can be  
operated with an infrared remote control.  
PROBLEM: TV/VCR combo does not respond properly.  
SOLUTION: Use theVCR codes for your brand. Some combo  
units may require both a TV code and aVCR  
code for full operation (see page 16).  
PROBLEM: CH+ , CH– , and LAST do not work for your  
RCA TV.  
SOLUTION: Due to RCA design (1983-1987), only the original  
remote control will operate these functions.  
PROBLEM: Changing channels does not work properly.  
SOLUTION: If original remote control required pressing  
ENTER to change channels,press ENTER on the  
Millennium 3 after entering a channel number.  
PROBLEM: TriedSearch Methodand still could not find a  
working code.  
SOLUTION: Try the“Search Methodagain after clearing out  
the device key as follows: Press and hold ENTER  
until red light blinks twice,then release.Next  
enter 9 - 9 - 2.Then press and release the device  
key to be cleared twice.  
PROBLEM: Remote control does not turn on Sony or Sharp  
TV/VCR Combo.  
SOLUTION: For power on,these products require program-  
ming TV codes on the Millennium 3.For Sony,  
use TV code 0000 andVCR code 0032. For Sharp,  
use TV code 0093 andVCR code 0048.  
26  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 27  
ADDITIONAL INFORMATION  
The Millennium 3 does not have any user-serviceable  
parts.Opening the case,except for the battery cover,may  
cause permanent damage to your Millennium 3.  
For help via the Internet,visit us at:  
cable.rcinfo.com  
(do not type in http:// or www before the address)  
For help via e-mail,contact us at:  
CableHelp@ueic.com  
Copyright 1999 by Universal Electronics Inc.No part of  
this publication may be reproduced,transmitted,tran-  
scribed,stored in any retrieval system,or translated to  
any language,in any form or by any means,electronic,  
mechanical,magnetic,optical,manual,or otherwise,  
without the prior written permission of Universal Elec-  
tronics Inc.  
M3090  
5/99  
27  
 
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 28  
 

Topcom Games Toby User Manual
Topfield Satellite TV System TF3100FEI User Manual
Toshiba Cash Register MA 1060 User Manual
Toshiba DVD Player HD E1KE User Manual
TP Link Network Card TL WN851ND User Manual
Tyco Motorized Toy Car 37512 User Manual
Ultra Products Battery Charger ULT31792 User Manual
Vialta TV Receiver Beamer TV User Manual
ViewSonic Digital Photo Frame VFM1032 User Manual
Vornado Humidifier Ultrasonic Humidifiers User Manual