4-Port FireWire 400
PCI Host Card
User Manual
Model: UGT-FW050
All brand names and trademarks are properties of their respective owners.
w w w . v a n t e c u s a . c o m
Package Contents
z
z
z
1 x 4-Port FireWire 400 PCI Host Card Adapter
1 x User’s Manual
1 x 1394a DV Cable (6-pin to 4-pin)
Hardware Description
Before installing the 4-Port FireWire 400 PCI Host Card, please
see the photo below highlighting the available IEEE 1394aports
of the card.
Note: The Internal Port (P1)) shares with first
External Port (P2). DO NOT use P1 and P2 at the
UGT-FW050
Page 3
same time.
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector
with the selected PCI slot on the motherboard. Push the
board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
Windows® 2000/XP/Vista will automatically detect and install the
correct driver for the 4-Port FireWire 400 PCI Host Card. Make
sure that the driver has been installed correctly, right click My
Computer, then click Manage, click Device Manager. The
Device Manager window opens. Scroll to the IEEE 1394a Bus
host controller icon and click on the plus symbol, the VIA OHCI
Compliant IEEE 1394a Host Controller should be displayed.
UGT-FW050
Page 4
|