- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
Digital Photo Frame
VFD725w-50P
VFM735w-51P
Model No.: VS12403
Compliance Information
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection
systems according to local law.
VFD725w-50P/VFM735w-51P
ViewSonic
ii
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the
Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is
deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as
shown below:
Substance
Proposed Maximum Concentration
Actual Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of
RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic
devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and
as a cooper alloy containing up to 4% lead by weight.
VFD725w-50P/VFM735w-51P
ViewSonic
iii
Copyright Information
©
Copyright ViewSonic Corporation, 2009. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications
without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission
from ViewSonic Corporation.
For Your Records
Product Name:
VFD725w-50P/VFM735w-51P
ViewSonic Digital Photo Frame
Model Number:
Document Number:
Serial Number:
Purchase Date:
VS12403
VFD725w-50P_VFM735w-51P_UG_ENG Rev. 1C 04-16-09
________________________________________________
________________________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful
life. Your local waste disposal company may provide information about proper disposal.
VFD725w-50P/VFM735w-51P
ViewSonic
iv
TABLE OF CONTENTS
Introduction.............................................................................................................................................................................................1
Main Features .........................................................................................................................................................................................2
Overview..................................................................................................................................................................................................3
Getting Started........................................................................................................................................................................................4
Attaching the mount .............................................................................................................................................................................4
Connecting to the power ......................................................................................................................................................................5
Inserting Media.....................................................................................................................................................................................5
Copy files from computer .....................................................................................................................................................................7
Viewing Photos.......................................................................................................................................................................................8
Main screen..........................................................................................................................................................................................8
Viewing thumbnails ..............................................................................................................................................................................9
Browsing a single picture ...................................................................................................................................................................10
Playing a slideshow............................................................................................................................................................................10
Using OSD menu ...............................................................................................................................................................................11
Listening to Music (For VFM735w-51P only) .....................................................................................................................................12
Watching Videos (For VFM735w-51P only)........................................................................................................................................13
Managing Files......................................................................................................................................................................................14
Coping files.........................................................................................................................................................................................15
ViewSonic
VFD725w-50P/VFM735w-51P
Deleting files.......................................................................................................................................................................................15
Changing Frame Settings....................................................................................................................................................................16
Settings menus...................................................................................................................................................................................16
Setting auto power on/off ...................................................................................................................................................................18
Setting time ........................................................................................................................................................................................19
Setting alarm clock (For VFM735w-51P only)....................................................................................................................................19
Displaying Calendar (For VFM735w-51P only) ..................................................................................................................................20
Frequently Asked Questions...............................................................................................................................................................21
Specification .........................................................................................................................................................................................23
ViewSonic
VFD725w-50P/VFM735w-51P
Introduction
Thank you for purchasing this Digital Photo Frame.
This Digital Photo Frame is compatible with SD, MMC, MS and CF memory card formats, which enables you to view digital
photo directly from your camera’s memory card.
This manual contains important safety information and operation instructions, so please read all the instructions carefully
before using the Digital Photo Frame and keeps it for future reference.
We have done our best to produce a complete and accurate manual; however, we cannot ensure
there are no errors or omissions. We also have no responsibility for damages or loss of data caused
by improper operation.
The instruction manual is subject to change for improvement without notice.
Trademarks and trade names used in this user’s manual are owned by their respective companies
or organizations.
ViewSonic
VFD725w-50P/VFM735w-51P
1
Main Features
y
y
y
y
y
y
y
y
y
y
y
y
y
7 inch Digital TFT LCD: 800*480 15:9
Decorative appearance, good quality
Displays digital pictures (JPEG) without a computer
Automatic slide show with background music and multiple transition effects (For VFM735w-51P only)
Supports MP3 audio formats (For VFM735w-51P only)
Supports MPEG-1, MPEG-4 and M-JPEG video formats (For VFM735w-51P only)
Calendar display (For VFM735w-51P only)
Alarm setting (For VFM735w-51P only)
Auto power On/Off
Support earphone connection (For VFM735w-51P only)
Compatible with SD/MMC/MS, and CF memory cards
USB Host for connecting to the USB mass storage
USB2.0 high speed transmission
ViewSonic
VFD725w-50P/VFM735w-51P
2
Overview
Front View
Back and Side View
1.
2.
[X] Play/Pause; Confirm touch key
[M] Menu touch key; touch and hold to
open OSD menu
5.
[h]Right/Rotate/Adjust volume
10. USB HOST
touch key (For VFM735w-51P
only)
11. Headphones connection (For
VFM735w-51P only)
3.
4.
[2] Exit touch key
6.
7.
8.
9.
[i] Up/Previous touch key
[j] Down/Next touch key
SD/MMC/MS-card slot
CF-card slot
12. Mini-USB connection
13. 9V DC Input socket
14. Adjustable mounting
15. On/Off switch
[g] Left/Rotate/Adjust Volume touch
key (For VFM735w-51P only)
VFD725w-50P/VFM735w-51P
ViewSonic
3
Getting Started
Attaching the mount
1.
2.
3.
Place the frame on a flat surface with its back facing you.
Place the mount carefully in the slot on the back of the frame.
Turn the mount counter-clockwise by 45°until it locks. It will now be possible to
set the device in the landscape orientation.
4.
5.
Turn the mount counter-clockwise by 90° until it locks. It will now be possible to
set the device in the portrait orientation
After the mount has been attached, you can adjust the height of the mount by
pushing the mount gradually to the required alignment.
VFD725w-50P/VFM735w-51P
ViewSonic
4
Connecting to the power
1.
2.
Plug one end of the power adaptor into the DC socket in the Digital
Photo Frame, and the other into the wall outlet.
Switching the power to the ON marking position to turn on the Digital
Photo Frame.
Note:
y
To turn off the Digital Photo Frame completely, slide the power
switch from ON to OFF.
Inserting Media
In order to play images, videos or music (VFD725w-50P can only play images) from a card or a memory stick, insert the card
into its respective card slot on the Digital Photo Frame or use the USB port.
This Digital Photo Frame is compatible with the following memory cards:
• Secure Digital Card (SD) • Multimedia Card (MMC) • Memory Stick (MS) • Compact Flash card (CF)
You have three possibilities of inserting a memory card or attaching a memory stick:
ViewSonic
VFD725w-50P/VFM735w-51P
5
1.
2.
Insert the SD/MMC/MS card into the 3-in-1 card slot
with the metallic contacts facing towards the display.
Insert the CF card into the CF card slot with the
pinholes pointing towards the photo frame.
3.
Push a USB memory stick into the USB HOST slot.
Note:
y
y
Do not use any force while inserting a memory card or attaching a memory stick.
The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card
slot.
y
To remove the cards or the USB memory stick, pull it out gently.
ViewSonic
VFD725w-50P/VFM735w-51P
6
Copy files from computer
You can connect the digital photo frame to a computer to copy the files to the built-in memory (depends on the unit you
purchase) or the card inserted on the photo frame.
1.
2.
Make sure that your computer has been started before you start.
Connect the mini plug of the USB cable to the mini USB port on digital photo frame, and push the other end into a free
USB port on your computer.
3.
The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish
the installation. When it has finished, several “Removable Disk”, which indicate all drivers of the digital photo frame, will
be created in “My computer”. You can identify the drivers in the order: CF, SD/MMC, MS, Nand flash.
Drag and drop the files on your computer to the built-in memory or the card inserted on the photo frame.
To disconnect the USB cable from the computer, double click the Safely Remove Hardware icon on the task bar. Click
the USB Mass Storage Device, and then click OK.
4.
5.
Note:
y
y
y
y
y
y
Make sure no USB storage device is connected with the Digital Photo Frame before connecting to your computer.
The Digital Photo Frame must be plugged in and turned on before connecting to the computer.
When connecting with a computer, the USB HOST driver is not available.
Do not disconnect the USB cable or remove the card during files coping and transferring.
System support: Windows® 2000/ XP/ VistaTM.
Copy function does not work for all video files.
ViewSonic
VFD725w-50P/VFM735w-51P
7
Viewing Photos
Main screen
y
Once you switch on the digital photo frame, the main screen appears. When a memory device is inserted into the Digital
Photo Frame, the corresponding icon appears on the main screen.
y
In the main screen, you can select connected source to view pictures, change frame settings, or display the calendar.
Touch the [M] button to access the main screen. All connected source, setup and calendar icons are displayed.
1.
USB driver
SD/MMC
MS
Appears when you inserted a USB flash driver.
Appears when you insert a SD or MMC card.
Appears when you insert a MS card.
Appears when you insert a CF card.
CF
SETUP
CALENDAR
NAND
To customize the settings of Digital Photo Frame.
To display the Calendar on the screen.
Appears when you purchase a Frame with NAND flash
memory.
Note:
y
If no button is pressed for 6 seconds in the main menu after inserting a memory device, the slideshow will start
automatically.
y
If several memory devices connect to the frame simultaneously, the Digital Photo Frame will read the memory source
by the priority order as follows: USB, CF, SD/MMC/MS, NAND flash (only for model with internal memory).
ViewSonic
VFD725w-50P/VFM735w-51P
8
2.
Touch the [g] or [h] button to select a memory source, and then touch the
[X] button. The mode menu appears. Use the [g] or [h] button to select
Photo, Music, Movie or File.
Viewing thumbnails
In Photo mode, the pictures on the selected memory source can be displayed on
the screen as thumbnails. Up to 15 pictures are displayed at a time.
1.
2.
3.
Select a memory source (e.g. USB, SD/MMC) in the main screen and
touch the [X] button. The mode menu appears.
Touch the [g] or [h] button to select Photo, and then touch the [X] button.
The pictures are displayed on the screen as thumbnails.
To navigate through the thumbnails or move to the next or previous page of
thumbnails, touch the [i], [j], [g] or [h] button.
Note: Touch the [2] button from a slideshow or a single view to return to the thumbnails view.
ViewSonic
VFD725w-50P/VFM735w-51P
9
Browsing a single picture
You can select a single picture to display on the screen:
1.
Select a picture in the thumbnail view, and touch the [X] button. The selected picture is displayed on the full screen.
y
y
To view the previous or next photo, touch the [i] or [j] button.
To rotate a picture, touch the [g] or [h] button. There will pop out a window on the screen:
2.
3.
To return to the thumbnail view, touch the [2] button.
To start slide show from the current picture, touch the [X] button.
Playing a slideshow
While browsing a single picture, touch the [X] button to start slide show from the current picture.
y
To pause the slideshow and view a single picture, touch the [X] button. To resume the slideshow, touch the [X]
button again.
y
y
Touch the [2] button to exit the slideshow and view the pictures in thumbnail.
Touch the [M] button to exit the slideshow and return to the main screen.
ViewSonic
VFD725w-50P/VFM735w-51P
10
Using OSD menu
You also can use the OSD menu to manually view the photos one by one.
1.
Touch and hold the [M] button during viewing the picture or slideshow. The OSD menu appears on the screen and
slideshow pauses.
2.
Touch the [g] or [h] button to navigate between the icons on the OSD menu.
y
To start or resume slide show from the current picture, highlight X and touch the [X] button. The X icon is
changed toꢀicon.
y
y
y
y
To skip to previous picture, highlight
To skip to next picture, highlight
and touch the [X] button.
and touch the [X] button.
To stop or start background music playback, highlight
and touch the [X] button. (For VFM735w-51P only)
To start slide show with background music from the first picture, highlight
VFM735w-51P only)
and touch the [X] button. (For
y
To zoom in the picture, highlight
and touch the [X] button repeatedly to magnify pictures in the following
sequence: X2, X4, X8, X16. When a picture is magnified, touch the [i], [j], [g] or [h] button to view the other
part of the picture.
ViewSonic
VFD725w-50P/VFM735w-51P
11
Listening to Music (For VFM735w-51P only)
If there are MP3/WMA files on the memory device, you can play them on the Digital Photo Frame.
1.
Select a memory source (e.g. USB, SD/MMC) in the main screen and
touch the [X] button. The mode menu appears.
2.
Touch the [g] or [h] button to select Music, and touch the [X] button. The
music list with seven titles and playback interface appear. And there will
pop out a window on the screen:
3.
Use the [i] or [j] button to select the desired track and touch the [X]
button to play.
y
To pause playback, touch the [X] button. To resume playback,
touch the [X] button again.
y
y
To increase or decrease the volume, touch the [g] or [h] button.
To fast search forward or backward within a track, touch and hold
[g] or [h] button. Each time the button is pressed, the speed of
search changes accordingly. Touch the [X] button to resume the
playback from the searched point
y
To stop playback, touch the [2] button. Touch it again to return to
the mode menu.
VFD725w-50P/VFM735w-51P
ViewSonic
12
Watching Videos (For VFM735w-51P only)
You can watch the videos on the Digital Photo Frame. It supports MPEG-1, MPEG-2, MPEG-4 and M-JPEG formats used by
most digital cameras.
1.
2.
Select a memory source (e.g. USB, SD/MMC) in the main screen and touch the [X] button. The mode menu appears.
Touch the [g] or [h] button to select Movie, and touch the [X] button. The video list with a thumbnail video window
appears.
3.
4.
Touch the [i] or [j] button to select a video file. The corresponding video starts playback in thumbnail view.
Touch the [X] button to watch the video in full screen.
y
y
y
y
To pause playback, touch the [X] button. To resume playback, touch the [X] button again.
To increase or decrease the volume, touch the [g] or [h] button.
To skip to previous or next video, touch the [i] or [j] button.
To fast search forward or backward within a track, touch and hold [g] or [h] button. Each time the button is
pressed, the speed of search changes accordingly. Touch the [X] button to resume the playback from the
searched point.
y
To stop playback and return to the video list menu, touch the [2] button.
ViewSonic
VFD725w-50P/VFM735w-51P
13
Managing Files
In the File mode, you can view all playable files and folders on the memory source. You also can copy files from a memory
device to another memory device or delete the files.
1.
2.
3.
Select a memory source (e.g. USB, SD/MMC) in the main screen and
touch the [X] button. The mode menu appears.
Touch the [g] or [h] button to select File, and touch the [X] button. The file
list appears.
Use the [i] or [j] button to navigate between files and folders.
When a file is highlighted, the detailed information of file is displayed on
the right of the screen.
y
To open a folder, highlight it and touch the [X] or [h] button. To
return to superior directory, touch the [g] button.
To play a file, highlight it and touch the [X] button. To return to file
list, touch the [2] button.
y
VFD725w-50P/VFM735w-51P
ViewSonic
14
Coping files
1.
Highlight a file using the [i] or [j] button and touch the [h] button. A
check mark is displayed next to the file.
;
To check more files, repeat above step.
2.
3.
4.
5.
Touch and hold the [M] button. A menu with Copy and Delete options
displays on the right screen.
Use the [i] or [j] button to select Copy and touch the [X] button. The
other available memory source is displayed.
Use the [i] or [j] button to select a memory device and touch the [h]
button to select the destined directory.
Touch the [X] button to start coping files.
Note: If your destination device doesn’t appear in the list, the memory device should be write-protected. Please unlock and
try again the operation.
Deleting files
1.
2.
Use the [i] or [j] button to select Delete in Copy and Delete menu, and then touch the [X] button.
Use the [g] or [h] button to select “;” or “:” to delete the file or exit without deleting.
ViewSonic
VFD725w-50P/VFM735w-51P
15
Changing Frame Settings
The system settings let you customize and configure your Digital Photo Frame
1.
Select the SETUP icon in the main screen and touch the [X] button.
The Setup Menu and software version appear on the screen.
To select a setting option, touch the [i] or [j] button.
To change the value, touch the [g] or [h] button and then touch the [X]
button to confirm.
2.
3.
4.
Touch the [2] button to exit.
Settings menus
Setting options
Description
Language
Set up the language of the OSD menu.
Set up the interval time for slideshow.
Slideshow time
The available options include: 3s, 5s, 15s, 1 min, 15mins, 1 hour.
Set up the style of transition.
Transition effect
The available options include: Random, Fading, Off, Bottom_To_Top, Top_To_Bottom,
Left_To_Right, Right_To_Left, Door_Close, Door_Open, Hori_Cross, Verti_Cross.
ViewSonic
VFD725w-50P/VFM735w-51P
16
Set the repetition mode for music playback.
Repeat one: Play the selected music repeatedly.
Music Repeat Mode
Movie Repeat Mode
Repeat all: Play all music files on the selected memory source repeatedly.
Repeat off: Play all music files on the selected memory source once. (For VFM735w-51P only)
Set the repetition mode for movie playback.
Repeat one: Play the selected movie repeatedly.
Repeat all: Play all movie files on the selected memory source repeatedly.
Repeat off: Play all movie files on the selected memory source once. (For VFM735w-51P only)
Set the screen display mode.
Display Mode
The available options include: Fit Screen, Full Screen
Set the backlight exiting time for touch keys.
The available options include: 5s, 10s, 20s
Key-light Timeout
Set mode for automatic slideshow.
Autorun
The available options include: Only Photo, Off, Movie, Music, Music+Photo. (For
VFM735w-51P only)
Adjust the brightness of TFT screen.
TFT Brightness
The available options include: -3, -2, -1, 0, 1, 2, 3.
Adjust the contrast of TFT screen.
TFT Contrast
The available options include: -3, -2, -1, 0, 1, 2, 3.
Adjust the saturation of TFT screen.
TFT Saturation
ViewSonic
VFD725w-50P/VFM735w-51P
17
The available options include: -3, -2, -1, 0, 1, 2, 3.
AUTO Power On
AUTO Power Off
Time
Set the Digital Photo Frame to turn on at the specified time everyday or once.
Set the Digital Photo Frame to turn off at the specified time everyday or once.
Set calendar to the current date and time. (For VFM735w-51P only)
Set the alarm time, ring tone and schedule. (For VFM735w-51P only)
Reset all settings to the default setting.
Alarm
Default settings
Setting auto power on/off
You can enable the Digital Photo Frame to turn on or off automatically at a specified time.
1.
2.
3.
Select the SETUP icon in the main screen and touch the [X] button. The Setup Menu appears on the screen.
Touch the [i] or [j] button to select Auto Power On or Auto Power Off.
Touch the [g] or [h] button to highlight next or previous setting (hour, minutes, schedule). And touch the [i] or [j]
button to adjust the time or select the schedule as below.
y
y
y
Off: Disables the auto power on or off function.
Every: The Digital Photo Frame will turn on or off at the preset time everyday.
Once: The Digital Photo Frame only turns on or off at the preset time once.
4.
Touch the [X] button to confirm.
Note: The current time must be set correctly before setting up this feature.
VFD725w-50P/VFM735w-51P
ViewSonic
18
Setting time
You can set the system time to the current date and time so that the Calendar display is correct.
1.
2.
3.
Select the SETUP icon in the main screen and touch the [X] button. The Setup Menu appears on the screen.
Touch the [i] or [j] button to select Time.
Touch the [g] or [h] button to highlight next or previous setting (year, month, day, hour, minutes). And touch the [i] or
[j] button to adjust the time.
4.
Touch the [X] button to confirm.
Setting alarm clock (For VFM735w-51P only)
The Digital Photo Frame can also work as an alarm.
1.
2.
3.
Select the SETUP icon in the main screen and touch the [X] button. The Setup Menu appears on the screen.
Touch the [i] or [j] button to select Alarm.
Touch the [g] or [h] button to highlight next or previous setting (hour, minutes, ring tone, schedule). And touch the [i]
or [j] button to adjust the time, select the ring or select the schedule as below.
y
y
y
Off: Disables the alarm clock function.
Every: The alarm clock will start to ring at the preset time everyday.
Once: The alarm clock will start to ring at the preset time once.
4.
Touch the [X] button to confirm.
VFD725w-50P/VFM735w-51P
ViewSonic
19
Displaying Calendar (For VFM735w-51P only)
You can switch your Digital Photo Frame to Calendar mode that the current date and time is displayed on the screen with a
slide show in thumbnail.
1.
Select the Calendar icon in the main screen and touch the [X] button.
The Calendar is displayed on the screen and all photos in all the memory
source start slide show in thumbnail.
2.
To exit the Calendar mode, touch the [2] button.
Note:
y
The Digital Photo Frame will switch to Calendar mode automatically if it is
not used for 5 minutes (except for Pause mode).
y
The date and time can be adjusted in the SETUP mode.
VFD725w-50P/VFM735w-51P
ViewSonic
20
Frequently Asked Questions
1. Why cannot the Digital Photo Frame display some files from my Flash card or USB device?
•
Some unpopular memory cards are not compatible with the device. Use a card which matches with the Digital Photo
Frame.
•
The file formats on your card or USB device might not be supported (only JPEG pictures are accessible). Provide files
with the supported JPEG.
2. There is a memory card inserted in the Digital Photo Frame, but the device is not able to read the card. What
can I do?
•
•
•
First, make sure that you are using a memory card type that is supported by the Digital Photo Frame.
Secondly, make sure that the memory card is inserted correct.
Thirdly, check if the USB device is inserted into the unit. This Digital Photo Frame always reads the files in the USB
device if USB device and a card are inserted simultaneously.
•
The file formats on your card might not be supported (only JPEG pictures are accessible). Provide files with the
supported JPEG.
Note: Some digital cameras save images into non-standard formats. Please refer to the operating manual of your camera for
specifics.
ViewSonic
VFD725w-50P/VFM735w-51P
21
3. Why do some pictures load faster than others?
Higher resolution pictures load slower. Use pictures with lower resolution to speed up the loading time.
•
Note: The Digital Photo Frame supports up to 8000*8000 pixels picture display.
4. Why does the screen not show anything?
•
The device might not have been turned ON or the adapter is not well connected.
5. Can I rotate a picture on the screen?
YES. Use the [g] or [h] button to rotate a picture.
•
Note: The rotated picture will return to its original orientation after you power off the Digital Photo Frame.
6. Why doesn’t my Digital Photo Frame go into Auto-off or Auto-on status after I set it?
•
Make sure you set current time correctly. The Digital Photo Frame will automatically turn on or turn off its display exactly
at the Auto-on or Auto-off time. If the time has already passed for the day, it will start entering Auto-on or Auto-off status
at the specified time from the next day.
7. What is the best picture resolution displayed on the screen?
•
The best resolution is 800*480 and the max picture resolution of this Digital Photo Frame is 8000*8000 pixels.
ViewSonic
VFD725w-50P/VFM735w-51P
22
Specification
Digital TFT LCD
Panel size: 7 inches
Screen aspect ratio: 15:9
Resolution: 800*480 pixels
DC in, Stereo speaker
Display
I/O
Input: 100~240V AC, 50~60Hz
Output: DC 9V 1.5A
Power adaptor
USB Host 2.0 & USB device 2.0
Supports USB flash media
USB port
SD™ (Secure Digital Card), MMC™ (MultiMedia Card), MS™ (Memory Stick),
CF™ (Compact Flash)
Supported
devices
peripheral
Supported photo format
Supported audio format
JPEG, Maximum resolution: 8000*8000 pixels
MP3: Bit rate 32~320Kbps (CBR, VBR) (For VFM735w-51P only)
MPEG-1(MP@ML), MPEG-4(ASP, Xvid Compliant), M-JPEG(up to VGA, 30fps) (For
VFM735w-51P only)
Supported video format
Operating temperature
Dimension
-10
℃
~ 40℃
210*160*28.6mm
453.2g
Weight
VFD725w-50P/VFM735w-51P
ViewSonic
23
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/Region
Web Site
Telephone
Austria
0150 159 6005
Belgium
02 256 6642
Bulgaria
Czech Republic
Denmark
Estonia
+359 2 817 3650
+420 22012 1432
35 25 65 12
+372 651 9972
09 2311 3413
03 8717 1616
0696 630 8051
+30 210 2409 150
+36 1814 8080
01 411 8936
Finland
France
Germany
Greece
Hungary
Republic of Ireland
Italy
02 4527 9033
+37 1706 5100
Latvia
VFD725w-50P/VFM735w-51P
ViewSonic
Lithuania
Luxembourg
The Netherlands
Macedonia
Norway
+37 037 466191
40 6661 5618
053 484 9308
00 389 246 1889
+22 57 77 38
Poland
+48 61 879 8993
21359 1423
Portugal
Slovak Republic
Slovenia
421 244 648 151
+ 386 839 4617
095 7258 106
913 496 534
Russia
Spain
Sweden
08 5792 9045
+41 52 624 0128
+380 44 239 99 99
0207 949 0307
0800-061-198
65-64616044
Switzerland
Ukraine
United Kingdom
Taiwan
Singapore
VFD725w-50P/VFM735w-51P
ViewSonic
Limited Warranty
VIEWSONIC Digital Photo Frame
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in
material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may
include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
2.
Any product on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
a.
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the
product.
b.
c.
d.
e.
f.
Repair or attempted repair by anyone not authorized by ViewSonic.
Causes external to the product, such as electric power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
Any other cause which does not relate to a product defect.
3.
Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.
How to get service:
1.
For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer Support page). You will need to provide your
product’s serial number.
2.
To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e)
the serial number of the product.
3.
4.
Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
ViewSonic
VFD725w-50P/VFM735w-51P
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a
particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1.
Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of
business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Any other damages, whether incidental, consequential or otherwise.
2.
3.
Any claim against the customer by any other party.
4.3: ViewSonic DPF Warranty
DPF_LW01 Rev. 1A 06-20-08
VFD725w-50P/VFM735w-51P
ViewSonic
|