VENTILATION
Professional Built-In 18”H.
Wall Hood/Chimney Wall Hood
Standard Features & Accessories
All models include
• Must also purchase interior or exterior
• Heat lamp(s) standard—250-watt
bulb(s) not included
WALL HOODS, 27”D.
ventilator kit, sold separately (see
Installation Notes & Accessories for
recommended Viking ventilator
products)
• Heavy-duty construction; Professional-
type size, design, and styling
o Virtually seamless stainless steel
design with no visible screws
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Easy cleanup
o Commercial-type baffle filter system
efficiently removes grease and
heated vapors from the air;
especially designed for use with
commercial-type products
• See Dimensions & Specifications
table for number of filters per
model
• VWH3678—36”W.
• VWH4878—48”W.
• VWH6078—60”W.
CHIMNEY WALL HOODS, 24”D.**
• VCWH3048—30”W.
• VCWH3648—36”W.
• VCWH4248—42”W.
• VCWH4848—48”W.
• VCWH5448—54”W.
• VCWH6048—60”W.
• VCWH6648—66”W.
o See Dimensions & Specifications
table for number of lamps per model
o High-shelf (cooking product
accessory) or warming shelf panel
(see Installation Notes &
Accessories) should be installed for
use with heat lamp
• 50-watt halogen lights with dimmer
control
o Power switch and dimmer control
are separate, allowing you to leave
dimmer at favorite position
o See Dimensions & Specifications
table for number of lights per model
Extra feature on chimney wall
hoods
• Adjustable duct cover (for 8’ – 9’
ceilings) is standard
Model numbers*
WALL HOODS, 24”D.**
*A 1,200 CFM interior or 1,500 CFM
exterior (if applicable) ventilator should
be used when installed over
ranges/rangetops with gas grill.
**Tests show 24”D. hoods perform
properly over 27”D. ranges.
o Design of low-profile filter system
means less interior hood space to
be cleaned
• VWH2448—24”W.
• VWH3048—30”W.
o Canopy interior is completely lined
in stainless steel for increased
rigidity, seamless appearance, and
easy cleaning
• VWH3648—36”W.
• VWH4248—42”W.
• VWH4848—48”W.
• VWH5448—54”W.
o Separate removable trough catches
liquefied grease
• VWH6048—60”W.
• VWH6648—66”W.
Model Options
VWH Professional
Wall Hood
VCWH Professional
Chimney Wall Hood
FINISH DETAILS
• Stainless Steel (SS), Black (BK), White
(WH), Metallic Silver (MS), Graphite Gray
(GG), Stone Gray (SG), Taupe (TP), Biscuit
(BT), Cotton White (CW), Oyster Gray
(OG), Golden Mist (GM), Lemonade (LE),
Sage (SA), Mint Julep (MJ), Sea Glass (SE),
Iridescent Blue (IB), Viking Blue (VB),
Pumpkin (PM), Racing Red (RR), Apple
Red (AR), Burgundy (BU), Plum (PL),
Chocolate (CH), and Cobalt Blue (CB).
• Finish designates front and sides.
o Brass Trim Option (BR)—nameplate,
rail, supports/brackets, and hooks
(included). Brass components have a
durable protective coating for
• Accessory Rail Option—Front of hood.
(Must be ordered factory installed)
o Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
and hooks (included).
maintenance-free normal use.
ORDERING INSTRUCTIONS
First specify model number, followed by color code (VWH2448SS). If ordering optional decorative rail, specify code at end
(VWH2448SSCR).
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
VENTILATION
Professional Built-In 18”H.
Wall Hood/Chimney Wall Hood
Please see
Dimensions & Specifications
✪
Installation Notes &
Accessories for
important information,
including ventilator
kits, duct covers,
backsplashes, and
warming shelf
PRODUCT DIMENSIONS
panels.
VCWH Professional
Chimney Wall Hood
B
C
12”
(30.5 cm)
to
24”
(61.0 cm)
6 ”
(15.2 cm)
18”
(45.7 cm)
A
24”
1.0 cm)
(6
CHIMNEY WALL HOOD
Model
Hood
Width (A)
Duct Cover
Width (B) Depth (C)
Lights
Filters
Heat
Lamps
Approx.
Ship. wt.
Depth
Height
VCWH3048 29-7/8” (75.9 cm)
VCWH3648 35-7/8” (91.1 cm)
VCWH4248 41-7/8” (106.4 cm)
VCWH4848 47-7/8” (121.6 cm)
VCWH5448 53-7/8” (136.8 cm)
VCWH6048 59-7/8” (152.1 cm)
VCWH6648 65-7/8” (167.3 cm)
24” (61.0 cm) 12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm)—
24” (61.0 cm)
2
2
2
3
3
4
4
2
2
2
2
3
4
4
1
1
1
2
2
2
2
120 lbs.
(54.5 kg)
127 lbs.
(57.7 kg)
138 lbs.
(62.7 kg)
145 lbs.
(65.8 kg)
153 lbs.
(69.5 kg)
160 lbs.
(72.6 kg)
167 lbs.
(75.8 kg)
24” (61.0 cm) 12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm)—
24” (61.0 cm)
24” (61.0 cm) 12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm)—
24” (61.0 cm)
24” (61.0 cm) 18” (45.7 cm) 18” (45.7 cm) 12” (30.5 cm)—
24” (61.0 cm)
24” (61.0 cm) 18” (45.7 cm) 18” (45.7 cm) 12” (30.5 cm)—
24” (61.0 cm)
24” (61.0 cm) 24” (61.0 cm) 24” (61.0 cm) 12” (30.5 cm)—
24” (61.0 cm)
24” (61.0 cm) 24” (61.0 cm) 24” (61.0 cm) 12” (30.5 cm)—
24” (61.0 cm)
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
VENTILATION
Professional Built-In 18”H.
Wall Hood/Chimney Wall Hood
Dimensions & Specifications
CLEARANCE DIMENSIONS
66”min.
(16
7.6 cm)
30”min.
to
72”m
(76.2 c
(182.9 cm)
ax.
m)
to
36”max.
(91.4 cm)
36”
(91.4 cm)
WALL HOOD
66”min.
(16
7.6 cm)
30”min.
to
72”max.
(76.2 c
(182.9 cm)
m)
to
36”max.
(91.4 c
m)
36”
cm)
(91.4
CHIMNEY WALL HOOD
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
VENTILATION
Professional Built-In 18”H.
Wall Hood/Chimney Wall Hood
Installation Requirements
Wall Hood
Chimney Wall Hood
UTILITY REQUIREMENTS
Proper installation/ducting is
extremely important to ensure
maximum performance. Use a qualified
and trained installer.
o Duct run length is for
general reference only;
always use a qualified and
trained installer.
GAS
Not applicable
o Straight runs and gradual
turns are best; for example,
each 90° elbow is equivalent
to 5’ – 10’ (1.52 –
3.05 cm) of straight run.
• 7” round duct for 300 – 600
CFM; 10” for 900 – 1500 CFM
o Never use flexible duct; it
creates back pressure/air
turbulence and greatly
reduces performance.
DUCTING
ELECTRICAL
• Hardwire direct with two-wire
with ground
• 120 VAC/60 Hz
• Max. amp usage (rating
includes rec. ventilator kit
rating)
• Check with a qualified and
trained installer or local codes
for makeup air requirements,
if any.
• Max. duct run
o For 300 – 1,200 CFM—50’
(15.2 m)
o For 1,500 CFM—75’
(22.9 m)
PLUMBING
Not applicable
Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be
greatly overstated.
Model
Ventilator Kits
Duct Size
Max. Amps
Interior
Interior
Exterior
Interior
Exterior
Exterior
8.7/6.1
8.7/6.1
8.7/6.1
8.7/6.1
8.4/9.1
8.4/9.1
8.8/9.5
8.8./9.5
8.7/6.1
8.4/9.1
8.8/9.5
8.7/6.0
8.7/6.0
8.7/6.1
8.5/9.2
8.5/9.2
8.9/9.7
8.9/9.7
VWH2448
VWH3048
VWH3648
VWH4248
VWH4848
VWH5448
VWH6048
VWH6648
VWH3678
VWH4878
VWH6078
VCWH3048
VCWH3648
VCWH4248
VCWH4848
VCWH5448
VCWH6048
VCWH6648
VIV300/600
VIV300/600/1200*
VIV300/600/1200*
VIV600/1200*
VIV1200*
VEV900/1200*
VEV900/1200*
VEV900/1200*
VEV900/1200*
VEV1200/1500**
VEV1200/1500**
VEV1200/1500**
VEV1200/1500**
VEV900/1200*
VEV1200/1500**
VEV1200/1500**
DEV900/1200*
DEV900/1200*
DEV900/1200*
DEV1200/1500*
DEV1200/1500
DEV1200/1500
DEV1200/1500
7” (17.8 cm)
7”(17.8 cm)/10” (25.4 cm)
7”(17.8 cm)/10” (25.4 cm)
7”(17.8 cm)/10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
5.0/6.2
5.0/6.2/8.7
5.0/6.2/8.7
6.2/8.7
11.1
VIV1200*
VIV1200*
VIV1200*
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
11.1
11.5
11.5
VIV300/600/1200*
VIV1200*
7”(17.8 cm)/10” (25.4 cm)
10” (25.4 cm)
5.0/6.2/8.7
11.1
VIV1200*
10” (25.4 cm)
7” (17.8 cm)
7” (17.8 cm)
7” (17.8 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
11.5
DIV300/600
DIV300/600*
DIV600*
DIV1200*
DIV1200*
3.9/6.0
3.9/6.0
6.0
11.5
11.5
DIV1200*
DIV1200*
11.9
11.9
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs.
Note: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2-wire with ground. An interior-
or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
VENTILATION
Professional Built-In 18”H.
Wall Hood/Chimney Wall Hood
Installation Notes & Accessories
✪
Recommended Ventilator Kits
• See Installation Requirements table for recommendations for each hood model
• One ventilator, one duct run for any size hood/ventilator
• Variable speed controls for custom venting—separate on/off switch allows you to leave ventilator at favorite/most-used
setting
• Choose from interior- or exterior-power ventilator kits
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
Kit model
VIV300
Description
Hood models
Approx. ship wt. lbs. (kg)
300 CFM interior-power
600 CFM interior-power
1,200 CFM interior-power
VWH2448/3048/3648/3678
VWH2448/3048/3648/3678/4248
VWH3048/3648/3678/4248/4848/
4878/5448/6048/6078/6648
VWH2448/3048/3648/3678/4248
VWH2448/3048/3648/3678/4248/
4848/4878/5448/6048/6078/6648
VWH4848/4878/5448/6048/6078/6648
VCWH3048/3648
27 (12.2)
27 (12.2)
43 (19.4)
VIV600
VIV1200
VEV900
900 CFM exterior-power
1,200 CFM exterior-power
39 (17.6)
53 (23.9)
VEV1200
VEV1500
DIV300
1,500 CFM exterior-power
300 CFM interior-power
600 CFM interior-power
1200 CFM interior-power
900 CFM exterior-power
1,200 CFM exterior-power
1,500 CFM exterior-power
47 (21.3)
15 (6.8)
DIV600
VCWH3048/3648/4248
27 (12.2)
43 (19.4)
39 (17.6)
53 (23.9)
47 (21.3)
DIV1200
DEV900
DEV1200
DEV1500
VCWH4848/5448/6048/6648
VCWH3048/3648/4248
VCWH3048/3648/4248/4848/5448/6048/6648
VCWH4848/5448/6048/6648
Duct Covers
• Specify finish code following accessory model number (for example, DCW24-SS)
o Professional models
• For VWH/VCWH hoods
• 12”D.
• Extends height of hood by 12”—conceals duct
• Available in Stainless Steel (SS), Black (BK), White (WH), Almond (AL), Biscuit (BT), Stone Gray (SG), Graphite Gray
(GG), Burgundy (BU), Lemonade (LE), Mint Julep (MJ), Forest Green (FG), Viking Blue (VB), Cobalt Blue (CB), and
Eggplant (EP)
Model
DCW24
DCW30
DCW36
DCW42
DCW48
DCW54
DCW60
DCW66
Description
Approx. ship wt. lbs. (kg)
9 (4.0)
Professional 24”W. duct cover
Professional 30”W. duct cover
Professional 36”W. duct cover
Professional 42”W. duct cover
Professional 48”W. duct cover
Professional 54”W. duct cover
Professional 60”W. duct cover
Professional 66”W. duct cover
10 (4.5)
11 (5.0)
13 (5.9)
14 (6.3)
23 (10.4)
24 (10.8)
26 (11.7)
Duct Cover Extensions
• For use with Professional chimney wall hoods (VCWH)
• Extends height of hood by up to 12” (for 10’ ceilings)
• Replaces adjustable duct cover supplied with hood
• Specify finish code following accessory model number (for example, DCCE1210-SS)
o Available in Stainless Steel (SS), Black (BK), White (WH), Almond (AL), Biscuit (BT), Stone Gray (SG), Graphite Gray (GG),
Burgundy (BU), Lemonade (LE), Mint Julep (MJ), Forest Green (FG), Viking Blue (VB), Cobalt Blue (CB), and Eggplant
(EP)
Model
Description
Approx. ship wt. lbs. (kg)
DCCE1210
DCCE1810
DCCE2410
Duct cover extension (for 30”W., 36”W., & 42”W. hoods)
Duct cover extension (for 48”W. & 54”W. hoods)
Duct cover extension (for 60”W. & 66”W. hoods)
6 (2.7)
8 (3.6)
11 (4.9)
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
VENTILATION
Professional Built-In 18”H.
Wall Hood/Chimney Wall Hood
Installation Notes & Accessories
✪
Backsplashes
• Stainless Steel (SS)
• 30”H.
• For both VWH & VCWH hoods
• Backsplashes protect the wall space below hood
• Create a continuous finish between cooking surface and hood
• Low maintenance, easy to clean
• Hemmed edges with screw holes
• Kit includes backsplash and fastening screws
Model
BKS24
BKS30
BKS36
BKS42
BKS48
BKS54
BKS60
BKS66
Description
Approx. ship wt. lbs. (kg)
5 (2.3)
24”W. backsplash
30”W. backsplash
36”W. backsplash
42”W. backsplash
48”W. backsplash
54”W. backsplash
60”W. backsplash
66”W. backsplash
7 (3.2)
9 (4.1)
12 (5.4)
14 (6.3)
17 (7.7)
20 (9.0)
23 (10.4)
Warming Shelf Panels
• Stainless Steel (SS)
• 12”D./12”H.
• For both VWH & DCH hoods
• Shelf panels hold cookware and condiments
• Fold up/down, heavy-duty warming shelves (non-removable), factory installed on stainless steel backsplash
• 15-7/8”W. X 10-1/8”D.
• Kit includes shelf (or shelves) and fastening screws.
Model
WGP24
WGP30
WGP36
WGP42
WGP48
WGP54
WGP60
WGP66
Description
Approx. ship wt. lbs. (kg)
6 (2.7)
24”W. warming shelf panels (one shelf)
30”W. warming shelf panels (one shelf)
36”W. warming shelf panels (two shelves)
42”W. warming shelf panels (two shelves)
48”W. warming shelf panels (two shelves)
54”W. warming shelf panels (two shelves)
60”W. warming shelf panels (three shelves)
66”W. warming shelf panels (three shelves)
9 (4.1)
12 (5.4)
14 (6.3)
16 (7.2)
20 (9.0)
23 (10.4)
26 (11.7)
Compliance Information
WARRANTY SUMMARY*
• One-year full warranty—complete product
• Five-year limited warranty—all ventilator motors
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.
Warranty valid on Viking products shipped within the United States and Canada.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
|