P-60/65/70
QUICK START GUIDE
Prep
ip:
2
1
Remove the reservoir
from base and fill with
lukewarm water.
Fill
No
Gap
Press tip firmly into
handle. When tip is
Replace
Insert
properly inserted there
should be no gap between
control knob and tip. To
remove tip, simultaneously
hold control knob down
and lift tip up.
Replace the
reservoir onto the base,
PRESSING DOWN FIRMLY
to ensure full seating.
Prime Unit (First Time Use Only):
Adjust Pressure and Pause Control:
4
3
You can temporarily stop
Prior to Very First Use of Unit, Prime Unit:
Set pressure control slide switch on handle
tohigh,point the handle and tip into sink.
Turn unitONuntil water flows from the handle,
turn unit OFF.
For first time
users, adjust
water flow by pressing
the pause button on the
handle.
pressure control
to lowest position.
Gradually increase
pressure as you
prefer.
PAUSE
High
Low
continued
on back
|