Item #754-470
Model #CF544H-PEH
USE AND CARE GUIDE
CLARKSTON 44 INCH CEILING FAN
Questions, problems, missing parts?
Before returning to the store, call Customer Service
1-877-527-0313
HOMEDEPOT.COM
Warranty
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period
of 15 years after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the
date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installa-
tion or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover
any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful
life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim
any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by
law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty.
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall
not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as
may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above
exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty
must be paid by the customer.
Contact the Customer Service Team at 1-877-527-0313 or visit WWW.HOMEDEPOT.COM.
Pre-Installation
SPECIFICATIONS
Fan size
Speed
Low
Volts
120
Amps
0.22
0.31
0.40
Watts
14.7
29.2
48.4
RPM
95
CFM
1711
2549
3241
N.W.
G.W.
C.F.
7.15 kgs
8.60 kgs
44 in.
135
182
1.39 ft.
Medium
High
(15.73 lbs) (18.92 lbs)
NOTE: These are approximate measures. They do not
include amps and wattage used by the light kit.
TOOLS REQUIRED
Phillips
screwdriver
Flat blade
screwdriver
Step
ladder
Wire
stripper
Electrical
Tape
3
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware shown to actual size unless noted
otherwise in the table below.
AA
BB
EE
CC
DD
GG
FF
Part
AA
BB
CC
DD
EE
Description
Quantity
Blade screw
16
16
11
3
Fiber washer (not to scale)
Blade bracket screw (10 pieces preassembled)
Plastic wire nut
Pull chain fob
2
FF
Balancing kit (not to scale)
60W A15C bulb (not to scale)
1
GG
3
4
Pre-Installation (continued)
PACKAGE CONTENTS
C
D
A
E
G
B
F
Part
A
Description
Quantity
Part
E
Description
Quantity
Blade
5
5
1
1
Fan housing
1
1
3
B
Blade bracket
Mounting bracket
Fan motor assembly
Light kit assembly
Glass shade
F
C
G
D
5
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation
MOUNTING OPTIONS
WARNING: To reduce the risk of fire, electric shock, or
2
personal injury, mount the fan to an outlet box marked
acceptable for fan support using the screws provided with the
outlet box. An outlet box commonly used for the support of
lighting fixtures may not be acceptable for fan support and
may need to be replaced. If in doubt, consult a qualified
electrician.
1
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
To hang your fan where there is an existing fixture but no ceiling
joist, you may need an installation hanger bar (2) (not included)
as shown above.
□
□
Disconnect the power by removing the fuses or turning off
the circuit breakers.
Secure the outlet box (1) (not included) directly to the
building structure. Use appropriate fasteners and materials
(not included). The outlet box and its bracing must be able
to fully support the weight of the moving fan (at least 35
lbs.). Do not use a plastic outlet box.
The illustrations below show two different ways to mount the
outlet box (not included).
1
1
6
Assembly — Hanging the Fan
Hanging the fan to the
mounting bracket
Installing the mounting bracket to
the electrical box
2
1
□
Lift the fan into position by hanging the mounting plate (H)
portion of the fan motor assembly (D) onto the hook from
the ceiling mounting bracket (C) allowing it to hang freely.
WARNING: To reduce the risk of fire, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□
Attach the mounting bracket (C) to the outlet box with
two screws and washers provided with the outlet box.
Make sure the mounting bracket (C) is tight and
secured.
C
C
H
D
7
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly — Hanging the Fan (continued)
Making the electrical
connections
3
□
If you wish to install an optional wall control, use this diagram
as a guide but refer to the installation manual for the wall
control for the correct color and wire connections.
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the circuit breaker or main fuse box
before wiring.
PP: Fan wall control
QQ: Light wall control
RR: Fan wall control output wire
SS: Light wall control output wire
WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts, except for the ground wire.
PP
RR
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (DD) supplied with your fan
by wrapping the connections with electrical tape.
JJ
QQ
SS
LL
MM
□
Connect the black (HH) and blue (II) color wires from the
fan to the hot wire (black) (JJ) from the ceiling.
Connect the white (KK) color wire from the fan to the
neutral wire (white) (LL) from the ceiling.
C
□
If there is a ground wire (MM) (green color or bare copper
color) in your outlet box, connect the green wire (NN)
from the fan to it. If there is not a ground wire in your
outlet box, connect the green wire (NN) from the fan to
the green wire (OO) from the mounting bracket (C).
Secure the wire connection with the plastic wire nuts (DD).
SS
RR
MM
OO
LL
HH
DD
II
KK
NN
C
JJ
MM
NN
OO
LL
HH
II
DD
D
KK
D
8
Assembly — Hanging the Fan (continued)
Attaching the fan motor assembly
to the mounting bracket
Remove one of the four screws (TT) on the mounting
bracket (C) and loosen, but do not remove, the other
three screws (TT).
Finishing the fan installation
5
4
□
□
Align the four large screwheads (UU) pre-locked on the fan
housing (E) to the key holes (1) of the mounting bracket (C).
□
Turn the fan housing (E) at the right side and twist the
screwheads (UU) to the end of the slotted holes (2) until they
lock in place and no longer turn.
□
□
Remove the motor assembly (D) from the J hook.
Lift and place the key holes (1) on the mounting plate
(H) over the three screws previously loosened on the
mounting bracket (C) and turn the mounting plate (H)
until it locks in place and no longer turns.
WARNING: Ensure you complete this step correctly and
follow all steps. Failure to correctly follow this step might
cause the fan to fall.
□
Secure by tightening the three screws previously
loosened and the screw (TT) previously removed.
2
C
1
C
H
1
UU
D
TT
E
9
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly — Attaching the Fan Blades
Fastening the blade
assemblies to the motor
Attach the fan blades (A) to the blade bracket (B) using
the blade screws (AA) and ꢀber washers (BB). Tighten
the screws (AA) securely.
6
□
AA
BB
□
□
Remove the ten blade bracket screws (CC) from the
bottom of the motor.
Align the motor holes to the blade bracket (B) and
secure with the blade bracket screws (CC). Tighten
the screws (CC) securely.
A
□
Repeat this procedure with the remaining blade
assemblies.
B
CC
Assembly — Installing the Light Kit
Finish the light kit assembly
and glass shades mounting
7
□
Disassemble the switch house cover (I) by removing
the three screws (VV) on the switch house (J).
J
I
VV
□
Remove the three screws (WW) in the light kit (F). While
holding the light kit assembly under your fan, snap
together the wire connection plugs (XX).
□
□
Carefully push all wires back into the switch house (J),
then install the light kit assembly (F) onto the switch
house (J) with the three screws (WW) removed and
securely tighten all screws.
To install light kit glass shade (G), loosen the light kit
screws (YY) and install the glass shade (G) to the light
kit (F). Secure by tightening the light kit screws (YY)
previously loosened.
J
XX
F
EE
□
□
Install 3×60W A15C bulbs (GG) (included).
WW
Attach the pull chain fob (EE) to the chain on the switch
house (J) and the light kit assembly (F).
YY
G
□
Restore power and your light kit is ready for use.
EE
GG
10
Operation
Turn on the power and check the operation of your fan.
There are two pull chains available in your fan.
The fan pull chain controls the fan speed as follows:
1 pull- High, 2 pulls- Medium, 3 pulls- Low, and 4 pulls- Off.
The light kit pull chain turns the light “ON” or “OFF”
The reverse switch is located on the surface of the switch housing.
This switch controls directions: forward (switch down) or reverse
(switch up).
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
Warm weather - (Counterclockwise Direction) A downward air flow
creates a cooling effect. This allows you to set your air conditioner
on a higher setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air flow moves
warm air off the ceiling. This allows you to set your heating unit on
a lower setting without affecting your comfort.
Care and Cleaning
Do
Do not
□
Check the support connections, brackets, and blade
attachments twice a year. Ensure they are secure.
Because of the fan’s natural movement, some
connections may become loose over time. It is not
necessary to remove the fan from the ceiling.
□
Do not use water when cleaning. Water could damage the
motor, or the wood, or possibly cause an electrical shock.
□
Do not apply oil to your fan or motor. The motor has
permanently-lubricated sealed ball bearings.
□
Clean your fan periodically. Use only a soft brush or
lint-free cloth to avoid scratching the finish. The plating is
sealed with a lacquer to minimize discoloration or
tarnishing.
□
□
(Optional) Apply a light coat of furniture polish to the wood
blades.
(Optional) Cover small scratches with a light application of
shoe polish.
11
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Troubleshooting
WARNING: Ensure the power is off at the electrical
panel box before you attempt any repairs. Refer to the section
“Making the Electrical Connections” on page 8.
Problem
Solution
□
□
□
Check the main and branch circuit fuses or breakers.
Check the line wire connections to the fan and switch wire connections in the switch housing.
The fan will not start.
Check to ensure the dip switches from the remote control and receiver are set to the same
frequency.
□
□
□
Ensure all motor housing screws are snug.
Ensure the screws that attach the fan blade arm to the motor hub are tight.
Ensure wire nut connections are not rattling against each other or the interior wall of the switch
housing.
□
□
Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this
time.
The fan sounds noisy.
If using the ceiling light kit, ensure the screws securing the glassware are tight. Check that the light
bulb is also secure.
□
□
Ensure there is a short distance from the ceiling to the canopy. It should not touch the ceiling.
Ensure your ceiling box is secure and rubber isolator pads are used between the mounting bracket
and outlet box.
□
□
Check that all blade and blade arm screws are secure.
Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a
point on the ceiling above the tip of one of the blades. Measure from a point on the center of each blade
to the point on the ceiling. Rotate the fan until the next blade is positioned for measurement. Repeat for
each blade. Measurements deviation should be within 1/8 in. Run the fan for 10 minutes.
The fan wobbles.
□
Use the enclosed blade balancing kit if the blade wobble is still noticeable.
12
Service Parts
AA
BB
CC
EE
D
E
FF
A
B
F
GG
DD
C
G
Part Description
Part Description
AA Blade screw
BB Fiber washer
A
B
C
D
E
F
Blade
Blade bracket
Mounting bracket
Fan motor assembly
Fan housing
CC Blade bracket screw
DD Plastic wire nut
EE Pull chain fob
Light kit assembly
Glass shade
FF Balancing kit
G
GG 60W A15C bulb
13
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts?
Before returning to the store, call Customer Service
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.
|