7544BL
by
Cal-Max™&
Weight Scale
®
Leading the Way in Accuracy
Instruction Manual
HOW BMI WORKS:
The scale will calculate your BMI based on your height and weight.
Once you input your height into the scale and step on the platform, the scale
will display your weight and your BMI number.
Body Mass Index (BMI) – Why Measure It?
Maintaining proper weight is essential to healthy living. Obesity has been
linked to a higher risk of heart disease, diabetes and some forms of cancer.
The Body Mass Index (BMI) is calculated from a person's weight and height,
and is a widely accepted measurement of weight by most.
IMPORTANT: Always consult a physician before beginning any diet or
exercise program.
BATTERY INFORMATION AND GENERAL SET-UP
2. Remove plastic strip.
Ensure the + sign is up.
3. Position scale on flat
surface.
1. Select weight mode.
This scale operates on 1 CR2032 lithium battery (installed).
Please remove any plastic strips from the battery compartment before con-
tinuing with these instructions.
Some models have a static cling label on the lens to prevent scratching.
Please remove before use.
Your scale has been set to measure in pounds and inches
(LB). To change the measurement units to kilograms/centimeters, move the
switch on the top side of the scale base to the left or right position (kg).
When the LCD displays “Lo”, replace the battery with the “+” sign up.
The scale needs to be initialized before first use or after
battery replacement. Press lightly on the scale platform.
The display will turn on and off. Your scale is now ready
for use.
Tap to initialize
PLEASE NOTE: Illustrations are for general reference
only. The design and displays for this scale may differ slightly.
3
WEIGHT ONLY OPERATION
Your Taylor® Cal-Max™ Scale will operate as a basic weight-reading scale.
No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on
the scale to obtain your current weight. For a weight only reading
1. Place the scale on a flat, hard
surface. Carpeted or uneven
floors may affect accuracy.
2. Step onto the scale platform
and remain still.
3. The scale will count up to
your weight. The display will
flash three times when the
weight is locked. Your weight
is now displayed.
4. The scale will automatically turn off.
USING YOUR CAL-MAX™ SCALE
In order for your Cal-Max™ scale to estimate your calories and compute
your BMI number, you must first enter your height, age, gender and an
activity level selection. The scale uses these factors to calculate your results.
Onscreen prompts will lead you through programming your personal infor-
mation into the scale. The analyzer will then use this data to compute your
results.
REMINDER: The scale needs to be initialized after battery installation. The
scale may also need to be initialized if it is moved or bumped. At all other
times, you may directly proceed with the following instructions for program-
ming your personal data into the scale.
To initialize the scale, simply press lightly on the scale platform. The display
will turn on and off. Your scale is now ready for use.
HOW TO ENTER PERSONAL DATA INTO MEMORY
This scale has 12 personal memory numbers (1-12). There is also a Guest
option for one time use (appears as GUES onscreen). In order to estimate
calories and compute BMI, you must first save your height, age, gender and
an activity level selection into memory. The scale will then use these factors
to calculate your Cal-Max and BMI results.
You will store your data into memory before first use, thus eliminating the
need to enter your personal information before each reading. (Note: the
Guest option does not store the data). To enter your data into memory:
4
1. Press the SET button to turn the scale on.
A memory number (1-12) will blink.
2. Press the (▲) or (▼) button to select a memory.
Press the SET button to confirm. The height digits blink.
3. Press the (▲) or (▼) button to increase / decrease the height value.
Press the SET button to confirm displayed height. The gender digits blink.
4. Press the (▲) or (▼) button to toggle between the male and female icons.
Press the SET button to confirm gender. The age digits blink.
female icon
male icon
5. Press the (▲) or (▼) button to increase / decrease the age value. Press the
SET button to confirm your age. An activity level number blinks.
activity level
6. Press the (▲) or (▼) button to increase / decrease the activity level.
Select your Activity Level according to the following guidelines:
Level 1 Sedentary / very inactive: little or no exercise
Level 2 Light Activity: exercise/sports 1-3 days a week
Level 3 Moderate Activity: exercise/sports 4-5 days a week
Level 4 Very active: exercise/sports 6-7 days a week
Level 5 Extremely active: physically demanding exercise/sports or
athletic training
Press SET button to confirm your activity level and all other selections.
5
activity level
activity level
memory number
Allow scale to
turn off
7. The memory number will flash an a “MEMORY” icon will appear. The
scale will then automatically turn off. Your personal data is now saved in
memory.
HOW TO TAKE A WEIGHT/CAL-MAX™ READING
1. Press the “SET” button while the scale is off. Press the (▲) or (▼) button
to until your memory displays. Press the “MEM” button. The memory
number flashes.
MEM
2. While the memory number flashes, step onto the scale and remain still.
The scale will show a “8888” pattern while it computes your weight, calo-
rie estimates, and BMI.
3. The scale will count up to your weight. The display will flash three times
when the weight is locked. Your weight is now displayed.
4. Your calorie estimate and BMI will appear under the weight. The results
are repeated three times, then the scale switches off.
weight/BMI
weight/calorie estimate
weight/calorie estimate
5. The scale will turn off automatically if no buttons are pressed within
20 seconds.
TO VIEW PREVIOUS RESULTS
Your scale will save the last measurement results for review. To view previ-
ous results:
Press the “Mem” button.
Press the (▲) or (▼) button until your memory number displays.
Press the “Mem” button. Results will appear three times, then the
scale switches off.
TO CHANGE PERSONAL DATA:
Press the “Set” button.
Press the (▲) or (▼) button until your memory number displays.
Press the “Set” button. The current data displays. Follow the steps in “How
to Enter Personal Data into “Memory” to change the data.
6
BODY MASS INDEX
Maintaining proper weight is essential to healthy living. Obesity has been linked
to a higher risk of heart disease, diabetes and some forms of cancer. The Body
Mass Index (BMI) is the most widely accepted measurement of weight according
to health professionals. Use the chart below to determine your own BMI by
matching your height in the left hand column with your weight in the center.
Anyone, male or female, with a BMI of 25 to 29 is considered over weight and a
body mass index of 30 is considered obese. Remember to eat right and exercise.
WARNING INDICATORS
Err = Initialization error. To correct, press on the plat-
form. The display will show “8888”, then “0.0”, and turn
off. Repeat measurement.
Err1 = Overload Warning. The maximum weighing capaci-
ty of the scale has been exceeded. Remove the weight
immediately; otherwise permanent damage to the scale
will occur.
Lo = Low Battery Warning. Replace the CR 2032 lithium
battery with the “+” sign up.
7
PRECAUTIONS
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains,
use a mild soap. Never use detergents, excess water, treated cloths,
harsh cleaning agents, or sprays. Do not attempt to lubricate or open
scale casing as this will void your warranty.
2. Although your scale is designed to be maintenance-free, it contains sensi-
tive electronic parts. Avoid rough treatment. Do not drop, kick, or jump
on it. Treat it with care to ensure the best performance.
3. This scale is designed to read weights between 25 and 440 lbs / 12 and 200
kgs. To prevent damage, do not place more than 440 lbs / 200 kgs on it.
4. Do not store scale where you store cleaning chemicals. The vapors from
some household products may affect the electronic components of your
scale. Do not store scale on its side.
5. This scale is an extremely sensitive weighing device. In order to prevent
run down of the battery, do not store anything on the scale.
6. Do not dispose of batteries in fire. Batteries may explode or leak. Remove
the battery if the scale will not be used for a long period of time.
7. Should operation of the scale freeze up, remove and reinstall the battery
to resume operation.
FIVE (5) YEAR LIMITED WARRANTY
This scale is warranted against defects in materials of workmanship for
five (5) years for the original purchaser from date of retail purchase. It does
not cover damages or wear resulting from accident, misuse, abuse, commer-
cial use, or unauthorized adjustment and/or repair. Do not return to retailer.
Should this scale require service (or replacement at our option) while under
warranty, please pack the item in the original packaging and return it pre-
paid, along with store receipt showing date of purchase and a note explain-
ing reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
There are no express warranties except as listed above. This warranty gives
you specific legal rights, and you may have other rights which vary from
state to state.
For additional product information, or warranty information in Canada or
©2009 Taylor Precision Products and its affiliated companies, all rights
reserved. Taylor® and Leading the Way in Accuracy® are registered trade-
marks of Taylor Precision Products and its affiliated companies. Cal-Max™
is a trademark of Taylor Precision Products and its affiliated companies. All
rights reserved.
Made to our exact specifications in China. Not Legal for trade.
7544BL 5.09
|